Since I add a bluray disc to my hardware configuration, the following thing happend.

1: When I start the system, It is much slower.
2: K3B take ages to start. I have the "K3B KDE burning tool" screen for at least 1 minute before having the screen with the different projects, the main one that you work with.
3: I can burn DVDs with Brasero but I cant with K3B. I always have the following message:

Code: Select all

Devices
-----------------------
HL-DT-ST BD-RE  BH10LS38 1.00 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, BD-ROM, BD-R, BD-RE, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R séquentiel, DVD-R double couche séquentiel, DVD+R double couche à saut, DVD-RAM, DVD RW à réinscription limitée, DVD-RW séquentiel, DVD+RW, DVD+R, DVD+R double couche, CD-ROM, CD-R, CD-RW, BD-ROM, BD-R séquentiel (SRM), BD-R aléatoire (RRM), BD-RE] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Réinscription restreinte, Saut de couche, Enregistrement aléatoire, Enregistrement séquentiel, Enregistrement séquentiel + POW] [%7]
TSSTcorp CDDVDW SH-222AB SB00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R séquentiel, DVD-R double couche séquentiel, DVD+R double couche à saut, DVD-RAM, DVD RW à réinscription limitée, DVD-RW séquentiel, DVD+RW, DVD+R, DVD+R double couche, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Réinscription restreinte, Saut de couche] [%7]

K3b::DataTrackReader
-----------------------
reading sectors 0 to 3965957 with sector size 2048. Length: 3965958 sectors, 8122281984 bytes.
using buffer size of 128 blocks.
Error while writing to IO device. Current sector is 0.
Read a total of 128 sectors (262144 bytes)

System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.8.4 (4.8.4)
QT Version:  4.8.2
Kernel:      3.2.0-4-amd64


What is wrong? I would like to use K3B as I prefer it to Brasero. What do I need to do to make it work again?

Thanks
vandman

It would appear that K3b is having problems interacting with your Bluray drive. Can you please check the permissions of /dev/sr* to ensure you have write access to the device?