Today I updated a bunch of packages (more than 800) and I don't know what happened but now when I try to login I see this message:

Code: Select all

Plasma is unable to start as it could not correctly use OpenGL 2. Please check that your graphic drivers are set up correctly.

I'm using openSUSE 13.2 and I have a NVIDIA, and I installed the drivers manually for the kernel correctly months ago (was working fine before the update)

Thanks in advance.

eXtremeDevil wrote:I'm using openSUSE 13.2 and I have a NVIDIA, and I installed the drivers manually for the kernel correctly months ago (was working fine before the update)

Reinstall the driver, the installation is apparently broken.

As the nvidia driver replaces system files, when you install certain updates (Xorg and Mesa in particular) the original files are being put back, breaking the nvidia driver.
And after a kernel update you need to recompile the driver's kernel module to make it work with the new kernel.

To save yourself from these hassles/problems, better use the official RPM packages:
https://en.opensuse.org/SDB:NVIDIA_drivers

OTOH, it sounds very suspicious that you got over 800 updates for openSUSE 13.2.
What repos are you using?

Code: Select all

zypper lr -d

You may have accidentally "upgraded" to Tumbleweed or something like that...

I ran the update. It was a long time since I booted that PC so it's normal that I have a lot. After the update, a new kernel was installed, and after that I installed my Nvidia driver.

eXtremeDevil wrote:After the update, a new kernel was installed, and after that I installed my Nvidia driver.

So it works now?

If not, please post /var/log/Xorg.0.log.

Your error message clearly states that OpenGL does not work.
That either means that something hasn't been installed properly, or the nvidia driver is not used at all (and Mesa's OpenGL is broken because the nvidia installer replaced the libraries with its own incompatible versions).

I'll post it tomorrow. But, before the login screen, I can see the nVidia logo, like it IS working.

Thanks.


EDIT


There you go:

Code: Select all

[  1323.421]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[  1323.421] X Protocol Version 11, Revision 0
[  1323.421] Build Operating System: openSUSE SUSE LINUX
[  1323.421] Current Operating System: Linux OPENSUSE 3.16.7-35-desktop #1 SMP PREEMPT Sun Feb 7 17:32:21 UTC 2016 (832c776) x86_64
[  1323.421] Kernel command line: root=/dev/sda2 resume=/dev/disk/by-id/ata-WDC_WD1600BEVS-60RST0_WD-WXC208921870-part1 splash=silent quiet clocksource=acpi_pm vga=0x365
[  1323.421] Build Date: 08 February 2016  10:43:38AM
[  1323.421] 
[  1323.421] Current version of pixman: 0.32.6
[  1323.421]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[  1323.421] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1323.421] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 16 15:28:19 2016
[  1323.422] (==) Using config file: "/etc/X11/xorg.conf"
[  1323.422] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1323.422] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1323.422] (==) ServerLayout "Layout0"
[  1323.422] (**) |-->Screen "Screen0" (0)
[  1323.422] (**) |   |-->Monitor "Monitor0"
[  1323.423] (**) |   |-->Device "Device0"
[  1323.423] (**) |-->Input Device "Keyboard0"
[  1323.423] (**) |-->Input Device "Mouse0"
[  1323.423] (==) Automatically adding devices
[  1323.423] (==) Automatically enabling devices
[  1323.423] (==) Automatically adding GPU devices
[  1323.423] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[  1323.423]    Entry deleted from font path.
[  1323.423] (==) FontPath set to:
   /usr/share/fonts/misc:unscaled,
   /usr/share/fonts/Type1/,
   /usr/share/fonts/100dpi:unscaled,
   /usr/share/fonts/75dpi:unscaled,
   /usr/share/fonts/ghostscript/,
   /usr/share/fonts/cyrillic:unscaled,
   /usr/share/fonts/truetype/,
   built-ins
[  1323.423] (==) ModulePath set to "/usr/lib64/xorg/modules"
[  1323.423] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  1323.423] (WW) Disabling Keyboard0
[  1323.423] (WW) Disabling Mouse0
[  1323.423] (II) Loader magic: 0x80ec80
[  1323.423] (II) Module ABI versions:
[  1323.423]    X.Org ANSI C Emulation: 0.4
[  1323.423]    X.Org Video Driver: 18.0
[  1323.423]    X.Org XInput driver : 21.0
[  1323.423]    X.Org Server Extension : 8.0
[  1323.423] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1323.425] (--) PCI:*(0:1:0:0) 10de:0425:103c:30cc rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
[  1323.425] (II) LoadModule: "glx"
[  1323.425] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[  1323.449] (II) Module glx: vendor="X.Org Foundation"
[  1323.449]    compiled for 1.16.1, module version = 1.0.0
[  1323.449]    ABI class: X.Org Server Extension, version 8.0
[  1323.449] (==) AIGLX enabled
[  1323.449] (II) LoadModule: "nvidia"
[  1323.449] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[  1323.453] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1323.453]    compiled for 4.0.2, module version = 1.0.0
[  1323.453]    Module class: X.Org Video Driver
[  1323.453] (II) NVIDIA dlloader X Driver  340.96  Sun Nov  8 21:46:28 PST 2015
[  1323.453] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1323.453] (++) using VT number 7

