Hi.

Is it me or is KDE v3.5.10's KMix v2.6.1 unmute button broken? I have to use Alsamixergui v1.00 to unmute "Master" stereo speakers for its audio to come back! Mute and volume controls work fine, but not unmute. It seems like KMix is not communicating with my ALSA's PulseAudio onboard audio (lspci showed "00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller").

I am wondering why I don't get audio anymore even if KMix shows audio unmuted and at maximum volumes. At first, I thought my onboard audio was broken in my old Debian or hardware but its newly upgraded Gnome v3 (exited to console, edited ~/.xsession to "exec gnome-session" to switch desktop, and ran startx) had no audio problems even with its own mixer.

I rarely use audio on this old Debian box (from 2005), but it did used to work. I don't know when it stopped working. Maybe it us related to the big Debian's Gnome v3 upgrade (compiz compiz-core compiz-gnome compiz-gtk compiz-plugins evince evince-common file-roller gnome-applets gnome-applets-data gnome-control-center gnome-core gnome-disk-utility gnome-menus gnome-panel gnome-panel-data gnome-power-manager gnome-screensaver gnome-session gnome-session-bin gnome-session-common gnome-settings-daemon gvfs gvfs-backends libglib2.0-dev libgomp1 libquadmath0 libstdc++6 libstdc++6-4.6-dev metacity metacity-common nautilus nautilus-data python-gmenu totem totem-common, etc. It also removed my linux-headers-2.6.32-5-686 gcc-4.3 gcc-4.3-base cpp-4.3 binutils libgcc1 packages) that I got on Tuesday, 11/8/2011?

$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-39) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 3 04:23:54 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 36f86000 - 377bafb8
[ 0.000000] Allocated new RAMDISK: 00100000 - 00934fb8
[ 0.000000] Move RAMDISK from 0000000036f86000 - 00000000377bafb7 to 00100000 - 00934fb7
[ 0.000000] ACPI: RSDP 000f9aa0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ff90000 0003C (v01 7514MS A7514200 20090904 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff90200 00084 (v01 7514MS A7514200 20090904 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff90440 063EE (v01 A7514 A7514200 00000200 INTL 20051117)
[ 0.000000] ACPI: FACS 7ff9e000 00040
[ 0.000000] ACPI: APIC 7ff90390 0006C (v01 7514MS A7514200 20090904 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ff90400 0003C (v01 7514MS OEMMCFG 20090904 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ff9e040 00072 (v01 7514MS A7514200 20090904 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ff98440 00038 (v01 7514MS OEMHPET 20090904 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7ff9e8c0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1163MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014cccf4] TEXT DATA BSS ==> [0001000000 - 00014cccf4]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00014cd000 - 00014d3195] BRK ==> [00014cd000 - 00014d3195]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 0000934fb8] NEW RAMDISK ==> [0000100000 - 0000934fb8]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007ff90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ff90
[ 0.000000] On node 0 totalpages: 524063
[ 0.000000] free_area_init_node: node 0, pgdat c13b4860, node_mem_map c14d5200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2328 pages used for memmap
[ 0.000000] HighMem zone: 295546 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016 u1048576
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519967
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=fe4a1af1-1979-49fb-9668-314a24b12890 ro quiet nouveau.modeset=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007ff90)
[ 0.000000] Memory: 2064196k/2096704k available (2504k kernel code, 30820k reserved, 1328k data, 380k init, 1191496k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272209 - 0xc13be480 (1328 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272209 (2504 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2339.008 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4678.01 BogoMIPS (lpj=9356032)
[ 0.004016] Security Framework initialized
[ 0.004019] SELinux: Disabled at boot.
[ 0.004024] Mount-cache hash table entries: 512
[ 0.004117] Initializing cgroup subsys ns
[ 0.004120] Initializing cgroup subsys cpuacct
[ 0.004123] Initializing cgroup subsys devices
[ 0.004125] Initializing cgroup subsys freezer
[ 0.004127] Initializing cgroup subsys net_cls
[ 0.004144] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004146] CPU: L2 cache: 2048K
[ 0.004149] CPU: Physical Processor ID: 0
[ 0.004150] CPU: Processor Core ID: 0
[ 0.004153] mce: CPU supports 6 MCE banks
[ 0.004160] CPU0: Thermal monitoring enabled (TM2)
[ 0.004162] using mwait in idle threads.
