Hello,
I am french, my English is not very good.

I'm trying to install mobile plasma on a nexus 5X.
The bootloader is rusted and the phone is root
I then followed step 1B of this page:
https://www.plasma-mobile.org/neon-arch ... ce-rootfs/

The commands are chained without error.
Here is the result of the orders:

Code: Select all

fastboot format cache
Creating filesystem with parameters:
    Size: 100663296
    Block size: 4096
    Blocks per group: 32768
    Inodes per group: 6144
    Inode size: 256
    Journal blocks: 1024
    Label:
    Blocks: 24576
    Block groups: 1
    Reserved block group size: 7
Created filesystem with 11/6144 inodes and 1422/24576 blocks
target reported max download size of 536870912 bytes
erasing 'cache'...
OKAY [  0.075s]
sending 'cache' (5688 KB)...
OKAY [  0.200s]
writing 'cache'...
OKAY [  0.108s]
finished. total time: 0.382s
root@ordinator:~# fastboot format userdata
Creating filesystem with parameters:
    Size: 11773390848
    Block size: 4096
    Blocks per group: 32768
    Inodes per group: 8176
    Inode size: 256
    Journal blocks: 32768
    Label:
    Blocks: 2874363
    Block groups: 88
    Reserved block group size: 703
Created filesystem with 11/719488 inodes and 84965/2874363 blocks
target reported max download size of 536870912 bytes
erasing 'userdata'...
OKAY [  0.513s]
sending 'userdata' (136726 KB)...
OKAY [  3.382s]
writing 'userdata'...
OKAY [  2.200s]
finished. total time: 6.095s
root@ordinator:~# git clone https://github.com/plasma-phone-packaging/pm-flashtool.git
le chemin de destination 'pm-flashtool' existe déjà et n'est pas un répertoire vide.
root@ordinator:~# cd pm-flashtool
root@ordinator:~/pm-flashtool# ./pm-flash -c
+ CACHEDIR=cache
+ echo 'Waiting for device to be in the fastboot mode'
Waiting for device to be in the fastboot mode
+ fastboot getvar product
product: bullhead
finished. total time: 0.020s
++ fastboot getvar product
++ head -1
++ awk '-F: ' '{print $2}'
+ DEVICE_NAME=bullhead
+ confirm 'Connected device is bullhead, is that correct? [y/N]'
+ read -r -p 'Connected device is bullhead, is that correct? [y/N] ' response
Connected device is bullhead, is that correct? [y/N] y
+ case $response in
+ true
+ PLATFORM=neon
+ echo 'Continuing ...'
Continuing ...
+ getopts cp: opt
+ case $opt in
+ echo 'Option provided to use cache, not downloading files again'
Option provided to use cache, not downloading files again
+ NOCACHE=1
+ getopts cp: opt
+ '[' -z 1 ']'
+ flash-phone bullhead
+ '[' 1 -eq 0 ']'
+ echo -n 'Flashing recovery image ... '
Flashing recovery image ... + fastboot flash recovery cache/bullhead/recovery.img
root@ordinator:~/pm-flashtool#

And then, nothing happens anymore. I do not know if everyone settles or not.
I wait more than an hour and nothing happens.
Am I making a mistake?
One forgets ?
Would you like to help me ?
Thank you for your help and advice

4 hours later nothing happens....
Usul

Hello,
Nobody ? Please, thank's.

Run ./flash-vendor

See https://cubiclenate.com/2018/09/22/plas ... -nexus-5x/