[  1323.453] (II) Loading sub module "fb"
[  1323.453] (II) LoadModule: "fb"
[  1323.453] (II) Loading /usr/lib64/xorg/modules/libfb.so
[  1323.454] (II) Module fb: vendor="X.Org Foundation"
[  1323.454]    compiled for 1.16.1, module version = 1.0.0
[  1323.454]    ABI class: X.Org ANSI C Emulation, version 0.4
[  1323.454] (WW) Unresolved symbol: fbGetGCPrivateKey
[  1323.454] (II) Loading sub module "wfb"
[  1323.454] (II) LoadModule: "wfb"
[  1323.454] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[  1323.455] (II) Module wfb: vendor="X.Org Foundation"
[  1323.455]    compiled for 1.16.1, module version = 1.0.0
[  1323.455]    ABI class: X.Org ANSI C Emulation, version 0.4
[  1323.455] (II) Loading sub module "ramdac"
[  1323.455] (II) LoadModule: "ramdac"
[  1323.455] (II) Module "ramdac" already built-in
[  1323.456] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  1323.456] (==) NVIDIA(0): RGB weight 888
[  1323.456] (==) NVIDIA(0): Default visual is TrueColor
[  1323.456] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1323.456] (**) NVIDIA(0): Enabling 2D acceleration
[  1323.456] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[  1323.456] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[  1323.456] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[  1323.456] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[  1323.456] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[  1323.849] (II) NVIDIA(0): Display (LPL (DFP-0)) does not support NVIDIA 3D Vision
[  1323.849] (II) NVIDIA(0):     stereo.
[  1323.849] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[  1323.851] (II) NVIDIA(0): NVIDIA GPU GeForce 8600M GS (G86) at PCI:1:0:0 (GPU-0)
[  1323.851] (--) NVIDIA(0): Memory: 524288 kBytes
[  1323.851] (--) NVIDIA(0): VideoBIOS: 60.86.4f.00.22
[  1323.851] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  1323.857] (--) NVIDIA(0): Valid display device(s) on GeForce 8600M GS at PCI:1:0:0
[  1323.857] (--) NVIDIA(0):     CRT-0
[  1323.857] (--) NVIDIA(0):     TV-0
[  1323.857] (--) NVIDIA(0):     LPL (DFP-0) (boot, connected)
[  1323.857] (--) NVIDIA(0):     DFP-1
[  1323.857] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  1323.857] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[  1323.857] (--) NVIDIA(0): LPL (DFP-0): Internal LVDS
[  1323.857] (--) NVIDIA(GPU-0): LPL (DFP-0): 330.0 MHz maximum pixel clock
[  1323.857] (--) NVIDIA(0): DFP-1: Internal TMDS
[  1323.857] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[  1323.857] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  1323.857] (**) NVIDIA(0):     device LPL (DFP-0) (Using EDID frequencies has been
[  1323.857] (**) NVIDIA(0):     enabled on all display devices.)
[  1323.857] (==) NVIDIA(0):
[  1323.857] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  1323.857] (==) NVIDIA(0):     will be used as the requested mode.
[  1323.857] (==) NVIDIA(0):
[  1323.857] (II) NVIDIA(0): Validated MetaModes:
[  1323.857] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[  1323.857] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[  1324.889] (--) NVIDIA(0): DPI set to (98, 99); computed from "UseEdidDpi" X config
[  1324.889] (--) NVIDIA(0):     option
[  1324.889] (--) Depth 24 pixmap format is 32 bpp
[  1324.889] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[  1324.901] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[  1325.233] (==) NVIDIA(0): Disabling shared memory pixmaps
[  1325.233] (==) NVIDIA(0): Backing store enabled
[  1325.233] (==) NVIDIA(0): Silken mouse enabled
[  1325.233] (**) NVIDIA(0): DPMS enabled
[  1325.233] (II) Loading sub module "dri2"
[  1325.233] (II) LoadModule: "dri2"
[  1325.233] (II) Module "dri2" already built-in
[  1325.234] (II) NVIDIA(0): [DRI2] Setup complete
[  1325.234] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  1325.234] (--) RandR disabled
[  1325.240] (II) AIGLX: Screen 0 is not DRI2 capable
[  1325.240] (EE) AIGLX: reverting to software rendering
[  1325.280] (EE) AIGLX error: dlopen of /usr/lib64/dri/swrast_dri.so failed (/usr/lib64/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch)
[  1325.280] (EE) GLX: could not load software renderer
[  1325.280] (II) GLX: no usable GL providers found for screen 0
[  1325.326] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[  1325.326] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1325.326] (**) Power Button: Applying InputClass "system-keyboard"
[  1325.326] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1325.326] (II) LoadModule: "evdev"
[  1325.327] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[  1325.328] (II) Module evdev: vendor="X.Org Foundation"
[  1325.328]    compiled for 1.16.1, module version = 2.9.0
[  1325.328]    Module class: X.Org XInput Driver
