Hi there. Im using a acer netbook Aspire ES1-111M with Kubuntu 14.10 64bits and Plasma 5.1.1
I have a problem and i am unable to log in after computer goes to sleep.. the computer wakes and goes for login screen but the mouse or trackpad doesnt work although i can write my password very slow.. yup dont know why but i write and it take a few seconds to appear the ••••• in password field. And then when i press enter to log in it gaves me error.. cant remember exactly the error but im 100% positive password is rigth. I try again and again and all i can do is turn off netbook and on again..
I have a litle shot i took to see if this helps i pressed ALT+CTRL+F1 (i think its this).



Thanks.

That suggests I/O errors with a MMC (usually a SD card) - could be just an SD card (which you may soon kiss goodbye) or the controller has issues with re/initialization.
If you've some random SD card in a slot (which you don't actually need), try to remove it and see what happens.
If you somehow boot from this device, I'd rather check dmesg for mmc errors w/o STR invoked.
If there are, I'd save my data ASAP!

I just use netbook for browsing web no files i need to backup. This is SSD 32GB the storage that was my SO. Its the only disk in my netbook.
Dsmeg is huuuge..

Code: Select all

g
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-25-generic (buildd@komainu) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #33-Ubuntu SMP Tue Nov 4 12:06:54 UTC 2014 (Ubuntu 3.16.0-25.33-generic 3.16.7)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic root=UUID=53011221-9dfe-408e-9695-e1e901ea6156 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000781aefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000781af000-0x00000000787aefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000787af000-0x00000000788aefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000788af000-0x00000000788eefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000788ef000-0x00000000794c5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000794c6000-0x0000000079dc5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000079dc6000-0x0000000079ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007a7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Aspire ES1-111M/R2, BIOS V1.03 07/22/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 07C000000 mask FFC000000 uncachable
[    0.000000]   3 base 07B000000 mask FFF000000 uncachable
[    0.000000]   4 base 07AE00000 mask FFFE00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x79e00000-0x79ffffff]
[    0.000000]  [mem 0x79e00000-0x79ffffff] page 2M
[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x78000000-0x781aefff]
[    0.000000]  [mem 0x78000000-0x781aefff] page 4k
[    0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x788ef000-0x794c5fff]
[    0.000000]  [mem 0x788ef000-0x789fffff] page 4k
[    0.000000]  [mem 0x78a00000-0x793fffff] page 2M
[    0.000000]  [mem 0x79400000-0x794c5fff] page 4k
[    0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x79dc6000-0x79dfffff]
[    0.000000]  [mem 0x79dc6000-0x79dfffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1effffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1effffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x1f100000-0x1fffffff]
[    0.000000]  [mem 0x1f100000-0x1f1fffff] page 4k
[    0.000000]  [mem 0x1f200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff]
[    0.000000]  [mem 0x20100000-0x201fffff] page 4k
[    0.000000]  [mem 0x20200000-0x77ffffff] page 2M
[    0.000000] RAMDISK: [mem 0x348a0000-0x36447fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x00000000788EE120 0000AC (v01 ACRSYS ACRPRDCT 00000003      01000013)
[    0.000000] ACPI: FACP 0x00000000788EB000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: DSDT 0x00000000788DD000 008EEF (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: FACS 0x0000000078878000 000040
[    0.000000] ACPI: UEFI 0x00000000788ED000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MSDM 0x00000000788EC000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 0x00000000788EA000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: LPIT 0x00000000788E9000 000104 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: APIC 0x00000000788E8000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: MCFG 0x00000000788E7000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000788E6000 000581 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000788DB000 00138A (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000788DA000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000788D9000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000788D8000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: UEFI 0x00000000788D7000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000788D3000 00305B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: CSRT 0x00000000788D2000 00014C (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000788D1000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: FPDT 0x00000000788D0000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x79ffffff]
[    0.000000]   NODE_DATA [mem 0x79ff7000-0x79ffbfff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076000000-ffff880077ffffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1effffff]
[    0.000000]   node   0: [mem 0x1f100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20100000-0x781aefff]
[    0.000000]   node   0: [mem 0x788ef000-0x794c5fff]
[    0.000000]   node   0: [mem 0x79dc6000-0x79ffffff]
[    0.000000] On node 0 totalpages: 494941
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7744 pages used for memmap
[    0.000000]   DMA32 zone: 490944 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 103
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x781af000-0x787aefff]
[    0.000000] PM: Registered nosave memory: [mem 0x787af000-0x788aefff]
[    0.000000] PM: Registered nosave memory: [mem 0x788af000-0x788eefff]
[    0.000000] PM: Registered nosave memory: [mem 0x794c6000-0x79dc5fff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880079200000 s87360 r8192 d23232 u524288
[    0.000000] pcpu-alloc: s87360 r8192 d23232 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 487112
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-25-generic root=UUID=53011221-9dfe-408e-9695-e1e901ea6156 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1901612K/1979764K available (7732K kernel code, 1200K rwdata, 3608K rodata, 1360K init, 1308K bss, 78152K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-3.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:1024 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 8388608 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Maximum core-clock to bus-clock ratio: 0x1a
[    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[    0.000000] TSC runs at 2163200 KHz
[    0.000000] lapic_timer_frequency = 332800
[    0.000000] tsc: Detected 2163.200 MHz processor
[    0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4326.40 BogoMIPS (lpj=8652800)
[    0.000044] pid_max: default: 32768 minimum: 301
[    0.000062] ACPI: Core revision 20140424
[    0.020334] ACPI: All ACPI Tables successfully acquired
[    0.036881] Security Framework initialized
[    0.036909] AppArmor: AppArmor initialized
[    0.036912] Yama: becoming mindful.
