When booting screen sticks at a tty1 screen for 30 seconds. I know very little about KDE or Linux so bear with me. I ran dmesg in terminal and came up with these results in which I cannot decipher and thought perhaps someone here could help me.

pootermachine@pootermachine-HP-Pavilion-g7-Notebook-PC:~/Documents$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-42-generic (buildd@klock) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #63~precise1-Ubuntu SMP Fri Jul 4 21:19:31 UTC 2014 (Ubuntu 3.8.0-42.63~precise1-generic 3.8.13.23)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df9befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df9bf000-0x00000000dfabefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dfabf000-0x00000000dfbbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfbf4fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dfbf5000-0x00000000dfbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000186ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000187000000-0x000000019effffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion g7 Notebook PC/3562, BIOS F.53 10/23/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x187000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DFBBD000 mask FFFFFF000 uncachable
[ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000019f000000 aka 6640M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[ 0.000000] RAMDISK: [mem 0x35444000-0x36a19fff]
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT dfbf4120 0007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP dfbf3000 000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT dfbe0000 0EC77 (v01 HP INSYDE F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS dfb87000 00040
[ 0.000000] ACPI: HPET dfbf2000 00038 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC dfbf1000 00084 (v02 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG dfbf0000 0003C (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! dfbef000 000A5 (v32 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT dfbdf000 00028 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC dfbde000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDRT dfbdd000 00047 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT dfbdc000 001AC (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT dfbdb000 003DE (v01 HP INSYDE 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT dfbd9000 0168E (v02 HP INSYDE 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 5364MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x86ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdf9befff]
[ 0.000000] node 0: [mem 0xdfbf5000-0xdfbfffff]
[ 0.000000] node 0: [mem 0x00000000-0x86ffffff]
[ 0.000000] On node 0 totalpages: 1468761
[ 0.000000] free_area_init_node: node 0, pgdat c1932280, node_mem_map f2364200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 10729 pages used for memmap
[ 0.000000] HighMem zone: 1229795 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34880 r0 d22464 u57344
[ 0.000000] pcpu-alloc: s34880 r0 d22464 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1456248
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-42-generic root=UUID=2bbedf54-5cbe-417e-b4f4-02696f1dd9b3 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 12812160 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00187000)
[ 0.000000] Memory: 5777784k/6406144k available (6374k kernel code, 97260k reserved, 3090k data, 796k init, 4962096k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc193f000 - 0xc1a06000 ( 796 kB)
[ 0.000000] .data : 0xc1639aed - 0xc193e580 (3090 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1639aed (6374 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f1c08000 soft=f1c0a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1646.552 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3293.10 BogoMIPS (lpj=6586208)
[ 0.000011] pid_max: default: 32768 minimum: 301
[ 0.000066] Security Framework initialized
[ 0.000085] AppArmor: AppArmor initialized
[ 0.000088] Yama: becoming mindful.
[ 0.000187] Mount-cache hash table entries: 512
[ 0.000557] Initializing cgroup subsys cpuacct
[ 0.000564] Initializing cgroup subsys memory
[ 0.000581] Initializing cgroup subsys devices
[ 0.000585] Initializing cgroup subsys freezer
[ 0.000590] Initializing cgroup subsys blkio
[ 0.000594] Initializing cgroup subsys perf_event
[ 0.000600] Initializing cgroup subsys hugetlb
[ 0.000652] CPU: Physical Processor ID: 0
[ 0.000656] CPU: Processor Core ID: 0
[ 0.000663] mce: CPU supports 6 MCE banks
[ 0.000687] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.000687] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.000687] tlb_flushall_shift: 5
[ 0.001296] Freeing SMP alternatives: 24k freed
[ 0.005971] ACPI: Core revision 20121018
[ 0.031247] ftrace: allocating 28912 entries in 57 pages
[ 0.063745] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.064224] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.103860] smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[ 0.210827] Performance Events: AMD PMU driver.
