Hello folks,

every time i start mumble, all sounds (firefox, vlc, kde system sounds, etc...) gets heavy distorted, the problem disappears automatically after 5-10 minutes.

yes i have a special sound setup with 3 sound cards, because my windows PC is looped through so i don't need to unplug and plugin again whens switching to windows, but this problem only starts with mumble

Code: Select all

:~$ aplay -L
default
    Playback/recording through the PulseAudio sound server
null
    Discard all samples (playback) or generate zero samples (capture)
pulse
    PulseAudio Sound Server
sysdefault:CARD=SB
    HDA ATI SB, ALC889 Analog
    Default Audio Device
front:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    Front speakers
surround21:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Digital
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    Direct sample mixing device
dmix:CARD=SB,DEV=1
    HDA ATI SB, ALC889 Digital
    Direct sample mixing device
dsnoop:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    Direct sample snooping device
dsnoop:CARD=SB,DEV=1
    HDA ATI SB, ALC889 Digital
    Direct sample snooping device
hw:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    Direct hardware device without any conversions
hw:CARD=SB,DEV=1
    HDA ATI SB, ALC889 Digital
    Direct hardware device without any conversions
plughw:CARD=SB,DEV=0
    HDA ATI SB, ALC889 Analog
    Hardware device with all software conversions
plughw:CARD=SB,DEV=1
    HDA ATI SB, ALC889 Digital
    Hardware device with all software conversions
hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 1
    HDMI Audio Output
dmix:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 0
    Direct sample mixing device
dmix:CARD=NVidia,DEV=7
    HDA NVidia, HDMI 1
    Direct sample mixing device
dsnoop:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 0
    Direct sample snooping device
dsnoop:CARD=NVidia,DEV=7
    HDA NVidia, HDMI 1
    Direct sample snooping device
hw:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 0
    Direct hardware device without any conversions
hw:CARD=NVidia,DEV=7
    HDA NVidia, HDMI 1
    Direct hardware device without any conversions
plughw:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 0
    Hardware device with all software conversions
plughw:CARD=NVidia,DEV=7
    HDA NVidia, HDMI 1
    Hardware device with all software conversions
sysdefault:CARD=Creative
    HDA Creative, ALC898 Analog
    Default Audio Device
front:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    Front speakers
surround21:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    Direct sample mixing device
dsnoop:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    Direct sample snooping device
hw:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    Direct hardware device without any conversions
plughw:CARD=Creative,DEV=0
    HDA Creative, ALC898 Analog
    Hardware device with all software conversions
sysdefault:CARD=DG
    Xonar DG, Multichannel
    Default Audio Device
front:CARD=DG,DEV=0
    Xonar DG, Multichannel
    Front speakers
surround21:CARD=DG,DEV=0
    Xonar DG, Multichannel
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=DG,DEV=0
    Xonar DG, Multichannel
    4.0 Surround output to Front and Rear speakers
surround41:CARD=DG,DEV=0
    Xonar DG, Multichannel
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=DG,DEV=0
    Xonar DG, Multichannel
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=DG,DEV=0
    Xonar DG, Multichannel
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=DG,DEV=0
    Xonar DG, Multichannel
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=DG,DEV=0
    Xonar DG, Multichannel
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=DG,DEV=0
    Xonar DG, Multichannel
    Direct sample mixing device
dmix:CARD=DG,DEV=1
    Xonar DG, Digital
    Direct sample mixing device
dsnoop:CARD=DG,DEV=0
    Xonar DG, Multichannel
    Direct sample snooping device
dsnoop:CARD=DG,DEV=1
    Xonar DG, Digital
    Direct sample snooping device
hw:CARD=DG,DEV=0
    Xonar DG, Multichannel
    Direct hardware device without any conversions
hw:CARD=DG,DEV=1
    Xonar DG, Digital
    Direct hardware device without any conversions
plughw:CARD=DG,DEV=0
    Xonar DG, Multichannel
    Hardware device with all software conversions
plughw:CARD=DG,DEV=1
    Xonar DG, Digital
    Hardware device with all software conversions