[    0.037187] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.038076] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.038489] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.038498] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.038864] Initializing cgroup subsys memory
[    0.038914] Initializing cgroup subsys devices
[    0.038927] Initializing cgroup subsys freezer
[    0.038934] Initializing cgroup subsys net_cls
[    0.038942] Initializing cgroup subsys blkio
[    0.038951] Initializing cgroup subsys perf_event
[    0.038956] Initializing cgroup subsys net_prio
[    0.038970] Initializing cgroup subsys hugetlb
[    0.039001] CPU: Physical Processor ID: 0
[    0.039004] CPU: Processor Core ID: 0
[    0.039009] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.043777] mce: CPU supports 6 MCE banks
[    0.043786] CPU0: Thermal monitoring handled by SMI
[    0.043795] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
tlb_flushall_shift: 6
[    0.043933] Freeing SMP alternatives memory: 32K (ffffffff81e82000 - ffffffff81e8a000)
[    0.045141] ftrace: allocating 29293 entries in 115 pages
[    0.061136] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100793] smpboot: CPU0: Intel(R) Celeron(R) CPU  N2840  @ 2.16GHz (fam: 06, model: 37, stepping: 08)
[    0.100820] TSC deadline timer enabled
[    0.100857] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[    0.100872] ... version:                3
[    0.100874] ... bit width:              40
[    0.100876] ... generic registers:      2
[    0.100878] ... value mask:             000000ffffffffff
[    0.100880] ... max period:             000000ffffffffff
[    0.100882] ... fixed-purpose events:   3
[    0.100884] ... event mask:             0000000700000003
[    0.103981] x86: Booting SMP configuration:
[    0.103987] .... node  #0, CPUs:      #1
[    0.119663] CPU1: Thermal monitoring handled by SMI
[    0.121732] x86: Booted up 1 node, 2 CPUs
[    0.121739] smpboot: Total of 2 processors activated (8652.80 BogoMIPS)
[    0.121870] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.122447] devtmpfs: initialized
[    0.128508] evm: security.selinux
[    0.128511] evm: security.SMACK64
[    0.128513] evm: security.SMACK64EXEC
[    0.128515] evm: security.SMACK64TRANSMUTE
[    0.128517] evm: security.SMACK64MMAP
[    0.128519] evm: security.ima
[    0.128521] evm: security.capability
[    0.128626] PM: Registering ACPI NVS region [mem 0x787af000-0x788aefff] (1048576 bytes)
[    0.128660] PM: Registering ACPI NVS region [mem 0x794c6000-0x79dc5fff] (9437184 bytes)
[    0.130698] pinctrl core: initialized pinctrl subsystem
[    0.130864] regulator-dummy: no parameters
[    0.130908] RTC time: 14:56:21, date: 12/14/14
[    0.131002] NET: Registered protocol family 16
[    0.131302] cpuidle: using governor ladder
[    0.131307] cpuidle: using governor menu
[    0.131417] ACPI: bus type PCI registered
[    0.131421] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.131556] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.131561] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.131743] PCI: Using configuration type 1 for base access
[    0.138558] ACPI: Added _OSI(Module Device)
[    0.138563] ACPI: Added _OSI(Processor Device)
[    0.138565] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.138568] ACPI: Added _OSI(Processor Aggregator Device)
[    0.158704] ACPI: Dynamic OEM Table Load:
[    0.158720] ACPI: SSDT 0xFFFF88007567E800 000440 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.159709] ACPI: Dynamic OEM Table Load:
[    0.159721] ACPI: SSDT 0xFFFF88007567F000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.162160] ACPI: Dynamic OEM Table Load:
[    0.162172] ACPI: SSDT 0xFFFF8800752E0400 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.165865] ACPI: Dynamic OEM Table Load:
[    0.165876] ACPI: SSDT 0xFFFF8800751056C0 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.173814] ACPI: Interpreter enabled
[    0.173826] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.173835] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.173862] ACPI: (supports S0 S3 S4 S5)
[    0.173865] ACPI: Using IOAPIC for interrupt routing
[    0.173921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.177570] ACPI: Power Resource [USBC] (on)
[    0.188664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.188675] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.188864] \_SB_.PCI0:_OSC invalid UUID
[    0.188867] _OSC request data:1 1f 0
[    0.188874] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.189304] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.189600] PCI host bridge to bus 0000:00
[    0.189606] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.189610] pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
[    0.189614] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
