plasma-applet-thermal-monitor CPU, GPU view dont work Neon 5.22

Sensors have changed. You must change this in the applet too. Here on my Intel CPU it was the same. Now it works.

I Have Manjaro and Arch with new plasma 5.22 and thermal-monitor normal wokr. New Neon plasma new problems.
AMD CPU Fx 6100 ASUS AMD GPU

Does anyone have a suggestion, specifically what should I do

Strange, after last reboot, it did not work again I'am not able to choose the source.

Downloading from the net from the Neon distribution is not working properly, reports errors, I tried to download the widget, the theme. The thermal monitor only has to download the old version from a few years ago in which it is fixed because even then there were problems



Network error value is 2 or 5

today, update plasma 5.22.1, now widget delivery doesn't work at all

error 2, 4 or 5

In Neon kernel moduls is on /usr/lib/x86_64-linux-gnu/qt5/plugins/ksystemstats and thermal monitor dont work
In Arch and Manjaro kernel modul is on /ArchR/usr/lib/qt/plugins/ksystemstats
How to solve the problem in Neon, most likely widget is looking for the path as in Arch

Code: Select all

$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +36.0°C  (high = +70.0°C)
                       (crit = +52.0°C, hyst = +49.0°C)

amdgpu-pci-0100
Adapter: PCI adapter
vddgfx:      718.00 mV
fan1:        1244 RPM  (min =    0 RPM, max = 3600 RPM)
edge:         +48.0°C  (crit = +94.0°C, hyst = -273.1°C)
power1:       11.06 W  (cap =  60.00 W)

fam15h_power-pci-00c4
Adapter: PCI adapter
power1:       27.38 W  (crit =  95.01 W)

f71889a-isa-0480
Adapter: ISA adapter
+3.3V:         3.31 V 
in1:         968.00 mV (max =  +2.04 V)
in2:           1.10 V 
in3:         888.00 mV
in4:         624.00 mV
in5:           1.36 V 
in6:           1.66 V 
3VSB:          3.31 V 
Vbat:          3.34 V 
fan1:        1405 RPM
fan2:           0 RPM  ALARM
fan3:        1421 RPM
temp1:        +51.0°C  (high = +85.0°C, hyst = +81.0°C)
                       (crit = +80.0°C, hyst = +76.0°C)  sensor = transistor
temp2:        +51.0°C  (high = +85.0°C, hyst = +79.0°C)
                       (crit = +109.0°C, hyst = +103.0°C)  sensor = thermistor
temp3:        +41.0°C  (high = +70.0°C, hyst = +68.0°C)
                       (crit = +85.0°C, hyst = +83.0°C)  sensor = transistor



Same output in Manjaro, Arch and Neon but not working in Neon, same widget version

I instal new Neon , netspeed dont work, thermal monitor dnot work, kalendar only 5 events. >80% programs snap or flatpak.

Plasam is update from 5.23.2 to 5.23.3 but Thermal monitor dont work. I tray install in Debian kali and thermal monitor work.

I have on the computer two versions Neon User edition, one Neon Update Plasm from 5.21 to 5.22 and another instalation with Plasmo 5.22. Today, Plasma progressed, Update, 5.22.3 to 5.22.4. I'm trying to run Thermal Monitor who works in all other linux on my computer but it doesn't work on Neon. I wrote on the forum but there is no explanation, was that widget abolished in neon or something forgotten to be done? There is no answer and I think that is very frustrating because the forum serves to resulate problems and not to boast that distribution. After losing time for Thermal Monitor to work that no one cares about ordinary users, it seems that the authors are to take it or leave us, you don't care what your widget doesn't work.


xxx kde plasma other linux


plaasma 5.22.x Neon thermal monitor dont work

Install ksysguard and reboot.