Code: Select all

:~$ pactl list
Module #0
        Name: module-device-restore
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore the volume/mute state of devices"
                module.version = "11.1"

Module #1
        Name: module-stream-restore
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore the volume/mute/device state of streams"
                module.version = "11.1"

Module #2
        Name: module-card-restore
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore profile of cards"
                module.version = "11.1"

Module #3
        Name: module-augment-properties
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Augment the property sets of streams with additional static information"
                module.version = "11.1"

Module #4
        Name: module-switch-on-port-available
        Argument:
        Usage counter: n/a
        Properties:


Module #5
        Name: module-switch-on-connect
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Michael Terry"
                module.description = "When a sink/source is added, switch to it or conditionally switch to it"
                module.version = "11.1"

Module #6
        Name: module-udev-detect
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Detect available audio hardware and load matching drivers"
                module.version = "11.1"

Module #7
        Name: module-alsa-card
        Argument: device_id="2" name="pci-0000_05_00.0" card_name="alsa_card.pci-0000_05_00.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
        Usage counter: 0
        Properties:
                module.author = "Lennart Poettering"
                module.description = "ALSA Card"
                module.version = "11.1"

Module #8
        Name: module-alsa-card
        Argument: device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
        Usage counter: 1
        Properties:
                module.author = "Lennart Poettering"
                module.description = "ALSA Card"
                module.version = "11.1"

Module #9
        Name: module-alsa-card
        Argument: device_id="3" name="pci-0000_06_06.0" card_name="alsa_card.pci-0000_06_06.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"
        Usage counter: 0
        Properties:
                module.author = "Lennart Poettering"
                module.description = "ALSA Card"
                module.version = "11.1"

Module #10
        Name: module-bluetooth-policy
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Frédéric Dalleau, Pali Rohár"
                module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
                module.version = "11.1"

Module #11
        Name: module-bluetooth-discover
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "João Paulo Rechi Vita"
                module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
                module.version = "11.1"

Module #12
        Name: module-bluez5-discover
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "João Paulo Rechi Vita"
                module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
                module.version = "11.1"

Module #13
        Name: module-native-protocol-unix
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Native protocol (UNIX sockets)"
                module.version = "11.1"

Module #14
        Name: module-gconf
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "GConf Adapter"
                module.version = "11.1"

Module #15
        Name: module-device-manager
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Colin Guthrie"
                module.description = "Keep track of devices (and their descriptions) both past and present and prioritise by role"
                module.version = "11.1"

Module #16
        Name: module-default-device-restore
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Automatically restore the default sink and source"
                module.version = "11.1"

Module #17
        Name: module-rescue-streams
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
                module.version = "11.1"

Module #18
        Name: module-always-sink
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Colin Guthrie"
                module.description = "Always keeps at least one sink loaded even if it's a null one"
                module.version = "11.1"

Module #19
        Name: module-intended-roles
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Automatically set device of streams based on intended roles of devices"
                module.version = "11.1"

Module #20
        Name: module-suspend-on-idle
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "When a sink/source is idle for too long, suspend it"
                module.version = "11.1"

Module #21
        Name: module-console-kit
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Create a client for each ConsoleKit session of this user"
                module.version = "11.1"

Module #22
        Name: module-systemd-login
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Create a client for each login session of this user"
                module.version = "11.1"

Module #23
        Name: module-position-event-sounds
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
                module.version = "11.1"

Module #24
        Name: module-role-cork
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Mute & cork streams with certain roles while others exist"
                module.version = "11.1"

Module #25
        Name: module-filter-heuristics
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Colin Guthrie"
                module.description = "Detect when various filters are desirable"
                module.version = "11.1"

Module #26
        Name: module-filter-apply
        Argument:
        Usage counter: n/a
        Properties:
                module.author = "Colin Guthrie"
                module.description = "Load filter sinks automatically when needed"
                module.version = "11.1"

Module #27
        Name: module-x11-publish
        Argument: display=:0
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "X11 credential publisher"
                module.version = "11.1"