[    0.189617] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.189621] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.189625] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.189628] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[    0.189632] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe]
[    0.189643] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.189810] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.189826] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    0.189839] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.189851] pci 0000:00:02.0: reg 0x20: [io  0x2050-0x2057]
[    0.190013] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501
[    0.190033] pci 0000:00:12.0: reg 0x10: [mem 0x90920000-0x90920fff]
[    0.190045] pci 0000:00:12.0: reg 0x14: [mem 0x9091f000-0x9091ffff]
[    0.190112] pci 0000:00:12.0: PME# supported from D0 D3hot
[    0.190245] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.190267] pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit]
[    0.190327] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.190418] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.190494] pci 0000:00:17.0: [8086:0f50] type 00 class 0x080501
[    0.190514] pci 0000:00:17.0: reg 0x10: [mem 0x9091d000-0x9091dfff]
[    0.190525] pci 0000:00:17.0: reg 0x14: [mem 0x9091c000-0x9091cfff]
[    0.190592] pci 0000:00:17.0: PME# supported from D0 D3hot
[    0.190730] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.190759] pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff]
[    0.190774] pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff]
[    0.190883] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.191022] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    0.191047] pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit]
[    0.191119] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.191247] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    0.191312] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.191380] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.191450] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[    0.191514] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.191586] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.191660] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[    0.191724] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.191792] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.191870] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.192062] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[    0.192099] pci 0000:00:1f.3: reg 0x10: [mem 0x90918000-0x9091801f]
[    0.192172] pci 0000:00:1f.3: reg 0x20: [io  0x2000-0x201f]
[    0.192455] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.192593] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
[    0.192622] pci 0000:02:00.0: reg 0x10: [mem 0x90600000-0x90607fff 64bit]
[    0.192758] pci 0000:02:00.0: supports D1 D2
[    0.192762] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.192808] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.197783] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.197791] pci 0000:00:1c.1:   bridge window [mem 0x90600000-0x906fffff]
[    0.197901] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.197924] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.197953] pci 0000:03:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit]
[    0.197973] pci 0000:03:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref]
[    0.198064] pci 0000:03:00.0: supports D1 D2
[    0.198068] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.198115] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.205758] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.205764] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.205769] pci 0000:00:1c.2:   bridge window [mem 0x90500000-0x905fffff]
[    0.205776] pci 0000:00:1c.2:   bridge window [mem 0x90400000-0x904fffff 64bit pref]
[    0.206616] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.206739] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.206852] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.206966] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.207084] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.207201] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.207315] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.207428] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.210305] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.210541] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.210755] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.210759] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.210765] vgaarb: loaded
[    0.210768] vgaarb: bridge control possible 0000:00:02.0
[    0.211228] SCSI subsystem initialized
[    0.211309] libata version 3.00 loaded.