[ 0.004167] Performance Events: Core2 events, Intel PMU driver.
[ 0.004172] ... version: 2
[ 0.004174] ... bit width: 40
[ 0.004175] ... generic registers: 2
[ 0.004177] ... value mask: 000000ffffffffff
[ 0.004178] ... max period: 000000007fffffff
[ 0.004180] ... fixed-purpose events: 3
[ 0.004181] ... event mask: 0000000700000003
[ 0.004184] Checking 'hlt' instruction... OK.
[ 0.021039] ACPI: Core revision 20090903
[ 0.026943] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027248] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066935] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.152052] CPU1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07
[ 0.152058] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156103] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.008000] Initializing CPU#2
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 2
[ 0.008000] CPU2: Thermal monitoring enabled (TM2)
[ 0.244104] CPU2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07
[ 0.244109] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.248080] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.008000] Initializing CPU#3
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 3
[ 0.008000] CPU3: Thermal monitoring enabled (TM2)
[ 0.336058] CPU3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07
[ 0.336064] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340034] Brought up 4 CPUs
[ 0.340036] Total of 4 processors activated (18712.72 BogoMIPS).
[ 0.341610] CPU0 attaching sched-domain:
[ 0.341614] domain 0: span 0-1 level MC
[ 0.341616] groups: group c2803778 cpus 0 group c2903778 cpus 1
[ 0.341620] domain 1: span 0-3 level CPU
[ 0.341622] groups: group c28037e4 cpus 0-1 (cpu_power = 2048) group c2a037e4 cpus 2-3 (cpu_power = 2048)
[ 0.341629] CPU1 attaching sched-domain:
[ 0.341631] domain 0: span 0-1 level MC
[ 0.341633] groups: group c2903778 cpus 1 group c2803778 cpus 0
[ 0.341637] domain 1: span 0-3 level CPU
[ 0.341639] groups: group c28037e4 cpus 0-1 (cpu_power = 2048) group c2a037e4 cpus 2-3 (cpu_power = 2048)
[ 0.341644] CPU2 attaching sched-domain:
[ 0.341646] domain 0: span 2-3 level MC
[ 0.341647] groups: group c2a03778 cpus 2 group c2b03778 cpus 3
[ 0.341651] domain 1: span 0-3 level CPU
[ 0.341653] groups: group c2a037e4 cpus 2-3 (cpu_power = 2048) group c28037e4 cpus 0-1 (cpu_power = 2048)
[ 0.341658] CPU3 attaching sched-domain:
[ 0.341660] domain 0: span 2-3 level MC
[ 0.341662] groups: group c2b03778 cpus 3 group c2a03778 cpus 2
[ 0.341666] domain 1: span 0-3 level CPU
[ 0.341667] groups: group c2a037e4 cpus 2-3 (cpu_power = 2048) group c28037e4 cpus 0-1 (cpu_power = 2048)
[ 0.341765] devtmpfs: initialized
[ 0.341765] regulator: core version 0.5
[ 0.341765] NET: Registered protocol family 16
[ 0.341765] ACPI: bus type pci registered
[ 0.341765] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.341765] PCI: Not using MMCONFIG.
[ 0.341765] PCI: Using configuration type 1 for base access
[ 0.341765] bio: create slab <bio-0> at 0
[ 0.344079] ACPI: EC: Detected MSI hardware, enabling workarounds.
[ 0.344082] ACPI: EC: Look up EC in DSDT
[ 0.346385] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.350833] ACPI: Interpreter enabled
[ 0.350842] ACPI: (supports S0 S1 S4 S5)
[ 0.350858] ACPI: Using IOAPIC for interrupt routing
[ 0.350900] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.353626] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.353628] PCI: Using MMCONFIG for extended config space
[ 0.360389] ACPI Warning: Incorrect checksum in table [OEMB] - BE, should be BD (20090903/tbutils-314)
[ 0.360494] ACPI: No dock devices found.