Module #28
        Name: module-x11-cork-request
        Argument: display=:0
        Usage counter: n/a
        Properties:
                module.author = "Lennart Poettering"
                module.description = "Synthesize X11 media key events when cork/uncork is requested"
                module.version = "11.1"

Sink #0
        State: SUSPENDED
        Name: alsa_output.pci-0000_05_00.0.analog-stereo
        Description: Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 7
        Mute: no
        Volume: front-left: 30129 /  46% / -20.25 dB,   front-right: 30129 /  46% / -20.25 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_05_00.0.analog-stereo.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC898 Analog"
                alsa.id = "ALC898 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "2"
                alsa.card_name = "HDA Creative"
                alsa.long_card_name = "HDA Creative at 0xfe404000 irq 40"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:05:00.0"
                sysfs.path = "/devices/pci0000:00/0000:00:0b.0/0000:05:00.0/sound/card2"
                device.bus = "pci"
                device.vendor.id = "1102"
                device.vendor.name = "Creative Labs"
                device.product.id = "0012"
                device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
                device.string = "front:2"
                device.buffering.buffer_size = "65536"
                device.buffering.fragment_size = "32768"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Analog Stereo"
                alsa.mixer_name = "Realtek ALC898"
                alsa.components = "HDA:10ec0899,11020041,00100003"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-output-lineout: Line Out (priority: 9900, available)
                analog-output-headphones: Headphones (priority: 9000, not available)
        Active Port: analog-output-lineout
        Formats:
                pcm

Sink #1
        State: RUNNING
        Name: alsa_output.pci-0000_00_14.2.analog-stereo
        Description: Built-in Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 8
        Mute: no
        Volume: front-left: 25304 /  39% / -24.80 dB,   front-right: 25304 /  39% / -24.80 dB
                balance 0.00
        Base Volume: 60694 /  93% / -2.00 dB
        Monitor Source: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
        Latency: 39420 usec, configured 40000 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC889 Analog"
                alsa.id = "ALC889 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA ATI SB"
                alsa.long_card_name = "HDA ATI SB at 0xfe700000 irq 16"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:14.2"
                sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "4383"
                device.product.name = "SBx00 Azalia (Intel HDA)"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "65536"
                device.buffering.fragment_size = "32768"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Built-in Audio Analog Stereo"
                alsa.mixer_name = "Realtek ALC889"
                alsa.components = "HDA:10ec0889,1458a132,00100004"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-output-lineout: Line Out (priority: 9900, available)
                analog-output-headphones: Headphones (priority: 9000, not available)
        Active Port: analog-output-lineout
        Formats:
                pcm

Sink #2
        State: SUSPENDED
        Name: alsa_output.pci-0000_06_06.0.analog-stereo
        Description: CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 9
        Mute: no
        Volume: front-left: 34142 /  52% / -16.99 dB,   front-right: 34142 /  52% / -16.99 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor Source: alsa_output.pci-0000_06_06.0.analog-stereo.monitor
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "Multichannel"
                alsa.id = "Multichannel"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "3"
                alsa.card_name = "Xonar DG"
                alsa.long_card_name = "C-Media Oxygen HD Audio at 0xc000, irq 20"
                alsa.driver_name = "snd_oxygen"
                device.bus_path = "pci-0000:06:06.0"
                sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:06:06.0/sound/card3"
                device.bus = "pci"
                device.vendor.id = "13f6"
                device.vendor.name = "C-Media Electronics Inc"
                device.product.id = "8788"
                device.product.name = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
                device.string = "front:3"
                device.buffering.buffer_size = "384000"
                device.buffering.fragment_size = "384000"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo"
                alsa.mixer_name = "CMI8786"
                alsa.components = "CS4245 CMI8786"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-output-headphones: Headphones (priority: 9000)
        Active Port: analog-output-headphones
        Formats:
                pcm