[    0.211363] ACPI: bus type USB registered
[    0.211400] usbcore: registered new interface driver usbfs
[    0.211423] usbcore: registered new interface driver hub
[    0.211478] usbcore: registered new device driver usb
[    0.211728] PCI: Using ACPI for IRQ routing
[    0.213126] PCI: pci_cache_line_size set to 64 bytes
[    0.213197] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.213200] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[    0.213203] e820: reserve RAM buffer [mem 0x781af000-0x7bffffff]
[    0.213206] e820: reserve RAM buffer [mem 0x794c6000-0x7bffffff]
[    0.213209] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[    0.213406] NetLabel: Initializing
[    0.213409] NetLabel:  domain hash size = 128
[    0.213411] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.213431] NetLabel:  unlabeled traffic allowed by default
[    0.213596] Switched to clocksource refined-jiffies
[    0.224245] AppArmor: AppArmor Filesystem Enabled
[    0.224306] pnp: PnP ACPI init
[    0.224338] ACPI: bus type PNP registered
[    0.224423] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.224560] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.224565] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.224569] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.224573] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.224579] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.224584] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.224710] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.225226] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.225231] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.225236] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.225240] system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved
[    0.225245] system 00:03: [mem 0xfed0c000-0xfed0ffff] could not be reserved
[    0.225249] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.225253] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.225257] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.225261] system 00:03: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.225266] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.226696] pnp: PnP ACPI: found 4 devices
[    0.226699] ACPI: bus type PNP unregistered
[    0.235057] Switched to clocksource acpi_pm
[    0.235082] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.235088] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.235093] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[    0.235103] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.235108] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.235123] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.235127] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.235132] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.235135] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.235139] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.235150] pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000)
[    0.235160] pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
[    0.235170] pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000)
[    0.235176] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.235181] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    0.235191] pci 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000)
[    0.235197] pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000)
[    0.235206] pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
[    0.235210] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.235215] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.235226] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.235230] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.235236] pci 0000:00:1c.1:   bridge window [mem 0x90600000-0x906fffff]
[    0.235244] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.235248] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.235254] pci 0000:00:1c.2:   bridge window [mem 0x90500000-0x905fffff]
[    0.235259] pci 0000:00:1c.2:   bridge window [mem 0x90400000-0x904fffff 64bit pref]
[    0.235267] pci_bus 0000:00: resource 4 [io  0x0000-0x006f]
[    0.235270] pci_bus 0000:00: resource 5 [io  0x0078-0x0cf7]
[    0.235274] pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
[    0.235277] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    0.235281] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[    0.235284] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[    0.235288] pci_bus 0000:00: resource 10 [mem 0x80000000-0x909ffffe]
[    0.235292] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.235295] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.235299] pci_bus 0000:02: resource 1 [mem 0x90600000-0x906fffff]
[    0.235303] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.235306] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff]
[    0.235310] pci_bus 0000:03: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
[    0.235356] NET: Registered protocol family 2
[    0.235663] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.235735] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.235809] TCP: Hash tables configured (established 16384 bind 16384)
[    0.235854] TCP: reno registered
[    0.235866] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.235886] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.235983] NET: Registered protocol family 1
[    0.236011] pci 0000:00:02.0: Video device with shadowed ROM
[    0.236344] PCI: CLS 64 bytes, default 64
[    0.236478] Trying to unpack rootfs image as initramfs...
[    0.940952] Freeing initrd memory: 28320K (ffff8800348a0000 - ffff880036448000)
[    0.941330] microcode: CPU0 sig=0x30678, pf=0x8, revision=0x824
[    0.941344] microcode: CPU1 sig=0x30678, pf=0x8, revision=0x824
[    0.941453] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.941496] Scanning for low memory corruption every 60 seconds
[    0.942115] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.942145] Initialise system trusted keyring
[    0.942191] audit: initializing netlink subsys (disabled)
[    0.942215] audit: type=2000 audit(1418568980.923:1): initialized
[    0.942711] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.945778] zpool: loaded
[    0.945783] zbud: loaded
[    0.946059] VFS: Disk quotas dquot_6.5.2
[    0.946138] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.947148] fuse init (API version 7.23)
[    0.947330] msgmni has been set to 3769
[    0.947440] Key type big_key registered
[    0.948383] Key type asymmetric registered
[    0.948389] Asymmetric key parser 'x509' registered
[    0.948468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.948574] io scheduler noop registered
[    0.948580] io scheduler deadline registered (default)
[    0.948676] io scheduler cfq registered
[    0.949339] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.949371] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.949476] efifb: probing for efifb
[    0.949483] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
[    0.949486] efifb: mode is 640x480x1, linelength=80, pages=1
[    0.949488] efifb: scrolling: redraw
[    0.949491] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.949648] Console: switching to colour frame buffer device 80x30
[    0.949664] fb0: EFI VGA frame buffer device
[    0.949698] intel_idle: MWAIT substates: 0x33000020
[    0.949701] intel_idle: v0.4 model 0x37
[    0.949704] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.156370] ACPI: AC Adapter [ACAD] (off-line)
[    1.156692] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.156700] ACPI: Power Button [PWRB]
[    1.156775] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.156781] ACPI: Sleep Button [SLPB]
[    1.156870] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.156901] ACPI: Lid Switch [LID]
[    1.156978] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.156983] ACPI: Power Button [PWRF]
[    1.159614] thermal LNXTHERM:00: registered as thermal_zone0
[    1.159618] ACPI: Thermal Zone [TZ01] (34 C)
[    1.159674] GHES: HEST is not enabled!