[ 0.360621] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.360698] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.360700] pci 0000:00:01.0: PME# disabled
[ 0.360759] pci 0000:00:1a.0: reg 20 io port: [0x8800-0x881f]
[ 0.360816] pci 0000:00:1a.1: reg 20 io port: [0x8480-0x849f]
[ 0.360874] pci 0000:00:1a.2: reg 20 io port: [0x8400-0x841f]
[ 0.360934] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff400-0xf7fff7ff]
[ 0.360981] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.360984] pci 0000:00:1a.7: PME# disabled
[ 0.361018] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff]
[ 0.361052] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.361056] pci 0000:00:1b.0: PME# disabled
[ 0.361106] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.361109] pci 0000:00:1c.0: PME# disabled
[ 0.361162] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.361165] pci 0000:00:1c.1: PME# disabled
[ 0.361219] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.361222] pci 0000:00:1c.5: PME# disabled
[ 0.361267] pci 0000:00:1d.0: reg 20 io port: [0x9000-0x901f]
[ 0.361325] pci 0000:00:1d.1: reg 20 io port: [0x8c00-0x8c1f]
[ 0.361382] pci 0000:00:1d.2: reg 20 io port: [0x8880-0x889f]
[ 0.361443] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7fff800-0xf7fffbff]
[ 0.361489] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.361493] pci 0000:00:1d.7: PME# disabled
[ 0.361636] pci 0000:00:1f.2: reg 10 io port: [0xac00-0xac07]
[ 0.361641] pci 0000:00:1f.2: reg 14 io port: [0xa880-0xa883]
[ 0.361646] pci 0000:00:1f.2: reg 18 io port: [0xa800-0xa807]
[ 0.361651] pci 0000:00:1f.2: reg 1c io port: [0xa480-0xa483]
[ 0.361655] pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa40f]
[ 0.361660] pci 0000:00:1f.2: reg 24 io port: [0xa080-0xa08f]
[ 0.361698] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7fffc00-0xf7fffcff]
[ 0.361710] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.361745] pci 0000:00:1f.5: reg 10 io port: [0x9c00-0x9c07]
[ 0.361750] pci 0000:00:1f.5: reg 14 io port: [0x9880-0x9883]
[ 0.361755] pci 0000:00:1f.5: reg 18 io port: [0x9800-0x9807]
[ 0.361760] pci 0000:00:1f.5: reg 1c io port: [0x9480-0x9483]
[ 0.361765] pci 0000:00:1f.5: reg 20 io port: [0x9400-0x940f]
[ 0.361770] pci 0000:00:1f.5: reg 24 io port: [0x9080-0x908f]
[ 0.361815] pci 0000:05:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.361822] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.361830] pci 0000:05:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[ 0.361834] pci 0000:05:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.361839] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.361925] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.361928] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfebfffff]
[ 0.361932] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.362013] pci 0000:02:00.0: reg 24 32bit mmio: [0xf9efe000-0xf9efffff]
[ 0.362048] pci 0000:02:00.0: PME# supported from D3hot
[ 0.362052] pci 0000:02:00.0: PME# disabled
[ 0.362100] pci 0000:02:00.1: reg 10 io port: [0xcc00-0xcc07]
[ 0.362108] pci 0000:02:00.1: reg 14 io port: [0xc880-0xc883]
[ 0.362117] pci 0000:02:00.1: reg 18 io port: [0xc800-0xc807]
[ 0.362125] pci 0000:02:00.1: reg 1c io port: [0xc480-0xc483]
[ 0.362133] pci 0000:02:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.362196] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.362257] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
[ 0.362260] pci 0000:00:1c.0: bridge 32bit mmio: [0xf9e00000-0xf9efffff]
[ 0.362339] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.362357] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xcffff000-0xcfffffff]
[ 0.362370] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xcffe0000-0xcffeffff]
[ 0.362377] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xf9ff0000-0xf9ffffff]
[ 0.362412] pci 0000:04:00.0: supports D1 D2
[ 0.362414] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.362418] pci 0000:04:00.0: PME# disabled
[ 0.368096] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[ 0.368099] pci 0000:00:1c.5: bridge 32bit mmio: [0xf9f00000-0xf9ffffff]
[ 0.368104] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.368138] pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
[ 0.368221] pci 0000:01:02.0: reg 10 32bit mmio: [0xf9dff000-0xf9dfffff]
[ 0.368227] pci 0000:01:02.0: reg 14 io port: [0xbc00-0xbc3f]
[ 0.368233] pci 0000:01:02.0: reg 18 32bit mmio: [0xf9c00000-0xf9cfffff]
[ 0.368251] pci 0000:01:02.0: reg 30 32bit mmio pref: [0xf9b00000-0xf9bfffff]
[ 0.368267] pci 0000:01:02.0: supports D1 D2
[ 0.368268] pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.368272] pci 0000:01:02.0: PME# disabled
[ 0.368314] pci 0000:00:1e.0: transparent bridge
[ 0.368318] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[ 0.368321] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8000000-0xf9dfffff]
[ 0.368341] pci_bus 0000:00: on NUMA node 0
[ 0.368345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.368515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.368664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.368730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.368792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.373255] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.373353] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.373446] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.373542] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.373638] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.373736] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.373832] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.373927] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.374016] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.374021] vgaarb: loaded