Source #0
        State: SUSPENDED
        Name: alsa_output.pci-0000_05_00.0.analog-stereo.monitor
        Description: Monitor of Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 7
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor of Sink: alsa_output.pci-0000_05_00.0.analog-stereo
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY
        Properties:
                device.description = "Monitor of Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Analog Stereo"
                device.class = "monitor"
                alsa.card = "2"
                alsa.card_name = "HDA Creative"
                alsa.long_card_name = "HDA Creative at 0xfe404000 irq 40"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:05:00.0"
                sysfs.path = "/devices/pci0000:00/0000:00:0b.0/0000:05:00.0/sound/card2"
                device.bus = "pci"
                device.vendor.id = "1102"
                device.vendor.name = "Creative Labs"
                device.product.id = "0012"
                device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
                device.string = "2"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Formats:
                pcm

Source #1
        State: SUSPENDED
        Name: alsa_input.pci-0000_05_00.0.analog-stereo
        Description: Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 7
        Mute: no
        Volume: front-left: 22379 /  34% / -28.00 dB,   front-right: 22379 /  34% / -28.00 dB
                balance 0.00
        Base Volume: 6554 /  10% / -60.00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC898 Analog"
                alsa.id = "ALC898 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "2"
                alsa.card_name = "HDA Creative"
                alsa.long_card_name = "HDA Creative at 0xfe404000 irq 40"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:05:00.0"
                sysfs.path = "/devices/pci0000:00/0000:00:0b.0/0000:05:00.0/sound/card2"
                device.bus = "pci"
                device.vendor.id = "1102"
                device.vendor.name = "Creative Labs"
                device.product.id = "0012"
                device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
                device.string = "front:2"
                device.buffering.buffer_size = "65536"
                device.buffering.fragment_size = "32768"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Analog Stereo"
                alsa.mixer_name = "Realtek ALC898"
                alsa.components = "HDA:10ec0899,11020041,00100003"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-input-front-mic: Front Microphone (priority: 8500, not available)
                analog-input-rear-mic: Rear Microphone (priority: 8200, not available)
                analog-input-linein: Line In (priority: 8100, available)
        Active Port: analog-input-linein
        Formats:
                pcm

Source #2
        State: IDLE
        Name: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
        Description: Monitor of Built-in Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 8
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor of Sink: alsa_output.pci-0000_00_14.2.analog-stereo
        Latency: 0 usec, configured 341333 usec
        Flags: DECIBEL_VOLUME LATENCY
        Properties:
                device.description = "Monitor of Built-in Audio Analog Stereo"
                device.class = "monitor"
                alsa.card = "0"
                alsa.card_name = "HDA ATI SB"
                alsa.long_card_name = "HDA ATI SB at 0xfe700000 irq 16"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:14.2"
                sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "4383"
                device.product.name = "SBx00 Azalia (Intel HDA)"
                device.form_factor = "internal"
                device.string = "0"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Formats:
                pcm

Source #3
        State: SUSPENDED
        Name: alsa_input.pci-0000_00_14.2.analog-stereo
        Description: Built-in Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 8
        Mute: no
        Volume: front-left: 10794 /  16% / -47.00 dB,   front-right: 10794 /  16% / -47.00 dB
                balance 0.00
        Base Volume: 6554 /  10% / -60.00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC889 Analog"
                alsa.id = "ALC889 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA ATI SB"
                alsa.long_card_name = "HDA ATI SB at 0xfe700000 irq 16"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:14.2"
                sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "4383"
                device.product.name = "SBx00 Azalia (Intel HDA)"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "65536"
                device.buffering.fragment_size = "32768"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Built-in Audio Analog Stereo"
                alsa.mixer_name = "Realtek ALC889"
                alsa.components = "HDA:10ec0889,1458a132,00100004"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-input-front-mic: Front Microphone (priority: 8500, not available)
                analog-input-rear-mic: Rear Microphone (priority: 8200, not available)
                analog-input-linein: Line In (priority: 8100, available)
        Active Port: analog-input-linein
        Formats:
                pcm