[    1.159905] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.161206] ACPI: Battery Slot [BAT1] (battery present)
[    1.180063] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.185332] hpet: number irqs doesn't agree with number of timers
[    1.185373] Linux agpgart interface v0.103
[    1.188393] brd: module loaded
[    1.190018] loop: module loaded
[    1.190448] libphy: Fixed MDIO Bus: probed
[    1.190455] tun: Universal TUN/TAP device driver, 1.6
[    1.190457] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.190566] PPP generic driver version 2.4.2
[    1.190671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.190681] ehci-pci: EHCI PCI platform driver
[    1.190705] ehci-platform: EHCI generic platform driver
[    1.190725] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.190733] ohci-pci: OHCI PCI platform driver
[    1.190754] ohci-platform: OHCI generic platform driver
[    1.190772] uhci_hcd: USB Universal Host Controller Interface driver
[    1.190996] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.191008] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.191409] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.191440] xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X
[    1.191549] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.191554] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.191557] usb usb1: Product: xHCI Host Controller
[    1.191561] usb usb1: Manufacturer: Linux 3.16.0-25-generic xhci_hcd
[    1.191564] usb usb1: SerialNumber: 0000:00:14.0
[    1.191802] hub 1-0:1.0: USB hub found
[    1.191820] hub 1-0:1.0: 6 ports detected
[    1.192609] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.192616] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.192690] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.192695] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.192698] usb usb2: Product: xHCI Host Controller
[    1.192701] usb usb2: Manufacturer: Linux 3.16.0-25-generic xhci_hcd
[    1.192704] usb usb2: SerialNumber: 0000:00:14.0
[    1.192931] hub 2-0:1.0: USB hub found
[    1.192945] hub 2-0:1.0: 1 port detected
[    1.193253] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.193257] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.193743] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.193996] mousedev: PS/2 mouse device common for all mice
[    1.194493] rtc_cmos 00:00: RTC can wake from S4
[    1.194670] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.194699] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[    1.194833] device-mapper: uevent: version 1.0.3
[    1.194984] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.195010] Intel P-state driver initializing.
[    1.195030] Intel pstate controlling: cpu 0
[    1.195153] Intel pstate controlling: cpu 1
[    1.195331] Consider also installing thermald for improved thermal control.
[    1.195368] ledtrig-cpu: registered to indicate activity on CPUs
[    1.195534] TCP: cubic registered
[    1.195728] NET: Registered protocol family 10
[    1.196136] NET: Registered protocol family 17
[    1.196160] Key type dns_resolver registered
[    1.196664] Loading compiled-in X.509 certificates
[    1.198220] Loaded X.509 cert 'Magrathea: Glacier signing key: 5784eb6867a4540d81005486b7553828888a60e0'
[    1.198243] registered taskstats version 1
[    1.201840] Key type trusted registered
[    1.205267] Key type encrypted registered
[    1.208698] AppArmor: AppArmor sha1 policy hashing enabled
[    1.208706] ima: No TPM chip found, activating TPM-bypass!
[    1.208740] evm: HMAC attrs: 0x1
[    1.209163]   Magic number: 10:464:940
[    1.209311] rtc_cmos 00:00: setting system clock to 2014-12-14 14:56:22 UTC (1418568982)
[    1.209433] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.209435] EDD information not available.
[    1.209615] PM: Hibernation image not present or could not be loaded.
[    1.211341] Freeing unused kernel memory: 1360K (ffffffff81d2e000 - ffffffff81e82000)
[    1.211347] Write protecting the kernel read-only data: 12288k
[    1.212215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.213407] Freeing unused kernel memory: 448K (ffff880001790000 - ffff880001800000)
[    1.215339] Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
[    1.234527] systemd-udevd[105]: starting version 208
[    1.235511] random: systemd-udevd urandom read with 2 bits of entropy available
[    1.266541] sdhci: Secure Digital Host Controller Interface driver
[    1.266546] sdhci: Copyright(c) Pierre Ossman
[    1.289170] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:0f16] (rev e)
[    1.290336] mmc0: no vqmmc regulator found
[    1.290341] mmc0: no vmmc regulator found
[    1.292344] mmc0: SDHCI controller on PCI [0000:00:12.0] using ADMA
[    1.292376] sdhci-pci 0000:00:17.0: SDHCI controller found [8086:0f50] (rev e)
[    1.292434] wmi: Mapper loaded
[    1.293732] [drm] Initialized drm 1.1.0 20060810
[    1.294675] mmc1: no vqmmc regulator found
[    1.294678] mmc1: no vmmc regulator found
[    1.299319] mmc1: SDHCI controller on PCI [0000:00:17.0] using ADMA
[    1.320004] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.320029] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.326552] [drm] Memory usable by graphics device = 2048M
[    1.326557] [drm] Replacing VGA console driver
[    1.326563] checking generic (a0000 10000) vs hw (80000000 10000000)
[    1.326565] fb: switching to inteldrmfb from EFI VGA
[    1.326596] Console: switching to colour dummy device 80x25
[    1.328410] r8169 0000:03:00.0: irq 104 for MSI/MSI-X
[    1.328677] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90004412000, c4:54:44:c0:83:10, XID 0c000800 IRQ 104
[    1.328681] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.336164] i915 0000:00:02.0: irq 105 for MSI/MSI-X
[    1.336179] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.336182] [drm] Driver supports precise vblank timestamp query.