[ 0.374033] PCI: Using ACPI for IRQ routing
[ 0.374033] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.374033] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.374033] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.384025] Switching to clocksource tsc
[ 0.385142] pnp: PnP ACPI init
[ 0.385158] ACPI: bus type pnp registered
[ 0.388089] pnp: PnP ACPI: found 17 devices
[ 0.388091] ACPI: ACPI bus type pnp unregistered
[ 0.388094] PnPBIOS: Disabled by ACPI PNP
[ 0.388104] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.388106] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.388113] system 00:07: ioport range 0x4c0-0x4ff has been reserved
[ 0.388116] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.388118] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.388120] system 00:07: ioport range 0x480-0x4bf has been reserved
[ 0.388123] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.388126] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.388128] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.388133] system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.388138] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.388141] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.388145] system 00:0e: ioport range 0xa00-0xadf has been reserved
[ 0.388148] system 00:0e: ioport range 0xae0-0xaef has been reserved
[ 0.388152] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.388157] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[ 0.388160] system 00:10: iomem range 0xc0000-0xcffff could not be reserved
[ 0.388162] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[ 0.388165] system 00:10: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.388167] system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.422987] pci 0000:00:01.0: PCI bridge, secondary bus 0000:05
[ 0.422990] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.422994] pci 0000:00:01.0: MEM window: 0xfa000000-0xfebfffff
[ 0.422997] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.423001] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.423004] pci 0000:00:1c.0: IO window: 0xc000-0xcfff
[ 0.423008] pci 0000:00:1c.0: MEM window: 0xf9e00000-0xf9efffff
[ 0.423011] pci 0000:00:1c.0: PREFETCH window: 0x00000080000000-0x000000801fffff
[ 0.423016] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.423019] pci 0000:00:1c.1: IO window: 0x1000-0x1fff
[ 0.423024] pci 0000:00:1c.1: MEM window: 0x80200000-0x803fffff
[ 0.423027] pci 0000:00:1c.1: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.423032] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[ 0.423035] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 0.423039] pci 0000:00:1c.5: MEM window: 0xf9f00000-0xf9ffffff
[ 0.423043] pci 0000:00:1c.5: PREFETCH window: 0x000000cff00000-0x000000cfffffff
[ 0.423048] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.423051] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.423055] pci 0000:00:1e.0: MEM window: 0xf8000000-0xf9dfffff
[ 0.423059] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.423071] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.423074] pci 0000:00:01.0: setting latency timer to 64
[ 0.423082] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.423085] pci 0000:00:1c.0: setting latency timer to 64
[ 0.423092] pci 0000:00:1c.1: enabling device (0104 -> 0107)
[ 0.423095] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.423098] pci 0000:00:1c.1: setting latency timer to 64
[ 0.423105] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.423109] pci 0000:00:1c.5: setting latency timer to 64
[ 0.423114] pci 0000:00:1e.0: setting latency timer to 64
[ 0.423118] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.423120] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.423122] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.423125] pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfebfffff]
[ 0.423127] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.423129] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.423131] pci_bus 0000:02: resource 1 mem: [0xf9e00000-0xf9efffff]
[ 0.423134] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[ 0.423136] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 0.423138] pci_bus 0000:03: resource 1 mem: [0x80200000-0x803fffff]
[ 0.423140] pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.423143] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.423145] pci_bus 0000:04: resource 1 mem: [0xf9f00000-0xf9ffffff]
[ 0.423147] pci_bus 0000:04: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.423149] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.423151] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xf9dfffff]
[ 0.423154] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.423156] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.423182] NET: Registered protocol family 2
[ 0.423256] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.423472] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.423759] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.423926] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.423928] TCP reno registered
[ 0.423987] NET: Registered protocol family 1
[ 0.424112] pci 0000:05:00.0: Boot video device
[ 0.424124] pci 0000:01:02.0: Firmware left e100 interrupts enabled; disabling
[ 0.424169] Unpacking initramfs...