[ 0.210836] ... version: 0
[ 0.210839] ... bit width: 48
[ 0.210841] ... generic registers: 4
[ 0.210844] ... value mask: 0000ffffffffffff
[ 0.210848] ... max period: 00007fffffffffff
[ 0.210850] ... fixed-purpose events: 0
[ 0.210853] ... event mask: 000000000000000f
[ 0.213133] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.213386] CPU 1 irqstacks, hard=f1d08000 soft=f1d0a000
[ 0.223393] Initializing CPU#1
[ 0.213391] smpboot: Booting Node 0, Processors #1
[ 0.226536] Brought up 2 CPUs
[ 0.226544] smpboot: Total of 2 processors activated (6586.20 BogoMIPS)
[ 0.227720] devtmpfs: initialized
[ 0.228060] EVM: security.selinux
[ 0.228064] EVM: security.SMACK64
[ 0.228067] EVM: security.capability
[ 0.228262] PM: Registering ACPI NVS region [mem 0xdfabf000-0xdfbbefff] (1048576 bytes)
[ 0.230323] regulator-dummy: no parameters
[ 0.230445] NET: Registered protocol family 16
[ 0.230709] EISA bus registered
[ 0.231008] ACPI: bus type pci registered
[ 0.231182] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.231189] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.231192] PCI: Using MMCONFIG for extended config space
[ 0.231195] PCI: Using configuration type 1 for base access
[ 0.233692] bio: create slab <bio-0> at 0
[ 0.234026] ACPI: Added _OSI(Module Device)
[ 0.234035] ACPI: Added _OSI(Processor Device)
[ 0.234039] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.234043] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.238497] ACPI: EC: Look up EC in DSDT
[ 0.243582] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.251797] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.269270] ACPI: Interpreter enabled
[ 0.269290] ACPI: (supports S0 S3 S4 S5)
[ 0.269335] ACPI: Using IOAPIC for interrupt routing
[ 0.692971] ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[ 0.693270] ACPI: No dock devices found.
[ 0.693282] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.693752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.693764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.694577] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[ 0.694589] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.694664] PCI host bridge to bus 0000:00
[ 0.694671] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.694677] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.694682] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.694687] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.694691] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.694696] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.694700] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.694705] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.694709] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.694713] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.694718] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.694722] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.694726] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.694731] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.694735] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.694740] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
[ 0.694744] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 0.694749] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 0.694766] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.694834] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
[ 0.694852] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.694864] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.694876] pci 0000:00:01.0: reg 18: [mem 0xf0400000-0xf043ffff]
[ 0.694945] pci 0000:00:01.0: supports D1 D2
[ 0.694973] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.694989] pci 0000:00:01.1: reg 10: [mem 0xf0444000-0xf0447fff]
[ 0.695070] pci 0000:00:01.1: supports D1 D2
[ 0.695108] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.695195] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.695300] pci 0000:00:11.0: [1002:4394] type 00 class 0x010601
[ 0.695329] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 0.695345] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 0.695361] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 0.695376] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 0.695392] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 0.695407] pci 0000:00:11.0: reg 24: [mem 0xf044e000-0xf044e3ff]
[ 0.695495] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.695517] pci 0000:00:12.0: reg 10: [mem 0xf044d000-0xf044dfff]
[ 0.695621] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.696129] pci 0000:00:12.2: reg 10: [mem 0xf044c000-0xf044c0ff]
[ 0.698867] pci 0000:00:12.2: supports D1 D2
[ 0.698873] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.698912] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.698934] pci 0000:00:13.0: reg 10: [mem 0xf044b000-0xf044bfff]
[ 0.699039] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.699505] pci 0000:00:13.2: reg 10: [mem 0xf044a000-0xf044a0ff]
[ 0.702237] pci 0000:00:13.2: supports D1 D2
[ 0.702242] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.702280] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.702396] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.702429] pci 0000:00:14.2: reg 10: [mem 0xf0440000-0xf0443fff 64bit]
[ 0.702524] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.702549] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.702660] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.702738] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.702852] pci 0000:00:15.0: supports D1 D2
[ 0.702899] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.703012] pci 0000:00:15.1: supports D1 D2
[ 0.703053] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[ 0.703167] pci 0000:00:15.2: supports D1 D2
[ 0.703210] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.703232] pci 0000:00:16.0: reg 10: [mem 0xf0449000-0xf0449fff]
[ 0.703337] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.703827] pci 0000:00:16.2: reg 10: [mem 0xf0448000-0xf04480ff]
[ 0.706562] pci 0000:00:16.2: supports D1 D2