[  1325.328]    ABI class: X.Org XInput driver, version 21.0
[  1325.328] (II) Using input driver 'evdev' for 'Power Button'
[  1325.328] (**) Power Button: always reports core events
[  1325.328] (**) evdev: Power Button: Device: "/dev/input/event6"
[  1325.329] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1325.329] (--) evdev: Power Button: Found keys
[  1325.329] (II) evdev: Power Button: Configuring as keyboard
[  1325.329] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[  1325.329] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1325.329] (**) Option "xkb_rules" "evdev"
[  1325.329] (**) Option "xkb_model" "pc105"
[  1325.329] (**) Option "xkb_layout" "es"
[  1325.329] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1325.351] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[  1325.351] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1325.351] (**) Video Bus: Applying InputClass "system-keyboard"
[  1325.351] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1325.351] (II) Using input driver 'evdev' for 'Video Bus'
[  1325.351] (**) Video Bus: always reports core events
[  1325.351] (**) evdev: Video Bus: Device: "/dev/input/event7"
[  1325.351] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  1325.351] (--) evdev: Video Bus: Found keys
[  1325.351] (II) evdev: Video Bus: Configuring as keyboard
[  1325.351] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8/event7"
[  1325.351] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1325.351] (**) Option "xkb_rules" "evdev"
[  1325.351] (**) Option "xkb_model" "pc105"
[  1325.351] (**) Option "xkb_layout" "es"
[  1325.351] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1325.352] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1325.352] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1325.352] (**) Power Button: Applying InputClass "system-keyboard"
[  1325.352] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1325.352] (II) Using input driver 'evdev' for 'Power Button'
[  1325.352] (**) Power Button: always reports core events
[  1325.352] (**) evdev: Power Button: Device: "/dev/input/event3"
[  1325.352] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1325.352] (--) evdev: Power Button: Found keys
[  1325.352] (II) evdev: Power Button: Configuring as keyboard
[  1325.352] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[  1325.352] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  1325.352] (**) Option "xkb_rules" "evdev"
[  1325.352] (**) Option "xkb_model" "pc105"
[  1325.352] (**) Option "xkb_layout" "es"
[  1325.352] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1325.352] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[  1325.352] (II) No input driver specified, ignoring this device.
[  1325.352] (II) This device may have been added with another device file.
[  1325.352] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[  1325.352] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1325.352] (**) Sleep Button: Applying InputClass "system-keyboard"
[  1325.352] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1325.353] (II) Using input driver 'evdev' for 'Sleep Button'
[  1325.353] (**) Sleep Button: always reports core events
[  1325.353] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[  1325.353] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  1325.353] (--) evdev: Sleep Button: Found keys
[  1325.353] (II) evdev: Sleep Button: Configuring as keyboard
[  1325.353] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[  1325.353] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  1325.353] (**) Option "xkb_rules" "evdev"
[  1325.353] (**) Option "xkb_model" "pc105"
[  1325.353] (**) Option "xkb_layout" "es"
[  1325.353] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1325.353] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[  1325.353] (II) No input driver specified, ignoring this device.
[  1325.353] (II) This device may have been added with another device file.
[  1325.353] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[  1325.354] (II) No input driver specified, ignoring this device.
[  1325.354] (II) This device may have been added with another device file.
[  1325.354] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[  1325.354] (II) No input driver specified, ignoring this device.
[  1325.354] (II) This device may have been added with another device file.
[  1325.354] (II) config/udev: Adding input device Microsoft Microsoft Notebook Receiver v2.0 (/dev/input/event1)
[  1325.354] (**) Microsoft Microsoft Notebook Receiver v2.0: Applying InputClass "evdev pointer catchall"
[  1325.354] (**) Microsoft Microsoft Notebook Receiver v2.0: Applying InputClass "evdev pointer catchall"
[  1325.354] (II) Using input driver 'evdev' for 'Microsoft Microsoft Notebook Receiver v2.0'