[    1.505473] mmc1: BKOPS_EN bit is not set
[    1.560385] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.560608] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    1.571815] mmc1: new HS200 MMC card at address 0001
[    1.575137] mmcblk0: mmc1:0001 HBG4e 29.1 GiB
[    1.575211] mmcblk0boot0: mmc1:0001 HBG4e partition 1 4.00 MiB
[    1.575448] mmcblk0boot1: mmc1:0001 HBG4e partition 2 4.00 MiB
[    1.575575] mmcblk0rpmb: mmc1:0001 HBG4e partition 3 4.00 MiB
[    1.576764]  mmcblk0: p1 p2 < p5 >
[    1.585274]  mmcblk0boot1: unknown partition table
[    1.591868]  mmcblk0boot0: unknown partition table
[    1.632943] [drm] VBT doesn't support DRRS
[    1.746015] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[    1.746021] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.746024] usb 1-2: Product: USB2.0 Hub
[    1.746793] hub 1-2:1.0: USB hub found
[    1.747092] hub 1-2:1.0: 4 ports detected
[    1.748071] usb: failed to peer 1-2-port1 and usb2-port1 by location (1-2-port1:none) (usb2-port1:usb1-port1)
[    1.748075] usb 1-2-port1: failed to peer to usb2-port1 (-16)
[    1.748078] usb: port power management may be unreliable
[    1.748178] usb: failed to peer 1-2-port2 and usb2-port1 by location (1-2-port2:none) (usb2-port1:usb1-port1)
[    1.748183] usb 1-2-port2: failed to peer to usb2-port1 (-16)
[    1.748277] usb: failed to peer 1-2-port3 and usb2-port1 by location (1-2-port3:none) (usb2-port1:usb1-port1)
[    1.748313] usb 1-2-port3: failed to peer to usb2-port1 (-16)
[    1.748413] usb: failed to peer 1-2-port4 and usb2-port1 by location (1-2-port4:none) (usb2-port1:usb1-port1)
[    1.748418] usb 1-2-port4: failed to peer to usb2-port1 (-16)
[    1.916691] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    1.940606] tsc: Refined TSC clocksource calibration: 2166.665 MHz
[    2.054067] usb 1-4: New USB device found, idVendor=04f2, idProduct=b469
[    2.054072] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.054076] usb 1-4: Product: HD WebCam
[    2.054079] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.129194] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
[    2.220265] usb 1-2.1: New USB device found, idVendor=0489, idProduct=e055
[    2.220269] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.220273] usb 1-2.1: Product: BCM43142A0
[    2.220276] usb 1-2.1: Manufacturer: Broadcom Corp
[    2.220280] usb 1-2.1: SerialNumber: 3C77E6F5B156
[    2.292902] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[    2.297227] usb 1-2.2: new low-speed USB device number 5 using xhci_hcd
[    2.390127] usb 1-2.2: New USB device found, idVendor=1bcf, idProduct=05ca
[    2.390132] usb 1-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.390135] usb 1-2.2: Product: 2.4GHz 2way RF Receiver
[    2.390578] usb 1-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.390588] usb 1-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.400993] hidraw: raw HID events driver (C) Jiri Kosina
[    2.412457] usbcore: registered new interface driver usbhid
[    2.412462] usbhid: USB HID core driver
[    2.414748] fbcon: inteldrmfb (fb0) is primary device
[    2.414782] Console: switching to colour frame buffer device 170x48
[    2.414815] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.414818] i915 0000:00:02.0: registered panic notifier
[    2.415297] input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:1BCF:05CA.0001/input/input5
[    2.417092] hid-generic 0003:1BCF:05CA.0001: input,hidraw0: USB HID v1.00 Keyboard [2.4GHz 2way RF Receiver] on usb-0000:00:14.0-2.2/input0
[    2.417491] input: 2.4GHz 2way RF Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:1BCF:05CA.0002/input/input6
[    2.417725] hid-generic 0003:1BCF:05CA.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [2.4GHz 2way RF Receiver] on usb-0000:00:14.0-2.2/input1
[    2.438315] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.438442] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    2.438567] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.833237] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    2.941506] Switched to clocksource tsc
[    9.822021] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.                                                               
[    9.824066] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00                                             
[    9.824070] mmcblk0rpmb: retrying using single block read
[    9.826121] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[    9.828152] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[    9.830189] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[    9.832220] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[    9.834257] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[    9.836301] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[    9.836306] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[    9.836311] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[   18.073848] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.                                                               