[ 0.706567] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.706608] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.706664] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.706715] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.706769] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.706836] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.706886] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.706937] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.706987] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.707118] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.707261] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.707277] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.707281] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.707286] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.707291] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.707295] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.707299] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.707304] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.707308] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.707313] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.707317] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.707322] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.707326] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.707331] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.707335] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.707340] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.707344] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.707349] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.707503] pci 0000:03:00.0: [10ec:8176] type 00 class 0x028000
[ 0.707532] pci 0000:03:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.707578] pci 0000:03:00.0: reg 18: [mem 0xf0300000-0xf0303fff 64bit]
[ 0.707715] pci 0000:03:00.0: supports D1 D2
[ 0.707720] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.714242] pci 0000:00:15.0: PCI bridge to [bus 03-06]
[ 0.714261] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
[ 0.714270] pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.714282] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.714396] pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
[ 0.714428] pci 0000:07:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.714471] pci 0000:07:00.0: reg 18: [mem 0xf0104000-0xf0104fff 64bit pref]
[ 0.714498] pci 0000:07:00.0: reg 20: [mem 0xf0100000-0xf0103fff 64bit pref]
[ 0.714615] pci 0000:07:00.0: supports D1 D2
[ 0.714619] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.722229] pci 0000:00:15.1: PCI bridge to [bus 07]
[ 0.722248] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 0.722264] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.722385] pci 0000:08:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.722423] pci 0000:08:00.0: reg 10: [mem 0xf0200000-0xf0200fff]
[ 0.722603] pci 0000:08:00.0: supports D1 D2
[ 0.722608] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
[ 0.730229] pci 0000:00:15.2: PCI bridge to [bus 08]
[ 0.730251] pci 0000:00:15.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.730297] pci_bus 0000:00: on NUMA node 0
[ 0.730335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.VGA_._PRT]
[ 0.730434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.730540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[ 0.730625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
[ 0.730708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB2._PRT]
[ 0.730795] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AZAL._PRT]
[ 0.730911] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.731287] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.731905] pci0000:00: ACPI _OSC control (0x19) granted
[ 0.735034] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.735285] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.735492] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.735698] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.735919] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.736119] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.736318] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.736467] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.736870] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.736890] vgaarb: loaded
[ 0.736893] vgaarb: bridge control possible 0000:00:01.0
[ 0.737357] SCSI subsystem initialized
[ 0.737364] ACPI: bus type scsi registered
[ 0.737674] libata version 3.00 loaded.
[ 0.737736] ACPI: bus type usb registered
[ 0.737783] usbcore: registered new interface driver usbfs
[ 0.737828] usbcore: registered new interface driver hub
[ 0.738121] usbcore: registered new device driver usb
[ 0.738623] PCI: Using ACPI for IRQ routing
[ 0.741326] PCI: pci_cache_line_size set to 64 bytes
[ 0.741476] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.741481] e820: reserve RAM buffer [mem 0xdf9bf000-0xdfffffff]
[ 0.741486] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff]
[ 0.741489] e820: reserve RAM buffer [mem 0x187000000-0x187ffffff]
[ 0.741694] NetLabel: Initializing
[ 0.741699] NetLabel: domain hash size = 128
[ 0.741701] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.741720] NetLabel: unlabeled traffic allowed by default
[ 0.741999] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.742013] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.744036] Switching to clocksource hpet
[ 0.757877] AppArmor: AppArmor Filesystem Enabled
[ 0.757939] pnp: PnP ACPI init
[ 0.757969] ACPI: bus type pnp registered
[ 0.758303] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.758311] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.758320] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.758761] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.758846] pnp 00:02: [dma 4]
[ 0.758892] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.759015] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.759182] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.759248] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.759381] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.759478] pnp 00:07: Plug and Play ACPI device, IDs SYN1e43 PNP0f13 (active)
