K3B detects dvd-r, doesn't detect dvd-r • KDE Community Forums

This forum has been archived. All content is frozen. Please use KDE Discuss instead.

Board index

K3B detects dvd-r, doesn't detect dvd-r

Page 1 of 1 (10 posts)

Tags:

jeremyray Registered Member Posts 5 Karma 0	K3B detects dvd-r, doesn't detect dvd-r Wed Feb 13, 2013 12:41 am K3B initially detects a blank dvd-r disks and lists all the info about it. When I'm ready to burn my project however, the disk fails to show up in the "Burn Medium" window. I get "Please insert an empty or appendable medium." I've tried a couple disk, and the drive shows up in K3B settings. I'm using Kubuntu 12.10.
bcooksley Administrator Posts 19765 Karma 87 OS	Re: K3B detects dvd-r, doesn't detect dvd-r Wed Feb 13, 2013 5:51 am Please run the following command: Code: Select all `solid-hardware query 'IS OpticalDrive'` For each "udi = '/org/freedesktop/UDisks/devices/deviceName0'" it provides, take the "/org/freedesktop/UDisks/devices/deviceName0" part and pass it to the following command as follows: Code: Select all `solid-hardware details /org/freedesktop/UDisks/devices/deviceName0` Please paste the output of the "solid-hardware details" commands here. KDE Sysadmin [img]content/bcooksley_sig.png[/img]
jeremyray Registered Member Posts 5 Karma 0	Re: K3B detects dvd-r, doesn't detect dvd-r Thu Feb 14, 2013 12:37 am Here's what I got back - Code: Select all udi = '/org/freedesktop/UDisks/devices/sr0' parent = '/org/freedesktop/UDisks' (string) vendor = 'ATAPI' (string) product = 'ATAPI iHAS124 B' (string) description = 'CD-RW/DVDÂ±RW DL Drive' (string) Block.major = 11 (0xb) (int) Block.minor = 0 (0x0) (int) Block.device = '/dev/sr0' (string) StorageDrive.bus = 'Scsi' (0x3) (enum) StorageDrive.driveType = 'CdromDrive' (0x1) (enum) StorageDrive.removable = true (bool) StorageDrive.hotpluggable = false (bool) StorageDrive.inUse = false (bool) StorageDrive.size = 2048 (0x800) (qulonglong) OpticalDrive.supportedMedia = 'Cdr\|Cdrw\|Dvd\|Dvdr\|Dvdrw\|Dvdram\|Dvdplusr\|Dvdplusrw\|Dvdplusdl' (0x1ff) (flag) OpticalDrive.readSpeed = 0 (0x0) (int) OpticalDrive.writeSpeed = 0 (0x0) (int) OpticalDrive.writeSpeeds = {} (int list)
bcooksley Administrator Posts 19765 Karma 87 OS	Re: K3B detects dvd-r, doesn't detect dvd-r Thu Feb 14, 2013 8:03 am The size reading of 2048 is slightly concerning, did you have a blank disc in there at the time? That output otherwise looks fine. If you perform a disc burn manually (using CLI tools) do they work? KDE Sysadmin [img]content/bcooksley_sig.png[/img]
jeremyray Registered Member Posts 5 Karma 0	Re: K3B detects dvd-r, doesn't detect dvd-r Fri Feb 15, 2013 3:10 am There's a disk in it. Need to take that out . . . I wouldn't know how to burn from the command line.
bcooksley Administrator Posts 19765 Karma 87 OS	Re: K3B detects dvd-r, doesn't detect dvd-r Fri Feb 15, 2013 6:00 am The following seems like it may have some information on using 'wodim' at least: http://linuxconfig.org/using-command-li ... -iso-image KDE Sysadmin [img]content/bcooksley_sig.png[/img]
jeremyray Registered Member Posts 5 Karma 0	Re: K3B detects dvd-r, doesn't detect dvd-r Tue Feb 19, 2013 1:17 am I made an .iso with K3B and tried burning with Wodim. It threw an error that looks like Wodim thinks the dvd+r disk is a cdr, but Wodim appears to have found the drive o.k. Here's the error output - TOC Type: 1 = CD-ROM wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. scsidev: '/dev/sg2' devname: '/dev/sg2' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.34 Wodim version: 1.1.11 SCSI buffer size: 64512 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'ATAPI ' Identification : 'iHAS124 B ' Revision : 'AL0S' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x001B (DVD+R) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) (current) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1210368 = 1182 KB Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. FIFO size : 12582912 = 12288 KB Track 01: data 6606 MB Total size: 7587 MB (751:39.80) = 3382485 sectors Lout start: 7587 MB (751:41/60) = 3382485 sectors Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: -1087381 wodim: WARNING: Data may not fit on current disk. wodim: Notice: Most recorders cannot write CD's >= 90 minutes. wodim: Notice: Use -ignsize option to allow >= 90 minutes. wodim: Notice: Use -overburn option to write more than the official disk capacity. wodim: Notice: Most CD-writers do overburning only on SAO or RAW mode.
bcooksley Administrator Posts 19765 Karma 87 OS	Re: K3B detects dvd-r, doesn't detect dvd-r Tue Feb 19, 2013 3:22 am From my interpretation, wodim is detecting a DVD+R disc in the drive: Code: Select all `Current: 0x001B (DVD+R)` However, the following indicates that this disc has possibly been written to before: Code: Select all `Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: -1087381` As DVD+R discs can only be written in a particular location once, there is insufficient space on the disc in this instance from what I can tell. Can you please try a new DVD+R disc? KDE Sysadmin [img]content/bcooksley_sig.png[/img]
jeremyray Registered Member Posts 5 Karma 0	Re: K3B detects dvd-r, doesn't detect dvd-r Sat Feb 23, 2013 10:42 pm I've tried two more disks with the same result.
bcooksley Administrator Posts 19765 Karma 87 OS	Re: K3B detects dvd-r, doesn't detect dvd-r Sun Feb 24, 2013 9:18 pm Based on the errors given by wodim, can you verify that the image you are trying to write is below 4gb in size? KDE Sysadmin [img]content/bcooksley_sig.png[/img]

Page 1 of 1 (10 posts)

Bookmarks

Who is online

Registered users: Bing [Bot], Evergrowing, Google [Bot], rblackwell