[  1325.354] (**) Microsoft Microsoft Notebook Receiver v2.0: always reports core events
[  1325.354] (**) evdev: Microsoft Microsoft Notebook Receiver v2.0: Device: "/dev/input/event1"
[  1325.354] (--) evdev: Microsoft Microsoft Notebook Receiver v2.0: Vendor 0x45e Product 0xe1
[  1325.354] (--) evdev: Microsoft Microsoft Notebook Receiver v2.0: Found 9 mouse buttons
[  1325.354] (--) evdev: Microsoft Microsoft Notebook Receiver v2.0: Found scroll wheel(s)
[  1325.354] (--) evdev: Microsoft Microsoft Notebook Receiver v2.0: Found relative axes
[  1325.354] (--) evdev: Microsoft Microsoft Notebook Receiver v2.0: Found x and y relative axes
[  1325.354] (II) evdev: Microsoft Microsoft Notebook Receiver v2.0: Configuring as mouse
[  1325.354] (II) evdev: Microsoft Microsoft Notebook Receiver v2.0: Adding scrollwheel support
[  1325.354] (**) evdev: Microsoft Microsoft Notebook Receiver v2.0: YAxisMapping: buttons 4 and 5
[  1325.354] (**) evdev: Microsoft Microsoft Notebook Receiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1325.354] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:045E:00E1.0001/input/input3/event1"
[  1325.354] (II) XINPUT: Adding extended input device "Microsoft Microsoft Notebook Receiver v2.0" (type: MOUSE, id 10)
[  1325.354] (II) evdev: Microsoft Microsoft Notebook Receiver v2.0: initialized for relative axes.
[  1325.355] (**) Microsoft Microsoft Notebook Receiver v2.0: (accel) keeping acceleration scheme 1
[  1325.355] (**) Microsoft Microsoft Notebook Receiver v2.0: (accel) acceleration profile 0
[  1325.355] (**) Microsoft Microsoft Notebook Receiver v2.0: (accel) acceleration factor: 2.000
[  1325.355] (**) Microsoft Microsoft Notebook Receiver v2.0: (accel) acceleration threshold: 4
[  1325.355] (II) config/udev: Adding input device Microsoft Microsoft Notebook Receiver v2.0 (/dev/input/mouse0)
[  1325.355] (II) No input driver specified, ignoring this device.
[  1325.355] (II) This device may have been added with another device file.
[  1325.356] (II) config/udev: Adding input device HP Webcam (/dev/input/event9)
[  1325.356] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[  1325.356] (**) HP Webcam: Applying InputClass "system-keyboard"
[  1325.356] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[  1325.356] (II) Using input driver 'evdev' for 'HP Webcam'
[  1325.356] (**) HP Webcam: always reports core events
[  1325.356] (**) evdev: HP Webcam: Device: "/dev/input/event9"
[  1325.356] (--) evdev: HP Webcam: Vendor 0x4f2 Product 0xb023
[  1325.356] (--) evdev: HP Webcam: Found keys
[  1325.356] (II) evdev: HP Webcam: Configuring as keyboard
[  1325.356] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10/event9"
[  1325.356] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 11)
[  1325.356] (**) Option "xkb_rules" "evdev"
[  1325.356] (**) Option "xkb_model" "pc105"
[  1325.356] (**) Option "xkb_layout" "es"
[  1325.356] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1325.357] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1325.357] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1325.357] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[  1325.357] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1325.357] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1325.357] (**) AT Translated Set 2 keyboard: always reports core events
[  1325.357] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1325.357] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  1325.357] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  1325.357] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  1325.357] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1325.357] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[  1325.357] (**) Option "xkb_rules" "evdev"
[  1325.357] (**) Option "xkb_model" "pc105"
[  1325.357] (**) Option "xkb_layout" "es"
[  1325.357] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1325.358] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
[  1325.358] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1325.358] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1325.358] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  1325.358] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[  1325.358] (II) LoadModule: "synaptics"
[  1325.358] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[  1325.360] (II) Module synaptics: vendor="X.Org Foundation"
[  1325.360]    compiled for 1.16.1, module version = 1.8.1
[  1325.360]    Module class: X.Org XInput Driver
[  1325.360]    ABI class: X.Org XInput driver, version 21.0
[  1325.360] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  1325.360] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1325.360] (**) Option "Device" "/dev/input/event2"
[  1325.391] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 52)