[ 0.759600] system 00:08: [io 0x0400-0x04cf] has been reserved
[ 0.759606] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.759611] system 00:08: [io 0x04d6] has been reserved
[ 0.759617] system 00:08: [io 0x0680-0x06ff] has been reserved
[ 0.759622] system 00:08: [io 0x077a] has been reserved
[ 0.759627] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.759632] system 00:08: [io 0x0c14] has been reserved
[ 0.759636] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.759641] system 00:08: [io 0x0c6c] has been reserved
[ 0.759646] system 00:08: [io 0x0c6f] has been reserved
[ 0.759651] system 00:08: [io 0x0cd0-0x0cdb] has been reserved
[ 0.759656] system 00:08: [io 0x0380-0x0387] has been reserved
[ 0.759663] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.759841] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.759848] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.759855] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.962000] pnp: PnP ACPI: found 10 devices
[ 0.962009] ACPI: ACPI bus type pnp unregistered
[ 0.962015] PnPBIOS: Disabled by ACPI PNP
[ 1.004008] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1.004021] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 1.004028] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 1.004090] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 1.004096] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.004101] pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.004118] pci 0000:00:04.0: BAR 14: assigned [mem 0xf0500000-0xf06fffff]
[ 1.004132] pci 0000:00:04.0: BAR 15: assigned [mem 0xf0700000-0xf08fffff 64bit pref]
[ 1.004140] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.004146] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 1.004153] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 1.004161] pci 0000:00:04.0: bridge window [mem 0xf0500000-0xf06fffff]
[ 1.004168] pci 0000:00:04.0: bridge window [mem 0xf0700000-0xf08fffff 64bit pref]
[ 1.004177] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 1.004242] pci 0000:00:15.0: PCI bridge to [bus 03-06]
[ 1.004248] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
[ 1.004256] pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 1.004263] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.004273] pci 0000:00:15.1: PCI bridge to [bus 07]
[ 1.004279] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 1.004290] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 1.004300] pci 0000:00:15.2: PCI bridge to [bus 08]
[ 1.004309] pci 0000:00:15.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 1.004392] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.004397] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.004402] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.004406] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.004411] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.004415] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.004420] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 1.004424] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 1.004429] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 1.004433] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 1.004437] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 1.004441] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 1.004446] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 1.004450] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 1.004455] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 1.004459] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 1.004463] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 1.004468] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.004473] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf06fffff]
[ 1.004477] pci_bus 0000:01: resource 2 [mem 0xf0700000-0xf08fffff 64bit pref]
[ 1.004482] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 1.004487] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 1.004491] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.004495] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.004500] pci_bus 0000:02: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.004504] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.004508] pci_bus 0000:02: resource 10 [mem 0x000d0000-0x000d3fff]
[ 1.004513] pci_bus 0000:02: resource 11 [mem 0x000d4000-0x000d7fff]
[ 1.004517] pci_bus 0000:02: resource 12 [mem 0x000d8000-0x000dbfff]
[ 1.004521] pci_bus 0000:02: resource 13 [mem 0x000dc000-0x000dffff]
[ 1.004526] pci_bus 0000:02: resource 14 [mem 0x000e0000-0x000e3fff]
[ 1.004530] pci_bus 0000:02: resource 15 [mem 0x000e4000-0x000e7fff]
[ 1.004534] pci_bus 0000:02: resource 16 [mem 0x000e8000-0x000ebfff]
[ 1.004539] pci_bus 0000:02: resource 17 [mem 0x000ec000-0x000effff]
[ 1.004543] pci_bus 0000:02: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 1.004547] pci_bus 0000:02: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 1.004552] pci_bus 0000:02: resource 20 [mem 0xfed45000-0xffffffff]
[ 1.004556] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 1.004561] pci_bus 0000:03: resource 1 [mem 0xf0300000-0xf03fffff]
[ 1.004565] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 1.004570] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 1.004575] pci_bus 0000:07: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[ 1.004580] pci_bus 0000:08: resource 1 [mem 0xf0200000-0xf02fffff]
[ 1.004647] NET: Registered protocol family 2
[ 1.004890] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.004932] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.004975] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.005019] TCP: reno registered
[ 1.005025] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.005038] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.005152] NET: Registered protocol family 1
[ 1.005179] pci 0000:00:01.0: Boot video device
[ 1.719036] PCI: CLS 64 bytes, default 64
[ 1.719149] Trying to unpack rootfs image as initramfs...