Source #4
        State: SUSPENDED
        Name: alsa_output.pci-0000_06_06.0.analog-stereo.monitor
        Description: Monitor of CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 9
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Base Volume: 65536 / 100% / 0.00 dB
        Monitor of Sink: alsa_output.pci-0000_06_06.0.analog-stereo
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY
        Properties:
                device.description = "Monitor of CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo"
                device.class = "monitor"
                alsa.card = "3"
                alsa.card_name = "Xonar DG"
                alsa.long_card_name = "C-Media Oxygen HD Audio at 0xc000, irq 20"
                alsa.driver_name = "snd_oxygen"
                device.bus_path = "pci-0000:06:06.0"
                sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:06:06.0/sound/card3"
                device.bus = "pci"
                device.vendor.id = "13f6"
                device.vendor.name = "C-Media Electronics Inc"
                device.product.id = "8788"
                device.product.name = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
                device.string = "3"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Formats:
                pcm

Source #5
        State: SUSPENDED
        Name: alsa_input.pci-0000_06_06.0.analog-stereo
        Description: CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 9
        Mute: no
        Volume: front-left: 46560 /  71% / -8.91 dB,   front-right: 46560 /  71% / -8.91 dB
                balance 0.00
        Base Volume: 41350 /  63% / -12.00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "Multichannel"
                alsa.id = "Multichannel"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "3"
                alsa.card_name = "Xonar DG"
                alsa.long_card_name = "C-Media Oxygen HD Audio at 0xc000, irq 20"
                alsa.driver_name = "snd_oxygen"
                device.bus_path = "pci-0000:06:06.0"
                sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:06:06.0/sound/card3"
                device.bus = "pci"
                device.vendor.id = "13f6"
                device.vendor.name = "C-Media Electronics Inc"
                device.product.id = "8788"
                device.product.name = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
                device.string = "front:3"
                device.buffering.buffer_size = "131072"
                device.buffering.fragment_size = "131072"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG)) Analog Stereo"
                alsa.mixer_name = "CMI8786"
                alsa.components = "CS4245 CMI8786"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-input-front-mic: Front Microphone (priority: 8500)
                analog-input-mic: Microphone (priority: 8700)
                analog-input-linein: Line In (priority: 8100)
                analog-input-aux: Analog Input (priority: 8000)
        Active Port: analog-input-mic
        Formats:
                pcm

Sink Input #141
        Driver: protocol-native.c
        Owner Module: 13
        Client: 42
        Sink: 1
        Sample Specification: float32le 2ch 44100Hz
        Channel Map: front-left,front-right
        Format: pcm, format.rate = "44100"  format.sample_format = "\"float32le\""  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
        Corked: no
        Mute: no
        Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
                balance 0.00
        Buffer Latency: 1120566 usec
        Sink Latency: 38917 usec
        Resample method: speex-float-1
        Properties:
                media.role = "video"
                media.name = "audio stream"
                application.name = "VLC media player (LibVLC 3.0.8)"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "32"
                application.id = "org.VideoLAN.VLC"
                application.version = "3.0.8"
                application.icon_name = "vlc"
                application.language = "C"
                application.process.id = "5007"
                application.process.user = "marrap"
                application.process.host = "wrk-hof-raps1"
                application.process.binary = "vlc"
                window.x11.display = ":0"
                application.process.machine_id = "50a9eb66d7f84628a9b4986f2f3af680"
                application.process.session_id = "3"
                module-stream-restore.id = "sink-input-by-media-role:video"

Client #0
        Driver: module-systemd-login.c
        Owner Module: 22
        Properties:
                application.name = "Login Session 3"
                systemd-login.session = "3"

Client #4
        Driver: protocol-native.c
        Owner Module: 13
        Properties:
                application.name = "QPulse"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "32"
                application.process.id = "2307"
                application.process.user = "marrap"
                application.process.host = "wrk-hof-raps1"
                application.process.binary = "plasmashell"
                application.language = "C"
                window.x11.display = ":0"
                application.process.machine_id = "50a9eb66d7f84628a9b4986f2f3af680"
                application.process.session_id = "3"

Client #7
        Driver: protocol-native.c
        Owner Module: 13
        Properties:
                application.name = "Firefox"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "32"
                application.icon_name = "firefox"
                application.version = "74.0"
                application.process.id = "2720"
                application.process.user = "marrap"
                application.process.host = "wrk-hof-raps1"
                application.process.binary = "firefox"
                application.language = "C"
                window.x11.display = ":0"
                application.process.machine_id = "50a9eb66d7f84628a9b4986f2f3af680"
                application.process.session_id = "3"