[  1325.391] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 86)
[  1325.391] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  1325.391] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  1325.391] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[  1325.391] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  1325.391] (**) Option "HorizEdgeScroll" "off"
[  1325.391] (**) Option "TapButton1" "1"
[  1325.391] (**) Option "TapButton2" "3"
[  1325.391] (**) Option "TapButton3" "2"
[  1325.392] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1325.392] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1325.406] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[  1325.406] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[  1325.406] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  1325.406] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[  1325.406] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[  1325.407] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  1325.407] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  1325.407] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1325.407] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1325.407] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1325.408] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[  1325.408] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  1325.409] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[  1325.409] (II) No input driver specified, ignoring this device.
[  1325.409] (II) This device may have been added with another device file.
[  1325.515] (II) UnloadModule: "synaptics"
[  1325.515] (II) evdev: AT Translated Set 2 keyboard: Close
[  1325.515] (II) UnloadModule: "evdev"
[  1325.515] (II) evdev: HP Webcam: Close
[  1325.515] (II) UnloadModule: "evdev"
[  1325.515] (II) evdev: Microsoft Microsoft Notebook Receiver v2.0: Close
[  1325.515] (II) UnloadModule: "evdev"
[  1325.515] (II) evdev: Sleep Button: Close
[  1325.515] (II) UnloadModule: "evdev"
[  1325.515] (II) evdev: Power Button: Close
[  1325.515] (II) UnloadModule: "evdev"
[  1325.515] (II) evdev: Video Bus: Close
[  1325.515] (II) UnloadModule: "evdev"
[  1325.515] (II) evdev: Power Button: Close
[  1325.515] (II) UnloadModule: "evdev"
[  1327.405] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[  1328.742] (==) NVIDIA(0): Disabling shared memory pixmaps
[  1328.742] (**) NVIDIA(0): DPMS enabled
[  1328.742] (II) Loading sub module "dri2"
[  1328.742] (II) LoadModule: "dri2"
[  1328.742] (II) Module "dri2" already built-in
[  1328.742] (II) NVIDIA(0): [DRI2] Setup complete
[  1328.742] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  1328.743] (--) RandR disabled
[  1328.749] (II) AIGLX: Screen 0 is not DRI2 capable
[  1328.749] (EE) AIGLX: reverting to software rendering
[  1328.786] (EE) AIGLX error: dlopen of /usr/lib64/dri/swrast_dri.so failed (/usr/lib64/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch)
[  1328.786] (EE) GLX: could not load software renderer
[  1328.786] (II) GLX: no usable GL providers found for screen 0
[  1328.832] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[  1328.832] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1328.832] (**) Power Button: Applying InputClass "system-keyboard"
[  1328.832] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1328.832] (II) Using input driver 'evdev' for 'Power Button'
[  1328.832] (**) Power Button: always reports core events
[  1328.832] (**) evdev: Power Button: Device: "/dev/input/event6"
[  1328.832] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1328.833] (--) evdev: Power Button: Found keys
[  1328.833] (II) evdev: Power Button: Configuring as keyboard
[  1328.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[  1328.833] (**) Option "xkb_rules" "evdev"
[  1328.833] (**) Option "xkb_model" "pc105"
[  1328.833] (**) Option "xkb_layout" "es"
[  1328.833] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1328.862] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[  1328.862] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1328.862] (**) Video Bus: Applying InputClass "system-keyboard"
[  1328.862] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1328.862] (II) Using input driver 'evdev' for 'Video Bus'
[  1328.862] (**) Video Bus: always reports core events
[  1328.862] (**) evdev: Video Bus: Device: "/dev/input/event7"
[  1328.862] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  1328.862] (--) evdev: Video Bus: Found keys
[  1328.862] (II) evdev: Video Bus: Configuring as keyboard
[  1328.862] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8/event7"
[  1328.862] (**) Option "xkb_rules" "evdev"
[  1328.862] (**) Option "xkb_model" "pc105"
[  1328.862] (**) Option "xkb_layout" "es"