[ 0.628665] Freeing initrd memory: 8403k freed
[ 0.631817] audit: initializing netlink socket (disabled)
[ 0.631828] type=2000 audit(1321121155.631:1): initialized
[ 0.634815] highmem bounce pool size: 64 pages
[ 0.634819] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.636234] VFS: Disk quotas dquot_6.5.2
[ 0.636276] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.636335] msgmni has been set to 1723
[ 0.636667] alg: No test for stdrng (krng)
[ 0.636717] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.636720] io scheduler noop registered
[ 0.636721] io scheduler anticipatory registered
[ 0.636723] io scheduler deadline registered
[ 0.636751] io scheduler cfq registered (default)
[ 0.636847] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.636852] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.636931] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.636937] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.637029] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.637035] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.637128] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.637135] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.637271] isapnp: Scanning for PnP cards...
[ 0.990079] isapnp: No Plug & Play device found
[ 0.991157] Linux agpgart interface v0.103
[ 0.991266] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.991350] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.991603] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.991826] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.994143] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.994147] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.994188] mice: PS/2 mouse device common for all mice
[ 0.994233] rtc_cmos 00:03: RTC can wake from S4
[ 0.994258] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.994278] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.994290] cpuidle: using governor ladder
[ 0.994291] cpuidle: using governor menu
[ 0.994295] No iBFT detected.
[ 0.994553] TCP cubic registered
[ 0.994665] NET: Registered protocol family 10
[ 0.995250] Mobile IPv6
[ 0.995252] NET: Registered protocol family 17
[ 0.995262] Using IPI No-Shortcut mode
[ 0.995311] PM: Resume from disk failed.
[ 0.995319] registered taskstats version 1
[ 0.995720] rtc_cmos 00:03: setting system clock to 2011-11-12 18:05:56 UTC (1321121156)
[ 0.995760] Initalizing network drop monitor service
[ 0.995797] Freeing unused kernel memory: 380k freed
[ 0.995966] Write protecting the kernel text: 2508k
[ 0.995995] Write protecting the kernel read-only data: 920k
[ 1.001632] <30>udevd[77]: starting version 172
[ 1.011999] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.044190] usbcore: registered new interface driver usbfs
[ 1.044211] usbcore: registered new interface driver hub
[ 1.047709] usbcore: registered new device driver usb
[ 1.062941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.062979] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.062997] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.063000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.063024] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.063058] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.066958] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.066995] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff400
[ 1.067238] SCSI subsystem initialized
[ 1.080464] libata version 3.00 loaded.
[ 1.081022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.081046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.081048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.081051] usb usb1: Product: EHCI Host Controller
[ 1.081053] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.081054] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.081122] usb usb1: configuration #1 chosen from 1 choice
[ 1.081149] hub 1-0:1.0: USB hub found
[ 1.081155] hub 1-0:1.0: 6 ports detected
[ 1.081216] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.081233] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.081236] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.081243] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.081270] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.081403] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 1.081412] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.081439] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 1.081496] scsi0 : pata_jmicron
[ 1.081581] scsi1 : pata_jmicron
[ 1.082060] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
[ 1.082063] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
[ 1.084314] ahci 0000:02:00.0: version 3.0
[ 1.084328] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.085152] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.085186] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800
[ 1.089373] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.089390] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.089426] r8169 0000:04:00.0: setting latency timer to 64
[ 1.089474] r8169 0000:04:00.0: irq 28 for MSI/MSI-X
[ 1.089962] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf7ea8000, 00:21:85:1a:c6:72, XID 1c4000c0 IRQ 28
[ 1.090751] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.100538] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.100542] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.100548] ahci 0000:02:00.0: setting latency timer to 64
[ 1.100696] scsi2 : ahci
[ 1.100777] scsi3 : ahci
[ 1.100855] ata3: SATA max UDMA/133 abar m8192@0xf9efe000 port 0xf9efe100 irq 16
[ 1.100858] ata4: SATA max UDMA/133 abar m8192@0xf9efe000 port 0xf9efe180 irq 16