[   18.075892] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00                                             
[   18.075896] mmcblk0rpmb: retrying using single block read
[   18.077930] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   18.079957] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   18.081997] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   18.084034] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   18.086079] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   18.088115] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   18.088120] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[   18.088126] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[   18.141192] random: nonblocking pool is initialized
[   21.435799] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem
[   21.435804] EXT4-fs (mmcblk0p1): write access will be enabled during recovery
[   21.807412] EXT4-fs (mmcblk0p1): orphan cleanup on readonly fs
[   21.810524] EXT4-fs (mmcblk0p1): 5 orphan inodes deleted
[   21.810529] EXT4-fs (mmcblk0p1): recovery complete
[   21.816554] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[   22.040033] init: plymouth-upstart-bridge main process (195) killed by TERM signal
[   22.266172] Adding 1978364k swap on /dev/mmcblk0p5.  Priority:-1 extents:1 across:1978364k SSFS
[   22.401925] systemd-udevd[328]: starting version 208
[   22.494085] lp: driver loaded but no devices found
[   22.518174] ppdev: user-space parallel port driver
[   22.574379] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[   22.640571] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[   22.822870] mei_txe 0000:00:1a.0: irq 106 for MSI/MSI-X
[   22.871148] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.975479] cfg80211: Calling CRDA to update world regulatory domain
[   23.012651] media: Linux media interface: v0.10
[   23.019609] Linux video capture interface: v2.00
[   23.049533] Bluetooth: Core ver 2.19
[   23.053310] NET: Registered protocol family 31
[   23.053316] Bluetooth: HCI device and connection manager initialized
[   23.053354] Bluetooth: HCI socket layer initialized
[   23.053358] Bluetooth: L2CAP socket layer initialized
[   23.053390] Bluetooth: SCO socket layer initialized
[   23.070532] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b469)
[   23.082473] usbcore: registered new interface driver btusb
[   23.085052] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input8
[   23.085269] usbcore: registered new interface driver uvcvideo
[   23.085272] USB Video Class driver (1.1.1)
[   23.262074] audit: type=1400 audit(1418569004.530:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=526 comm="apparmor_parser"
[   23.262087] audit: type=1400 audit(1418569004.530:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=526 comm="apparmor_parser"
[   23.262094] audit: type=1400 audit(1418569004.530:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=526 comm="apparmor_parser"
[   23.263374] wl: module license 'MIXED/Proprietary' taints kernel.
[   23.263379] Disabling lock debugging due to kernel taint
[   23.271165] wl: module verification failed: signature and/or  required key missing - tainting kernel
[   23.304681] snd_hda_intel 0000:00:1b.0: irq 107 for MSI/MSI-X
[   23.383056] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   23.383063] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.383066] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   23.383069] sound hdaudioC0D0:    mono: mono_out=0x0
[   23.383072] sound hdaudioC0D0:    inputs:
[   23.383075] sound hdaudioC0D0:      Mic=0x12
[   23.544565] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[   23.544861] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.544865] Bluetooth: BNEP filters: protocol multicast
[   23.544876] Bluetooth: BNEP socket layer initialized
[   23.593758] Bluetooth: RFCOMM TTY layer initialized
[   23.593776] Bluetooth: RFCOMM socket layer initialized
[   23.593788] Bluetooth: RFCOMM ver 1.11
[   23.610484] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   23.611662] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   23.638942] intel_rapl: Found RAPL domain package
[   23.638948] intel_rapl: Found RAPL domain core
[   23.658715] audit: type=1400 audit(1418569004.926:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=610 comm="apparmor_parser"
[   23.658728] audit: type=1400 audit(1418569004.926:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=610 comm="apparmor_parser"
[   23.658735] audit: type=1400 audit(1418569004.926:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="third_party" pid=610 comm="apparmor_parser"
[   23.709827] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[   23.718593] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.   
[   23.719723] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.   
[   23.720844] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.   
[   23.721787] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.   