[  1328.862] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1328.863] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1328.863] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1328.863] (**) Power Button: Applying InputClass "system-keyboard"
[  1328.863] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1328.863] (II) Using input driver 'evdev' for 'Power Button'
[  1328.863] (**) Power Button: always reports core events
[  1328.863] (**) evdev: Power Button: Device: "/dev/input/event3"
[  1328.863] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1328.863] (--) evdev: Power Button: Found keys
[  1328.863] (II) evdev: Power Button: Configuring as keyboard
[  1328.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[  1328.863] (**) Option "xkb_rules" "evdev"
[  1328.863] (**) Option "xkb_model" "pc105"
[  1328.863] (**) Option "xkb_layout" "es"
[  1328.863] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1328.863] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[  1328.863] (II) No input driver specified, ignoring this device.
[  1328.863] (II) This device may have been added with another device file.
[  1328.864] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[  1328.864] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1328.864] (**) Sleep Button: Applying InputClass "system-keyboard"
[  1328.864] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1328.864] (II) Using input driver 'evdev' for 'Sleep Button'
[  1328.864] (**) Sleep Button: always reports core events
[  1328.864] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[  1328.864] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  1328.864] (--) evdev: Sleep Button: Found keys
[  1328.864] (II) evdev: Sleep Button: Configuring as keyboard
[  1328.864] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[  1328.864] (**) Option "xkb_rules" "evdev"
[  1328.864] (**) Option "xkb_model" "pc105"
[  1328.864] (**) Option "xkb_layout" "es"
[  1328.864] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1328.864] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[  1328.864] (II) No input driver specified, ignoring this device.
[  1328.864] (II) This device may have been added with another device file.
[  1328.864] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[  1328.864] (II) No input driver specified, ignoring this device.
[  1328.864] (II) This device may have been added with another device file.
[  1328.864] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[  1328.864] (II) No input driver specified, ignoring this device.
[  1328.864] (II) This device may have been added with another device file.
[  1328.864] (II) config/udev: Adding input device Microsoft Microsoft Notebook Receiver v2.0 (/dev/input/event1)
[  1328.864] (**) Microsoft Microsoft Notebook Receiver v2.0: Applying InputClass "evdev pointer catchall"
[  1328.864] (**) Microsoft Microsoft Notebook Receiver v2.0: Applying InputClass "evdev pointer catchall"
[  1328.864] (II) Using input driver 'evdev' for 'Microsoft Microsoft Notebook Receiver v2.0'
[  1328.864] (**) Microsoft Microsoft Notebook Receiver v2.0: always reports core events
[  1328.864] (**) evdev: Microsoft Microsoft Notebook Receiver v2.0: Device: "/dev/input/event1"
[  1328.866] (--) evdev: Microsoft Microsoft Notebook Receiver v2.0: Vendor 0x45e Product 0xe1
[  1328.866] (--) evdev: Microsoft Microsoft Notebook Receiver v2.0: Found 9 mouse buttons
[  1328.866] (--) evdev: Microsoft Microsoft Notebook Receiver v2.0: Found scroll wheel(s)
[  1328.866] (--) evdev: Microsoft Microsoft Notebook Receiver v2.0: Found relative axes
[  1328.866] (--) evdev: Microsoft Microsoft Notebook Receiver v2.0: Found x and y relative axes
[  1328.866] (II) evdev: Microsoft Microsoft Notebook Receiver v2.0: Configuring as mouse
[  1328.866] (II) evdev: Microsoft Microsoft Notebook Receiver v2.0: Adding scrollwheel support
[  1328.866] (**) evdev: Microsoft Microsoft Notebook Receiver v2.0: YAxisMapping: buttons 4 and 5
[  1328.866] (**) evdev: Microsoft Microsoft Notebook Receiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1328.866] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:045E:00E1.0001/input/input3/event1"
[  1328.866] (II) evdev: Microsoft Microsoft Notebook Receiver v2.0: initialized for relative axes.
[  1328.866] (**) Microsoft Microsoft Notebook Receiver v2.0: (accel) keeping acceleration scheme 1
[  1328.866] (**) Microsoft Microsoft Notebook Receiver v2.0: (accel) acceleration profile 0
[  1328.866] (**) Microsoft Microsoft Notebook Receiver v2.0: (accel) acceleration factor: 2.000
[  1328.866] (**) Microsoft Microsoft Notebook Receiver v2.0: (accel) acceleration threshold: 4
[  1328.866] (II) config/udev: Adding input device Microsoft Microsoft Notebook Receiver v2.0 (/dev/input/mouse0)