[ 1.101010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.101036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.101038] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.101041] usb usb2: Product: EHCI Host Controller
[ 1.101043] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.101045] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.101115] usb usb2: configuration #1 chosen from 1 choice
[ 1.101139] hub 2-0:1.0: USB hub found
[ 1.101145] hub 2-0:1.0: 6 ports detected
[ 1.101198] ata_piix 0000:00:1f.2: version 2.13
[ 1.101212] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.101215] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.101249] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.101298] scsi4 : ata_piix
[ 1.101367] scsi5 : ata_piix
[ 1.102434] ata5: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
[ 1.102439] ata6: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
[ 1.102505] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.102514] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.102518] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.102525] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.102554] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008800
[ 1.102579] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.102581] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.102583] usb usb3: Product: UHCI Host Controller
[ 1.102585] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.102587] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.102638] usb usb3: configuration #1 chosen from 1 choice
[ 1.102661] hub 3-0:1.0: USB hub found
[ 1.102666] hub 3-0:1.0: 2 ports detected
[ 1.102727] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.102731] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.102759] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.102810] scsi6 : ata_piix
[ 1.102880] scsi7 : ata_piix
[ 1.103811] ata7: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
[ 1.103815] ata8: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
[ 1.103892] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.103898] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.103901] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.103909] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.103942] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008480
[ 1.103966] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.103968] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.103970] usb usb4: Product: UHCI Host Controller
[ 1.103972] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.103973] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.104033] usb usb4: configuration #1 chosen from 1 choice
[ 1.104055] hub 4-0:1.0: USB hub found
[ 1.104060] hub 4-0:1.0: 2 ports detected
[ 1.104095] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.104099] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.104102] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.104107] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.104127] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00008400
[ 1.104153] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.104155] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.104157] usb usb5: Product: UHCI Host Controller
[ 1.104159] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.104161] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.104208] usb usb5: configuration #1 chosen from 1 choice
[ 1.104229] hub 5-0:1.0: USB hub found
[ 1.104234] hub 5-0:1.0: 2 ports detected
[ 1.104270] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.104275] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.104277] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.104283] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.104302] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009000
[ 1.104325] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.104327] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.104329] usb usb6: Product: UHCI Host Controller
[ 1.104331] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.104333] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.104380] usb usb6: configuration #1 chosen from 1 choice
[ 1.104402] hub 6-0:1.0: USB hub found
[ 1.104408] hub 6-0:1.0: 2 ports detected
[ 1.104448] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.104457] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.104460] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.104465] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.104485] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008c00
[ 1.104510] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.104512] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.104514] usb usb7: Product: UHCI Host Controller
[ 1.104516] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.104518] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.104565] usb usb7: configuration #1 chosen from 1 choice
[ 1.104586] hub 7-0:1.0: USB hub found
[ 1.104591] hub 7-0:1.0: 2 ports detected
[ 1.104625] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.104630] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.104632] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.104638] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.104658] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008880
[ 1.104682] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.104684] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.104686] usb usb8: Product: UHCI Host Controller
[ 1.104688] usb usb8: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.104690] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.104737] usb usb8: configuration #1 chosen from 1 choice
[ 1.104759] hub 8-0:1.0: USB hub found
[ 1.104764] hub 8-0:1.0: 2 ports detected