Client #8
        Driver: protocol-native.c
        Owner Module: 13
        Properties:
                application.name = "libcanberra"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "32"
                application.version = "0.30"
                application.id = "org.freedesktop.libcanberra"
                application.process.id = "2307"
                application.process.user = "marrap"
                application.process.host = "wrk-hof-raps1"
                application.process.binary = "plasmashell"
                application.language = "C"
                window.x11.display = ":0"
                application.process.machine_id = "50a9eb66d7f84628a9b4986f2f3af680"
                application.process.session_id = "3"

Client #9
        Driver: protocol-native.c
        Owner Module: 13
        Properties:
                application.name = "Firefox"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "32"
                application.process.id = "2720"
                application.process.user = "marrap"
                application.process.host = "wrk-hof-raps1"
                application.process.binary = "firefox"
                application.language = "C"
                window.x11.display = ":0"
                application.process.machine_id = "50a9eb66d7f84628a9b4986f2f3af680"
                application.process.session_id = "3"
                application.icon_name = "firefox"

Client #42
        Driver: protocol-native.c
        Owner Module: 13
        Properties:
                application.name = "VLC media player (LibVLC 3.0.8)"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "32"
                application.id = "org.VideoLAN.VLC"
                application.version = "3.0.8"
                application.icon_name = "vlc"
                application.language = "C"
                application.process.id = "5007"
                application.process.user = "marrap"
                application.process.host = "wrk-hof-raps1"
                application.process.binary = "vlc"
                window.x11.display = ":0"
                application.process.machine_id = "50a9eb66d7f84628a9b4986f2f3af680"
                application.process.session_id = "3"

Client #81
        Driver: protocol-native.c
        Owner Module: 13
        Properties:
                application.name = "pactl"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "32"
                application.process.id = "10296"
                application.process.user = "marrap"
                application.process.host = "wrk-hof-raps1"
                application.process.binary = "pactl"
                application.language = "en_US.UTF-8"
                window.x11.display = ":0"
                application.process.machine_id = "50a9eb66d7f84628a9b4986f2f3af680"
                application.process.session_id = "3"

Sample #0
        Name: audio-volume-change
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Volume: (invalid)
                balance 0.00
        Duration: 0.1s
        Size: 11.5 KiB
        Lazy: no
        Filename: n/a
        Properties:
                media.role = "event"
                event.id = "audio-volume-change"
                event.description = "Volume Control Feedback Sound"
                media.name = "audio-volume-change"
                media.filename = "/usr/share/sounds/freedesktop/stereo/audio-volume-change.oga"
                application.name = "libcanberra"
                native-protocol.peer = "UNIX socket client"
                native-protocol.version = "32"
                application.version = "0.30"
                application.id = "org.freedesktop.libcanberra"
                application.process.id = "2307"
                application.process.user = "marrap"
                application.process.host = "wrk-hof-raps1"
                application.process.binary = "plasmashell"
                application.language = "C"
                window.x11.display = ":0"
                application.process.machine_id = "50a9eb66d7f84628a9b4986f2f3af680"
                application.process.session_id = "3"

Card #0
        Name: alsa_card.pci-0000_05_00.0
        Driver: module-alsa-card.c
        Owner Module: 7
        Properties:
                alsa.card = "2"
                alsa.card_name = "HDA Creative"
                alsa.long_card_name = "HDA Creative at 0xfe404000 irq 40"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:05:00.0"
                sysfs.path = "/devices/pci0000:00/0000:00:0b.0/0000:05:00.0/sound/card2"
                device.bus = "pci"
                device.vendor.id = "1102"
                device.vendor.name = "Creative Labs"
                device.product.id = "0012"
                device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
                device.string = "2"
                device.description = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
                output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
                output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
                output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
                output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
                output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
                output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
                output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
                output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
                output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-front-mic: Front Microphone (priority: 8500, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo
                analog-input-rear-mic: Rear Microphone (priority: 8200, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo
                analog-input-linein: Line In (priority: 8100, latency offset: 0 usec, available)
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo
                analog-output-lineout: Line Out (priority: 9900, latency offset: 0 usec, available)
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
                analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-headphones"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