[  1328.866] (II) No input driver specified, ignoring this device.
[  1328.866] (II) This device may have been added with another device file.
[  1328.867] (II) config/udev: Adding input device HP Webcam (/dev/input/event9)
[  1328.867] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[  1328.867] (**) HP Webcam: Applying InputClass "system-keyboard"
[  1328.867] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[  1328.867] (II) Using input driver 'evdev' for 'HP Webcam'
[  1328.867] (**) HP Webcam: always reports core events
[  1328.867] (**) evdev: HP Webcam: Device: "/dev/input/event9"
[  1328.867] (--) evdev: HP Webcam: Vendor 0x4f2 Product 0xb023
[  1328.867] (--) evdev: HP Webcam: Found keys
[  1328.867] (II) evdev: HP Webcam: Configuring as keyboard
[  1328.867] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10/event9"
[  1328.867] (**) Option "xkb_rules" "evdev"
[  1328.867] (**) Option "xkb_model" "pc105"
[  1328.867] (**) Option "xkb_layout" "es"
[  1328.867] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1328.867] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1328.868] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1328.868] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[  1328.868] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1328.868] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1328.868] (**) AT Translated Set 2 keyboard: always reports core events
[  1328.868] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1328.868] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  1328.868] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  1328.868] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  1328.868] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1328.868] (**) Option "xkb_rules" "evdev"
[  1328.868] (**) Option "xkb_model" "pc105"
[  1328.868] (**) Option "xkb_layout" "es"
[  1328.868] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1328.868] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
[  1328.868] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1328.868] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1328.868] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  1328.868] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[  1328.868] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  1328.868] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1328.868] (**) Option "Device" "/dev/input/event2"
[  1328.892] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 52)
[  1328.892] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 86)
[  1328.892] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  1328.892] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  1328.892] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[  1328.892] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  1328.892] (**) Option "HorizEdgeScroll" "off"
[  1328.892] (**) Option "TapButton1" "1"
[  1328.892] (**) Option "TapButton2" "3"
[  1328.892] (**) Option "TapButton3" "2"
[  1328.892] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1328.892] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1328.907] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[  1328.907] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  1328.907] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[  1328.907] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[  1328.907] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  1328.907] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  1328.907] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1328.907] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1328.907] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1328.908] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[  1328.908] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  1328.909] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[  1328.909] (II) No input driver specified, ignoring this device.
[  1328.909] (II) This device may have been added with another device file.
[  1336.020] (II) UnloadModule: "synaptics"
[  1336.020] (II) evdev: AT Translated Set 2 keyboard: Close
[  1336.020] (II) UnloadModule: "evdev"
[  1336.020] (II) evdev: HP Webcam: Close
[  1336.020] (II) UnloadModule: "evdev"
[  1336.020] (II) evdev: Microsoft Microsoft Notebook Receiver v2.0: Close
[  1336.020] (II) UnloadModule: "evdev"
[  1336.020] (II) evdev: Sleep Button: Close
[  1336.020] (II) UnloadModule: "evdev"
[  1336.020] (II) evdev: Power Button: Close
[  1336.020] (II) UnloadModule: "evdev"
[  1336.020] (II) evdev: Video Bus: Close
[  1336.020] (II) UnloadModule: "evdev"
[  1336.021] (II) evdev: Power Button: Close
[  1336.021] (II) UnloadModule: "evdev"
[  1337.896] (II) NVIDIA(GPU-0): Deleting GPU-0
[  1337.979] (EE) Server terminated successfully (0). Closing log file.