[ 2.511612] Freeing initrd memory: 22360k freed
[ 2.527646] Simple Boot Flag at 0x44 set to 0x1
[ 2.527875] LVT offset 0 assigned for vector 0x400
[ 2.528012] perf: AMD IBS detected (0x000000ff)
[ 2.528491] Initialise module verification
[ 2.528582] audit: initializing netlink socket (disabled)
[ 2.528606] type=2000 audit(1407427595.404:1): initialized
[ 2.569777] bounce pool size: 64 pages
[ 2.569805] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.573585] VFS: Disk quotas dquot_6.5.2
[ 2.573698] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.575072] fuse init (API version 7.20)
[ 2.575319] msgmni has been set to 1636
[ 2.576518] Key type asymmetric registered
[ 2.576527] Asymmetric key parser 'x509' registered
[ 2.576629] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.576866] io scheduler noop registered
[ 2.576876] io scheduler deadline registered (default)
[ 2.576905] io scheduler cfq registered
[ 2.577226] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 2.577632] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.577793] pciehp 0000:00:04.0:pcie04: HPC vendor_id 1022 device_id 1512 ss_vid 1022 ss_did 1234
[ 2.577860] pciehp 0000:00:04.0:pcie04: service driver pciehp loaded
[ 2.577872] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.683509] ACPI: AC Adapter [ACAD] (on-line)
[ 2.683739] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.683749] ACPI: Power Button [PWRB]
[ 2.683852] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.685615] ACPI: Lid Switch [LID]
[ 2.685737] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.685747] ACPI: Power Button [PWRF]
[ 2.686059] ACPI: acpi_idle registered with cpuidle
[ 3.103555] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.103564] ACPI: Thermal Zone [THRM] (60 C)
[ 3.103640] GHES: HEST is not enabled!
[ 3.103813] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.104173] isapnp: Scanning for PnP cards...
[ 3.107077] Linux agpgart interface v0.103
[ 3.110036] brd: module loaded
[ 3.111506] loop: module loaded
[ 3.112279] libphy: Fixed MDIO Bus: probed
[ 3.112424] tun: Universal TUN/TAP device driver, 1.6
[ 3.112427] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.112522] PPP generic driver version 2.4.2
[ 3.112695] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.112700] ehci-pci: EHCI PCI platform driver
[ 3.112815] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 3.112836] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.112853] QUIRK: Enable AMD PLL fix
[ 3.112858] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.112923] ehci-pci 0000:00:12.2: debug port 1
[ 3.112994] ehci-pci 0000:00:12.2: irq 17, io mem 0xf044c000
[ 3.124726] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.124804] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.124810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.124815] usb usb1: Product: EHCI Host Controller
[ 3.124819] usb usb1: Manufacturer: Linux 3.8.0-42-generic ehci_hcd
[ 3.124824] usb usb1: SerialNumber: 0000:00:12.2
[ 3.125091] hub 1-0:1.0: USB hub found
[ 3.125103] hub 1-0:1.0: 5 ports detected
[ 3.125519] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 3.125534] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.125543] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.125562] ehci-pci 0000:00:13.2: debug port 1
[ 3.125610] ehci-pci 0000:00:13.2: irq 17, io mem 0xf044a000
[ 3.136707] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.136787] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.136792] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.136797] usb usb2: Product: EHCI Host Controller
[ 3.136802] usb usb2: Manufacturer: Linux 3.8.0-42-generic ehci_hcd
[ 3.136806] usb usb2: SerialNumber: 0000:00:13.2
[ 3.137046] hub 2-0:1.0: USB hub found
[ 3.137058] hub 2-0:1.0: 5 ports detected
[ 3.137406] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 3.137420] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 3.137429] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.137449] ehci-pci 0000:00:16.2: debug port 1
[ 3.137496] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0448000
[ 3.148688] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 3.148746] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.148751] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.148756] usb usb3: Product: EHCI Host Controller
[ 3.148761] usb usb3: Manufacturer: Linux 3.8.0-42-generic ehci_hcd
[ 3.148765] usb usb3: SerialNumber: 0000:00:16.2
[ 3.149000] hub 3-0:1.0: USB hub found
[ 3.149012] hub 3-0:1.0: 4 ports detected
[ 3.149336] ehci-platform: EHCI generic platform driver
[ 3.149358] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.149477] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.149491] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 3.149544] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf044d000