Card #1
        Name: alsa_card.pci-0000_00_14.2
        Driver: module-alsa-card.c
        Owner Module: 8
        Properties:
                alsa.card = "0"
                alsa.card_name = "HDA ATI SB"
                alsa.long_card_name = "HDA ATI SB at 0xfe700000 irq 16"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:14.2"
                sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
                device.bus = "pci"
                device.vendor.id = "1002"
                device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
                device.product.id = "4383"
                device.product.name = "SBx00 Azalia (Intel HDA)"
                device.form_factor = "internal"
                device.string = "0"
                device.description = "Built-in Audio"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
                output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
                output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
                output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
                output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
                output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
                output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
                output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
                output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
                output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
                output:analog-surround-71: Analog Surround 7.1 Output (sinks: 1, sources: 0, priority: 700, available: yes)
                output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
                output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
                output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5560, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-front-mic: Front Microphone (priority: 8500, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-input-rear-mic: Rear Microphone (priority: 8200, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-input-linein: Line In (priority: 8100, latency offset: 0 usec, available)
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:analog-surround-71+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-output-lineout: Line Out (priority: 9900, latency offset: 0 usec, available)
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo, output:analog-surround-71, output:analog-surround-71+input:analog-stereo
                analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-headphones"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec)
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

Card #2
        Name: alsa_card.pci-0000_06_06.0
        Driver: module-alsa-card.c
        Owner Module: 9
        Properties:
                alsa.card = "3"
                alsa.card_name = "Xonar DG"
                alsa.long_card_name = "C-Media Oxygen HD Audio at 0xc000, irq 20"
                alsa.driver_name = "snd_oxygen"
                device.bus_path = "pci-0000:06:06.0"
                sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:06:06.0/sound/card3"
                device.bus = "pci"
                device.vendor.id = "13f6"
                device.vendor.name = "C-Media Electronics Inc"
                device.product.id = "8788"
                device.product.name = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
                device.string = "3"
                device.description = "CMI8788 [Oxygen HD Audio] (CMI8786 (Xonar DG))"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
                input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
                output:analog-stereo+input:iec958-stereo: Analog Stereo Output + Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 6055, available: yes)
                output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 700, available: yes)
                output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 760, available: yes)
                output:analog-surround-40+input:iec958-stereo: Analog Surround 4.0 Output + Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 755, available: yes)
                output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 800, available: yes)
                output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 860, available: yes)
                output:analog-surround-51+input:iec958-stereo: Analog Surround 5.1 Output + Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 855, available: yes)
                output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
                output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5560, available: yes)
                output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (sinks: 1, sources: 1, priority: 5555, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-front-mic: Front Microphone (priority: 8500, latency offset: 0 usec)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-input-linein: Line In (priority: 8100, latency offset: 0 usec)
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                analog-input-aux: Analog Input (priority: 8000, latency offset: 0 usec)
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
                iec958-stereo-input: Digital Input (S/PDIF) (priority: 0, latency offset: 0 usec)
                        Part of profile(s): input:iec958-stereo, output:analog-stereo+input:iec958-stereo, output:analog-surround-40+input:iec958-stereo, output:analog-surround-51+input:iec958-stereo, output:iec958-stereo+input:iec958-stereo
                analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec)
                        Properties:
                                device.icon_name = "audio-headphones"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-stereo+input:iec958-stereo
                analog-output: Analog Output (priority: 9900, latency offset: 0 usec)
                        Part of profile(s): output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-40+input:iec958-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo, output:analog-surround-51+input:iec958-stereo
                iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec)
                        Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-stereo+input:iec958-stereo


i set the default-sample-rate to 48000 in /etc/pulse/daemon.conf - without changes
i think the main problen is i use one soundcard for Line-Out and another one for Mic-In an there is a buffer or rate problem

the third soundcard is only a loopback for OBS

Okay

Audio Output -> Output Delay was to low

just raised it from 10ms to 20ms and everything is fine now

set output delay to 20ms and everything will be fixied.