[ 1.420035] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.420039] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.420808] ata1.00: ATA-6: ST380011A, 8.01, max UDMA/100
[ 1.420811] ata1.00: 156301488 sectors, multi 16: LBA48
[ 1.430705] ata1.01: ATA-5: QUANTUM FIREBALLP LM15, A35.0700, max UDMA/66
[ 1.430708] ata1.01: 29336832 sectors, multi 16: LBA
[ 1.430712] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.441250] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.445749] ata1.00: configured for UDMA/100
[ 1.460862] ata1.01: configured for UDMA/66
[ 1.460970] scsi 0:0:0:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5
[ 1.461115] scsi 0:0:1:0: Direct-Access ATA QUANTUM FIREBALL A35. PQ: 0 ANSI: 5
[ 1.688008] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 1.750583] ata6.00: SATA link down (SStatus 0 SControl 300)
[ 1.750594] ata6.01: SATA link down (SStatus 0 SControl 300)
[ 1.896057] ata5.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.896069] ata5.01: SATA link down (SStatus 0 SControl 300)
[ 1.896079] ata5.01: link offline, clearing class 3 to NONE
[ 1.904186] ata5.00: ATAPI: PIONEER DVD-RW DVR-218L, 1.02, max UDMA/100
[ 1.920204] ata5.00: configured for UDMA/100
[ 1.925069] scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-218L 1.02 PQ: 0 ANSI: 5
[ 1.927374] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.927376] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.927408] e100 0000:01:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.932603] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.932645] sd 0:0:0:0: [sda] Write Protect is off
[ 1.932648] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.932671] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.932688] sd 0:0:1:0: [sdb] 29336832 512-byte logical blocks: (15.0 GB/13.9 GiB)
[ 1.932740] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.932743] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.932770] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.932802] sda: sda1 sda2 <
[ 1.951263] e100 0000:01:02.0: PME# disabled
[ 1.951775] e100: eth1: e100_probe: addr 0xf9dff000, irq 21, MAC addr 00:d0:b7:85:0a:3f
[ 1.952222] sda5 sda6 sda7
[ 1.981214] sdb: sda8 sdb1
[ 1.989806] sda9
[ 1.994021] usb 4-2: New USB device found, idVendor=051d, idProduct=0002
[ 1.994024] usb 4-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.994027] usb 4-2: Product: Back-UPS RS 1500 FW:8.g8 .D USB FW:g8
[ 1.994030] usb 4-2: Manufacturer: American Power Conversion
[ 1.994032] usb 4-2: SerialNumber: QB0512132444
[ 1.994100] usb 4-2: configuration #1 chosen from 1 choice
[ 2.003031] sda10 sda11 sda12 >
[ 2.019479] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 2.019849] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.022712] usbcore: registered new interface driver hiddev
[ 2.027013] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.027044] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 2.027070] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 2.036739] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.036743] Uniform CD-ROM driver Revision: 3.20
[ 2.036836] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.240014] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 2.380404] usb 6-1: not running at top speed; connect to a high speed hub
[ 2.408404] usb 6-1: New USB device found, idVendor=058f, idProduct=6366
[ 2.408407] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.408410] usb 6-1: Product: Mass Storage Device
[ 2.408412] usb 6-1: Manufacturer: Generic
[ 2.408414] usb 6-1: SerialNumber: 058F0O1111B1
[ 2.408492] usb 6-1: configuration #1 chosen from 1 choice
[ 2.416765] Initializing USB Mass Storage driver...
[ 2.416898] scsi8 : SCSI emulation for USB Mass Storage devices
[ 2.416984] usb-storage: device found at 2
[ 2.416992] usb-storage: waiting for device to settle before scanning
[ 2.417004] usbcore: registered new interface driver usb-storage
[ 2.417007] USB Mass Storage support registered.
[ 3.091188] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g8 .D USB FW:g8 ] on usb-0000:00:1a.1-2/input0
[ 3.091213] usbcore: registered new interface driver usbhid
[ 3.091215] usbhid: v2.6:USB HID core driver
[ 3.451584] PM: Starting manual resume from disk
[ 3.451587] PM: Resume from partition 8:10
[ 3.451588] PM: Checking hibernation image.
[ 3.469026] PM: Error -22 checking image file
[ 3.469028] PM: Resume from disk failed.
[ 3.500364] kjournald starting. Commit interval 5 seconds
[ 3.500368] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.327955] <30>udevd[403]: starting version 172
[ 6.096768] ACPI: SSDT 7ff9e0c0 001F3 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 6.097029] processor LNXCPU:00: registered as cooling_device0
[ 6.097362] ACPI: SSDT 7ff9e2c0 001F3 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 6.097428] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 6.097435] ACPI: Power Button [PWRB]
[ 6.097663] processor LNXCPU:01: registered as cooling_device1
[ 6.097707] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.097710] ACPI: Power Button [PWRF]
[ 6.097812] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.098212] ACPI: SSDT 7ff9e4c0 001F3 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
[ 6.098440] processor LNXCPU:02: registered as cooling_device2
[ 6.098803] ACPI: SSDT 7ff9e6c0 001F3 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
[ 6.099020] processor LNXCPU:03: registered as cooling_device3
[ 6.642114] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 7.417713] usb-storage: device scan complete
[ 7.420716] scsi 8:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 7.421310] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 7.430691] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 7.465506] nvidia: module license 'NVIDIA' taints kernel.