[ 3.208602] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.208611] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.208616] usb usb4: Product: OHCI Host Controller
[ 3.208620] usb usb4: Manufacturer: Linux 3.8.0-42-generic ohci_hcd
[ 3.208625] usb usb4: SerialNumber: 0000:00:12.0
[ 3.208856] hub 4-0:1.0: USB hub found
[ 3.208917] hub 4-0:1.0: 5 ports detected
[ 3.209179] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.209193] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 3.209229] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf044b000
[ 3.268499] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.268508] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.268513] usb usb5: Product: OHCI Host Controller
[ 3.268518] usb usb5: Manufacturer: Linux 3.8.0-42-generic ohci_hcd
[ 3.268522] usb usb5: SerialNumber: 0000:00:13.0
[ 3.268765] hub 5-0:1.0: USB hub found
[ 3.268825] hub 5-0:1.0: 5 ports detected
[ 3.269087] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 3.269102] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 3.269143] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0449000
[ 3.328510] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.328519] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.328524] usb usb6: Product: OHCI Host Controller
[ 3.328529] usb usb6: Manufacturer: Linux 3.8.0-42-generic ohci_hcd
[ 3.328533] usb usb6: SerialNumber: 0000:00:16.0
[ 3.328781] hub 6-0:1.0: USB hub found
[ 3.328842] hub 6-0:1.0: 4 ports detected
[ 3.329151] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.329360] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.348491] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.348505] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.348732] mousedev: PS/2 mouse device common for all mice
[ 3.349405] rtc_cmos 00:04: RTC can wake from S4
[ 3.349574] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.349656] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 3.349840] device-mapper: uevent: version 1.0.3
[ 3.349961] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 3.349997] EISA: Probing bus 0 at eisa.0
[ 3.350002] EISA: Cannot allocate resource for mainboard
[ 3.350006] Cannot allocate resource for EISA slot 1
[ 3.350009] Cannot allocate resource for EISA slot 2
[ 3.350011] Cannot allocate resource for EISA slot 3
[ 3.350014] Cannot allocate resource for EISA slot 4
[ 3.350017] Cannot allocate resource for EISA slot 5
[ 3.350020] Cannot allocate resource for EISA slot 6
[ 3.350023] Cannot allocate resource for EISA slot 7
[ 3.350025] Cannot allocate resource for EISA slot 8
[ 3.350028] EISA: Detected 0 cards.
[ 3.350092] cpufreq-nforce2: No nForce2 chipset.
[ 3.350156] cpuidle: using governor ladder
[ 3.350235] cpuidle: using governor menu
[ 3.350243] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.350247] EFI Variables Facility v0.08 2004-May-17
[ 3.350803] ashmem: initialized
[ 3.351023] TCP: cubic registered
[ 3.351258] NET: Registered protocol family 10
[ 3.351607] NET: Registered protocol family 17
[ 3.351630] Key type dns_resolver registered
[ 3.351927] Using IPI No-Shortcut mode
[ 3.352171] ACPI: Battery Slot [BAT0] (battery present)
[ 3.352545] Loading module verification certificates
[ 3.361269] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5664cd67c830d9ac3a319939945f3c115b7c43db'
[ 3.361297] registered taskstats version 1
[ 3.366326] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.367405] Key type trusted registered
[ 3.372279] Key type encrypted registered
[ 3.382341] rtc_cmos 00:04: setting system clock to 2014-08-07 16:06:37 UTC (1407427597)
[ 3.382422] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
[ 3.385017] acpi-cpufreq: overriding BIOS provided _PSD data
[ 3.385158] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.385162] EDD information not available.
[ 3.436271] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 3.493852] isapnp: No Plug & Play device found
[ 3.494158] Freeing unused kernel memory: 796k freed
[ 3.494784] Write protecting the kernel text: 6376k
[ 3.494983] Write protecting the kernel read-only data: 2552k
[ 3.494986] NX-protecting the kernel data: 5912k
[ 3.524103] tsc: Refined TSC clocksource calibration: 1646.493 MHz
[ 3.524119] Switching to clocksource tsc
[ 3.613646] usb 1-3: New USB device found, idVendor=0461, idProduct=4dd8
[ 3.613656] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 3.613661] usb 1-3: Product: HP Webcam-101
[ 3.613666] usb 1-3: Manufacturer: HP Webcam-101
[ 3.613670] usb 1-3: SerialNumber: HP Webcam-101
[ 3.649201] udevd[172]: starting version 175
[ 3.894864] wmi: Mapper loaded
[ 3.904162] ahci 0000:00:11.0: version 3.0
