First off is this the right area for this discussion? Second I was able to get the Black Magic Intensity Pro working after building from source via the new build script in Ubuntu 10.10. Kdenlive starts up fine with new options for capture from the Intensity Pro Card. I plugged in HDMI and set both the project to right frame rate and resolution same with the other output and was able to hit preview and can see the screen I wanted to capture. All good there now when I hit the capture or record button it does nothing. Again I can see the video previewing fine. Also I can capture and play back fine in the Media Express app just fine. Playback in kdenlive for 8bit YUV files are choppy. No problem with my video cards or hard drives. No choppy playback in media express or totem movie player so it is kdenlive. Just so all are aware one SSD Drive has enough speed to run your OS and capture/playback HD video from the Intensity Pro at 8 bit YUV or the lower jpeg quality settings. That is on a Corsair 120GB drive it averages min. 250MB/s average 265MB/s Max 290MB/s. Just a FYI and if you need more testing done let me know. Great work at incorporating this card! Does anybody know if capture actually works with Intensity Pro in source build? If so am I doing anything wrong?

Kdenlive 0.7.9 rev. 5525
AMD Phenom II X4 925 Deneb 2.8GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 95W Quad-Core
GIGABYTE GV-R465OC-1GI Radeon HD 4650 1GB 128-bit GDDR2 PCI Express 2.0 x16 HDCP Ready Video
Black Magic Intensity Pro
Corsair SSD 120GB
4GB Ram

I noticed something else I had created a folder for kdenlive in home and built kdenlive there. I noticed the captures that where happening where in that folder in capture_video_01.raw for example. Same with audio cature_audio_01.raw. It did not state it was recording at all in the program. What is kdenlive capturing here? As I have stated earlier preview works fine capture is weird? I took a look at the BlackMagic API just to see how you where integrating into kdenlive let me know if you have finished the integration into kdenlive and I will test. Who is heading up this side of devel and how can I help?

development level discussion goes to the mailing list. JBM has been doing the work on capture within Kdenlive. I have been working on the Blackmagic output within MLT.