eXtremeDevil wrote:I'll post it tomorrow. But, before the login screen, I can see the nVidia logo, like it IS working.

Well, the nvidia driver is working, but not its OpenGL support.

Code: Select all

[  1323.425] (II) LoadModule: "glx"
[  1323.425] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[  1323.449] (II) Module glx: vendor="X.Org Foundation"        <=============
[  1323.449]    compiled for 1.16.1, module version = 1.0.0
[  1323.449]    ABI class: X.Org Server Extension, version 8.0
...
[  1323.456] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[  1323.456] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[  1323.456] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[  1323.456] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[  1323.456] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.


As you can see, Xorg's libglx is in use.

So again, reinstall the nvidia driver, this should replace Xorg's libglx with nvidia's version.

I'm going to reinstall right now and see what happens, thanks.

EDIT

I reinstalled the driver, it started to clean up weird stuff from previous installation, and when it finished it asked for configuring xf86config or xorg.conf file as appropiate, so I ran nvidia-xconfig. And now seems to work. Thanks a lot guys!!

Although now it seems to open IceWM by default, instead of Plasma... where can I change that?

eXtremeDevil wrote:I reinstalled the driver, it started to clean up weird stuff from previous installation, and when it finished it asked for configuring xf86config or xorg.conf file as appropiate, so I ran nvidia-xconfig.

Actually an xorg.conf (or running nvidia-xconfig) is not necessary (unless you want to adjust some settings yourself).
The nvidia driver will be used automatically if installed.

And now seems to work. Thanks a lot guys!!

Great!

Although now it seems to open IceWM by default, instead of Plasma... where can I change that?

Normally you should be able to choose at the login screen.
If you have Auto-login enabled, just logout and you should get to the login screen.

Which display/login manager are you using now?
For xdm (which doesn't provide an option to choose the desktop session), you'd need to set it in /etc/sysconfig/windowmanager (option DEFAULT_WM, for Plasma5 set it to "plasma5").

Cool, thanks.