[ 3.904433] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 3.904441] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 3.905530] scsi0 : ahci
[ 3.911545] scsi1 : ahci
[ 3.911793] ata1: SATA max UDMA/133 abar m1024@0xf044e000 port 0xf044e100 irq 19
[ 3.911800] ata2: SATA max UDMA/133 abar m1024@0xf044e000 port 0xf044e180 irq 19
[ 3.971450] usb 5-2: new low-speed USB device number 2 using ohci_hcd
[ 3.991997] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
[ 3.992026] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[ 3.993556] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.993899] r8169 0000:07:00.0: irq 42 for MSI/MSI-X
[ 3.994216] r8169 0000:07:00.0 eth0: RTL8105e at 0xf8492000, 44:1e:a1:e2:ae:53, XID 00a00000 IRQ 42
[ 4.140300] usb 5-2: New USB device found, idVendor=093a, idProduct=2510
[ 4.140316] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.140327] usb 5-2: Product: USB OPTICAL MOUSE
[ 4.140335] usb 5-2: Manufacturer: PIXART
[ 4.185617] usbcore: registered new interface driver usbhid
[ 4.185625] usbhid: USB HID core driver
[ 4.199994] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input4
[ 4.200778] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 4.371264] acpi device:00: registered as cooling_device2
[ 4.371347] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.371461] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 4.403025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.403077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.404612] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OCA1G, max UDMA/100
[ 4.404627] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.406154] ata1.00: configured for UDMA/100
[ 4.406727] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 PB4O PQ: 0 ANSI: 5
[ 4.407012] ata2.00: ATAPI: hp CDDVDW SN-208BB, HH00, max UDMA/100
[ 4.407220] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.407237] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.407389] sd 0:0:0:0: [sda] Write Protect is off
[ 4.407397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.407460] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.417134] ata2.00: configured for UDMA/100
[ 4.426127] scsi 1:0:0:0: CD-ROM hp CDDVDW SN-208BB HH00 PQ: 0 ANSI: 5
[ 4.440090] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.440100] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.440398] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.440591] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.455850] sda: sda1 sda2 < sda5 >
[ 4.457568] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.727835] Disabling lock debugging due to kernel taint
[ 4.728258] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 4.728263] vesafb: scrolling: redraw
[ 4.728268] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 4.729161] vesafb: framebuffer at 0xe0000000, mapped to 0xf8500000, using 5632k, total 5632k
[ 4.729612] Console: switching to colour frame buffer device 200x56
[ 4.739849] fb0: VESA VGA frame buffer device
[ 6.753724] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.323822] init: ureadahead main process (435) terminated with status 5
[ 9.866559] Adding 5873660k swap on /dev/sda5. Priority:-1 extents:1 across:5873660k
[ 11.327289] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.623742] udevd[517]: starting version 175
[ 13.507219] lp: driver loaded but no devices found
[ 13.810069] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.903287] microcode: CPU0: patch_level=0x0500010d
[ 15.041176] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 15.490558] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 15.493376] sp5100_tco: PCI Revision ID: 0x42
[ 15.493452] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 15.493467] sp5100_tco: Last reboot was not triggered by watchdog.
[ 15.496275] sp5100_tco: initialized (0xf84f4b00). heartbeat=60 sec (nowayout=0)
[ 15.511981] cfg80211: Calling CRDA to update world regulatory domain
[ 15.575111] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 15.605503] microcode: CPU1: patch_level=0x0500010d
[ 15.605673] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 15.952451] Linux video capture interface: v2.00
[ 16.122513] kvm: disabled by bios
[ 16.442408] uvcvideo: Found UVC 1.00 device HP Webcam-101 (0461:4dd8)
[ 16.458235] input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input7
[ 16.458556] usbcore: registered new interface driver uvcvideo
[ 16.458562] USB Video Class driver (1.1.1)
[ 16.490420] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1678, fw id: 706628
[ 16.540684] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 16.846221] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 16.999805] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 17.026188] <6>[fglrx] Maximum main memory to use for locked dma buffers: 5473 MBytes.
