Hi all,

I'm using a triple monitor setup with two monitors connected via HDMI and on connected via DP. After updating a week or so ago die DP Monitor won't show an image on boot unless I ctrl+alt+f12 and change back too the desktop with ctrl+alt+f1. After that everything works just fine, but it's a bit tedious to do that workaround every boot.

I looked at dmesg but can't see an issue with causes this.

Any help is very welcome

Output of dmesg -l err,warn,emerg,alert,crit below.

Code: Select all

[    0.108482] x86/cpu: SGX disabled by BIOS.
[    0.142199] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.142199] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.142199]   #7  #8  #9 #10 #11
[    0.149578] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.356888] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.356897] No Local Variables are initialized for Method [_CPC]

[    0.356899] No Arguments are initialized for method [_CPC]

[    0.356901] ACPI Error: Aborting method \_PR.PR01._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.356940] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.356949] No Local Variables are initialized for Method [_CPC]

[    0.356950] No Arguments are initialized for method [_CPC]

[    0.356952] ACPI Error: Aborting method \_PR.PR02._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.356989] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.356995] No Local Variables are initialized for Method [_CPC]

[    0.356996] No Arguments are initialized for method [_CPC]

[    0.356998] ACPI Error: Aborting method \_PR.PR03._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.357034] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.357040] No Local Variables are initialized for Method [_CPC]

[    0.357042] No Arguments are initialized for method [_CPC]

[    0.357043] ACPI Error: Aborting method \_PR.PR04._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.357078] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.357085] No Local Variables are initialized for Method [_CPC]

[    0.357086] No Arguments are initialized for method [_CPC]

[    0.357087] ACPI Error: Aborting method \_PR.PR05._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.357124] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.357130] No Local Variables are initialized for Method [_CPC]

[    0.357131] No Arguments are initialized for method [_CPC]

[    0.357132] ACPI Error: Aborting method \_PR.PR06._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.357169] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.357175] No Local Variables are initialized for Method [_CPC]

[    0.357176] No Arguments are initialized for method [_CPC]

[    0.357178] ACPI Error: Aborting method \_PR.PR07._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.357213] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.357220] No Local Variables are initialized for Method [_CPC]

[    0.357221] No Arguments are initialized for method [_CPC]

[    0.357222] ACPI Error: Aborting method \_PR.PR08._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.357258] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.357265] No Local Variables are initialized for Method [_CPC]

[    0.357266] No Arguments are initialized for method [_CPC]

[    0.357267] ACPI Error: Aborting method \_PR.PR09._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.357304] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.357311] No Local Variables are initialized for Method [_CPC]

[    0.357312] No Arguments are initialized for method [_CPC]

[    0.357313] ACPI Error: Aborting method \_PR.PR10._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.357350] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.PR00._CPC], AE_NOT_FOUND (20210730/psargs-330)

[    0.357357] No Local Variables are initialized for Method [_CPC]

[    0.357358] No Arguments are initialized for method [_CPC]

[    0.357359] ACPI Error: Aborting method \_PR.PR11._CPC due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[    0.382988] rtc rtc0: invalid alarm value: 2022-10-28T23:61:28
[    0.383457] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    0.383545] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.383546] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.383547] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.383548] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.383549] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.383550] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.383551] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.383552] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.383553] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.421827] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff]
[    0.421830] caller pmc_core_probe+0xb9/0x710 mapping multiple BARs
[    0.761007] nvme nvme0: missing or invalid SUBNQN field.
[    0.865085] usb: port power management may be unreliable
[    1.138062] ata2.00: supports DRM functions and may not be fully accessible
[    1.138089] ata3.00: supports DRM functions and may not be fully accessible
[    1.139061] ata5.00: ATA Identify Device Log not supported
[    1.140500] ata4.00: ATA Identify Device Log not supported
[    1.140669] ata5.00: ATA Identify Device Log not supported
[    1.141605] ata3.00: supports DRM functions and may not be fully accessible
[    1.143278] ata2.00: supports DRM functions and may not be fully accessible
[    1.145037] ata6.00: ATA Identify Device Log not supported
[    1.145636] ata4.00: ATA Identify Device Log not supported
[    1.157913] ata6.00: ATA Identify Device Log not supported
[    1.347044] hid-generic 0003:0D8C:0066.0001: No inputs registered, leaving
[    8.542311] nvidia: loading out-of-tree module taints kernel.
[    8.542323] nvidia: module license 'NVIDIA' taints kernel.
[    8.542324] Disabling lock debugging due to kernel taint

[    8.696110] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  520.56.06  Thu Oct  6 21:38:55 UTC 2022
[    8.820688] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint.
[   14.835540] CIFS: No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1) specify vers=1.0 on mount.
[   14.836777] FS-Cache: Duplicate cookie detected
[   14.836780] FS-Cache: O-cookie c=00000003 [p=00000002 fl=222 nc=0 na=1]
[   14.836781] FS-Cache: O-cookie d=00000000783cdce9{CIFS.server} n=00000000f6fe7271
[   14.836783] FS-Cache: O-key=[8] '020001bdc0a8b2dc'
[   14.836787] FS-Cache: N-cookie c=00000004 [p=00000002 fl=2 nc=0 na=1]
[   14.836789] FS-Cache: N-cookie d=00000000783cdce9{CIFS.server} n=00000000a50baa2c
[   14.836790] FS-Cache: N-key=[8] '020001bdc0a8b2dc'
[   15.596002] VBoxNetFlt: Successfully started.
[   15.602296] VBoxNetAdp: Successfully started.
[   26.245759] hub 1-6.1:1.0: hub_ext_port_status failed (err = -71)
[   26.245763] hub_port_connect: 33 callbacks suppressed
[   26.245764] usb 1-6.1-port2: connect-debounce failed
[   26.245882] hub 1-6.1:1.0: hub_ext_port_status failed (err = -71)