[   23.722015] input: SYN1B7D:01 06CB:2991 UNKNOWN as /devices/platform/80860F41:00/i2c-8/i2c-SYN1B7D:01/0018:06CB:2991.0003/input/input11
[   23.722464] hid-multitouch 0018:06CB:2991.0003: input,hidraw2: <UNKNOWN> HID v1.00 Mouse [SYN1B7D:01 06CB:2991] on
[   31.831343] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.                                                               
[   31.833459] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00                                             
[   31.833465] mmcblk0rpmb: retrying using single block read
[   31.835615] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   31.837663] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   31.839726] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   31.841919] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   31.844206] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   31.846313] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   31.846318] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[   31.846323] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[   31.866313] acer_wmi: Acer Laptop ACPI-WMI Extras
[   31.866333] acer_wmi: Function bitmap for Communication Button: 0x801
[   31.866491] acer_wmi: Brightness must be controlled by acpi video driver
[   31.890329] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
[   31.890867] input: Acer WMI hotkeys as /devices/virtual/input/input13
[   31.892224] input: Acer BMA150 accelerometer as /devices/virtual/input/input14
[   40.075035] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.                                                               
[   40.077170] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00                                             
[   40.077175] mmcblk0rpmb: retrying using single block read
[   40.079220] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   40.081261] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   40.083294] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   40.085332] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   40.087474] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   40.089510] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900                                                                             
[   40.089516] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[   40.089520] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[   40.135262] cfg80211: World regulatory domain updated:
[   40.135269] cfg80211:  DFS Master region: unset
[   40.135271] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   40.135275] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   40.135278] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   40.135281] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   40.135283] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   40.135286] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   40.170642] init: cups main process (614) killed by HUP signal
[   40.170666] init: cups main process ended, respawning
[   40.242880] init: failsafe main process (641) killed by TERM signal
[   40.412788] audit: type=1400 audit(1418569021.666:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=796 comm="apparmor_parser"
[   40.412804] audit: type=1400 audit(1418569021.666:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=796 comm="apparmor_parser"
[   40.412812] audit: type=1400 audit(1418569021.666:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=796 comm="apparmor_parser"
[   40.420466] audit: type=1400 audit(1418569021.674:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=796 comm="apparmor_parser"
[   40.420480] audit: type=1400 audit(1418569021.674:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=796 comm="apparmor_parser"
[   40.420487] audit: type=1400 audit(1418569021.674:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=796 comm="apparmor_parser"
[   40.420494] audit: type=1400 audit(1418569021.674:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=796 comm="apparmor_parser"
[   40.420501] audit: type=1400 audit(1418569021.674:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=796 comm="apparmor_parser"
[   40.767099] systemd-logind[868]: New seat seat0.
[   40.768747] systemd-logind[868]: Watching system buttons on /dev/input/event3 (Power Button)
[   40.768914] systemd-logind[868]: Watching system buttons on /dev/input/event7 (Video Bus)
[   40.770917] systemd-logind[868]: Watching system buttons on /dev/input/event0 (Power Button)
[   40.771111] systemd-logind[868]: Watching system buttons on /dev/input/event2 (Lid Switch)
[   40.771240] systemd-logind[868]: Watching system buttons on /dev/input/event1 (Sleep Button)
[   40.850189] r8169 0000:03:00.0 eth0: link down
[   40.850255] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   41.847003] init: plymouth-stop pre-start process (1305) terminated with status 1
[   41.884858] systemd-logind[868]: Failed to start unit user@111.service: Unknown unit: user@111.service
[   41.884870] systemd-logind[868]: Failed to start user service: Unknown unit: user@111.service
[   41.893426] systemd-logind[868]: New session 1 of user sddm.
[   41.893468] systemd-logind[868]: Linked /tmp/.X11-unix/X0 to /run/user/111/X11-display.
[   51.066373] systemd-logind[868]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
[   51.066387] systemd-logind[868]: Failed to start user service: Unknown unit: user@1000.service
[   51.075586] systemd-logind[868]: New session 2 of user pedro.
[   51.075628] systemd-logind[868]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[   62.010855] audit_printk_skb: 24 callbacks suppressed
[   62.010860] audit: type=1400 audit(1418569042.062:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2041 comm="apparmor_parser"
[   62.010874] audit: type=1400 audit(1418569042.062:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2041 comm="apparmor_parser"
[   62.025409] audit: type=1400 audit(1418569042.078:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=2041 comm="apparmor_parser"
[  358.662444] systemd-logind[868]: New session c1 of user pedro.
[  405.626381] systemd-logind[868]: New session 3 of user sddm.
[  421.254933] systemd-logind[868]: New session 4 of user pedro.
[ 1254.209690] perf interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

According to https://wiki.archlinux.org/index.php/Ac ... _partition, this

[ 9.822021] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 9.824066] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 9.824070] mmcblk0rpmb: retrying using single block read
[ 9.826121] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900

isn't a major issue, but happens on the eMMC (device memory, not some card)

It might break STR, though (if i/o on the root device is broken, several things will go down)
Do you actually suspend (into memory, device still consumes power) or rather hibernate (onto disk)?