[ 17.026563] <6>[fglrx] vendor: 1002 device: 9806 count: 1
[ 17.027563] <6>[fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 17.028316] <6>[fglrx] Kernel PAT support is enabled
[ 17.028361] <6>[fglrx] module loaded - fglrx 13.25.5 [Dec 6 2013] with 1 minors
[ 17.039178] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 17.189347] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 17.281073] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 17.281787] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 17.372041] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 17.372576] rtlwifi: wireless switch is on
[ 18.166328] type=1400 audit(1407427612.305:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=945 comm="apparmor_parser"
[ 18.166677] type=1400 audit(1407427612.305:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=893 comm="apparmor_parser"
[ 18.167322] type=1400 audit(1407427612.305:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=945 comm="apparmor_parser"
[ 18.167694] type=1400 audit(1407427612.305:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=893 comm="apparmor_parser"
[ 18.167893] type=1400 audit(1407427612.305:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=945 comm="apparmor_parser"
[ 18.168278] type=1400 audit(1407427612.305:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=893 comm="apparmor_parser"
[ 18.168994] type=1400 audit(1407427612.305:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=892 comm="apparmor_parser"
[ 18.170037] type=1400 audit(1407427612.305:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=892 comm="apparmor_parser"
[ 18.170684] type=1400 audit(1407427612.309:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=892 comm="apparmor_parser"
[ 21.049575] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.243424] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 21.932108] init: failsafe main process (964) killed by TERM signal
[ 22.909830] type=1400 audit(1407427617.053:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1149 comm="apparmor_parser"
[ 23.250224] ppdev: user-space parallel port driver
[ 23.436343] audit_printk_skb: 18 callbacks suppressed
[ 23.436351] type=1400 audit(1407427617.581:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1150 comm="apparmor_parser"
[ 23.442983] type=1400 audit(1407427617.589:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1166 comm="apparmor_parser"
[ 23.444123] type=1400 audit(1407427617.589:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1166 comm="apparmor_parser"
[ 23.446100] type=1400 audit(1407427617.589:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1181 comm="apparmor_parser"
[ 23.447389] type=1400 audit(1407427617.593:22): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1181 comm="apparmor_parser"
[ 23.451806] type=1400 audit(1407427617.597:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1150 comm="apparmor_parser"
[ 23.454750] type=1400 audit(1407427617.601:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1150 comm="apparmor_parser"
[ 23.456903] type=1400 audit(1407427617.601:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1150 comm="apparmor_parser"
[ 23.464786] type=1400 audit(1407427617.609:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1150 comm="apparmor_parser"
[ 23.467344] type=1400 audit(1407427617.613:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1150 comm="apparmor_parser"
[ 24.262265] Bluetooth: Core ver 2.16
[ 24.262310] NET: Registered protocol family 31
[ 24.262315] Bluetooth: HCI device and connection manager initialized
[ 24.262332] Bluetooth: HCI socket layer initialized
[ 24.262338] Bluetooth: L2CAP socket layer initialized
[ 24.262353] Bluetooth: SCO socket layer initialized
[ 24.383624] Bluetooth: RFCOMM TTY layer initialized
[ 24.383656] Bluetooth: RFCOMM socket layer initialized
[ 24.383660] Bluetooth: RFCOMM ver 1.11
[ 24.719970] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.719979] Bluetooth: BNEP filters: protocol multicast
[ 24.719996] Bluetooth: BNEP socket layer initialized
[ 26.457456] init: lightdm main process (1314) killed by TERM signal
[ 29.604982] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.271043] r8169 0000:07:00.0 eth0: link down
[ 30.271091] r8169 0000:07:00.0 eth0: link down
[ 30.271188] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.272226] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.073370] r8169 0000:07:00.0 eth0: link up
[ 32.073400] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 37.933078] fglrx_pci 0000:00:01.0: irq 44 for MSI/MSI-X
[ 37.935203] <6>[fglrx] Firegl kernel thread PID: 1891
[ 37.935398] <6>[fglrx] Firegl kernel thread PID: 1892
[ 37.935588] <6>[fglrx] Firegl kernel thread PID: 1893
[ 37.935779] <6>[fglrx] IRQ 44 Enabled
[ 37.946174] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 37.946183] <6>[fglrx] Reserved FB block: Unshared offset:fb78000, size:4000
[ 37.946187] <6>[fglrx] Reserved FB block: Unshared offset:fb7c000, size:484000
[ 37.946191] <6>[fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 38.670427] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[ 64.098113] usb 5-2: USB disconnect, device number 2
[ 65.776130] usb 5-2: new low-speed USB device number 3 using ohci_hcd
[ 65.944936] usb 5-2: New USB device found, idVendor=093a, idProduct=2510
[ 65.944946] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 65.944951] usb 5-2: Product: USB OPTICAL MOUSE
[ 65.944956] usb 5-2: Manufacturer: PIXART
[ 65.955724] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input12
[ 65.956246] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 82.213268] <6>[fglrx] ATIF platform detected with notification ID: 0x81
pootermachine@pootermachine-HP-Pavilion-g7-Notebook-PC:~/Documents$

It seems that either X or the fglrx driver is not initiated until late in the startup process - around the 30 second mark. It could be that various system services need to start first - and your distribution is not configured to print this output to the console.