[ 7.465514] Disabling lock debugging due to kernel taint
[ 7.797701] nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.797709] nvidia 0000:05:00.0: setting latency timer to 64
[ 7.797713] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.797905] NVRM: loading NVIDIA UNIX x86 Kernel Module 290.03 Mon Oct 17 12:31:16 PDT 2011
[ 7.799243] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.992918] Linux video capture interface: v2.00
[ 8.096664] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[ 8.096696] cx8800 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.097099] cx88[0]: subsystem: 1043:4820, board: ASUS PVR-416 [card=12,insmod option], frontend(s): 0
[ 8.097102] cx88[0]: TV tuner type 43, Radio tuner type -1
[ 9.028229] All bytes are equal. It is not a TEA5767
[ 9.028281] tuner 1-0060: chip found @ 0xc0 (cx88[0])
[ 9.155637] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.155670] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.157312] tuner-simple 1-0060: creating new instance
[ 9.157315] tuner-simple 1-0060: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
[ 9.158115] cx88[0]/0: found at 0000:01:00.0, rev: 3, irq: 16, latency: 64, mmio: 0xf8000000
[ 9.158123] IRQ 16/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 9.158178] cx88[0]/0: registered device video0 [v4l2]
[ 9.158198] cx88[0]/0: registered device vbi0
[ 9.158224] cx88[0]/0: registered device radio0
[ 9.256498] hda_codec: ALC888: BIOS auto-probing.
[ 9.257878] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 9.755963] Adding 2361512k swap on /dev/sda10. Priority:-1 extents:1 across:2361512k
[ 10.595602] EXT3 FS on sda1, internal journal
[ 10.655091] loop: module loaded
[ 10.719360] fuse init (API version 7.13)
[ 10.798024] f71882fg: Found f71882fg chip at 0xa00, revision 32
[ 10.798441] f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
[ 10.798444] f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
[ 10.798446] f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode
[ 10.798447] f71882fg f71882fg.2560: Fan: 4 is in duty-cycle mode
[ 15.487286] kjournald starting. Commit interval 5 seconds
[ 15.487511] EXT3 FS on sda5, internal journal
[ 15.487516] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.557978] kjournald starting. Commit interval 5 seconds
[ 15.558211] EXT3 FS on sda6, internal journal
[ 15.558215] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.655102] kjournald starting. Commit interval 5 seconds
[ 15.655330] EXT3 FS on sda7, internal journal
[ 15.655335] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.745700] kjournald starting. Commit interval 5 seconds
[ 15.745998] EXT3 FS on sda8, internal journal
[ 15.746002] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.828057] kjournald starting. Commit interval 5 seconds
[ 15.828323] EXT3 FS on sda9, internal journal
[ 15.828327] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.911472] kjournald starting. Commit interval 5 seconds
[ 15.911735] EXT3 FS on sda11, internal journal
[ 15.911739] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.974495] kjournald starting. Commit interval 5 seconds
[ 15.974760] EXT3 FS on sda12, internal journal
[ 15.974764] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.059636] kjournald starting. Commit interval 5 seconds
[ 16.059907] EXT3 FS on sdb1, internal journal
[ 16.059910] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.313373] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.362463] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 17.362637] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 17.362639] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 17.362641] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 18.605808] r8169 0000:04:00.0: eth0: link down
[ 18.605814] r8169 0000:04:00.0: eth0: link down
[ 18.605991] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.282299] r8169 0000:04:00.0: eth0: link up
[ 20.282487] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.604007] eth0: no IPv6 routers present
[ 34.978711] vboxdrv: Found 4 processor cores.
[ 34.979023] vboxdrv: fAsync=0 offMin=0x3fe offMax=0x124b
[ 34.979076] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 34.979078] vboxdrv: Successfully loaded version 4.1.6 (interface 0x00190000).
[ 35.526247] vboxpci: IOMMU not found (not compiled)

The computer's specifications are: Intel Core 2 Q8200 (quad-core; default clock speeds; Socket 775 LGA) with a Scythe Andy Master 120mm CPU cooler (SCASM-1000), Enlight 7237-ATX mid-tower case; two case 80mm case fans, MSI P43 NEO3-F (MSI-7514) motherboard (latest BIOS), two 1 GB of Crucial RAM (Samsung DDR2 800 (PC2-6400; 400 MHz), onboard RealTek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC network and RealTek audio, 600 watts SeaSonic S12 PSU, ASUS TV Tuner Card 880 NTSC (cx23880), Pioneer CD/DVD Burner Black SATA Model DVR-218LBK LabelFlash Support, 3.5" disk drive, Seagate Barracuda 7200.7 (ST380011A; 7200 RPM; 80 GB) HDD, an IDE Quantum Fireball Plus LM 15 GB, USB+memory card reader front panel, and an Intel InBusiness 10/100 (82559) NIC (not connected). Running Debian (Linux; kernel v2.6.32-...-686).

Any ideas what's up and how to fix it? Thank you in advance.