Reply to topic

GET CONFIGURATION length det failed

mauricioramos
Registered Member
Posts
4
Karma
0

GET CONFIGURATION length det failed

Sat Nov 16, 2013 1:01 am
Hello, the CD/DVD driver seems to be ok but I can't burn a data DVD. The steps I am performing are:

1. Put new and unuasble DVD-R in driver
2. Open K3b
3. Selects files I wish to burn
4. Click "Burn" button

After this, I get the error. The program does not record a single byte, it process the "project" for a while (tries to determine the size of the image) and splashes the error. the error message I get is in brazilian portuguese ("Não foi possível determinar o tamanho do arquivo de imagem resultante"). In english it would be like "Unable to determine the size of the resulting image file".

The ouptut below was shown in the terminal. It was a try I gave running k3b from the terminal to see what other messages I would see.

The system I am running is:

=> Centos 6.4
=> kernel 2.6.32-358.el6.x86_64
=> K3b version 1.0.5
=> Gnome 2.28.2

Thanks for any support you can give.

++++++++++++++++++++++++++++++++++++++

[mauricio@computador extravol]$ k3b
[mauricio@computador extravol]$ (K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_DVDRAM_GU10N to device /dev/sr0
/dev/sr0 resolved to /dev/sr0
/dev/sr0 is block device (0)
/dev/sr0 seems to be cdrom
bus: 1, id: 0, lun: 0
(K3bDevice::Device) /dev/sr0: init()
(K3bDevice::Device) /dev/sr0 feature: CD Mastering
(K3bDevice::Device) /dev/sr0 feature: CD Track At Once
(K3bDevice::Device) /dev/sr0 feature: CD-RW Media Write Support
(K3bDevice::Device) /dev/sr0 feature: DVD Read (MMC5)
(K3bDevice::Device) /dev/sr0 feature: DVD+R
(K3bDevice::Device) /dev/sr0 feature: DVD+RW
(K3bDevice::Device) /dev/sr0 feature: DVD+R Double Layer
(K3bDevice::Device) /dev/sr0 feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/sr0 feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/sr0 feature: Layer Jump Recording
(K3bDevice::Device) /dev/sr0 unknown profile: 2
(K3bDevice::Device) /dev/sr0: dataLen: 60
(K3bDevice::Device) /dev/sr0: checking for TAO
(K3bDevice::Device) /dev/sr0: checking for SAO
(K3bDevice::Device) /dev/sr0: checking for SAO_R96P
(K3bDevice::Device) /dev/sr0: checking for SAO_R96R
(K3bDevice::Device) /dev/sr0: checking for RAW_R16
(K3bDevice::Device) /dev/sr0: checking for RAW_R96P
(K3bDevice::Device) /dev/sr0: checking for RAW_R96R
(K3bDevice::Device) /dev/sr0: GET PERFORMANCE dataLen = 40
(K3bDevice::Device) /dev/sr0: GET PERFORMANCE successful with reported length: 36
(K3bDevice::Device) /dev/sr0: Number of supported write speeds via GET PERFORMANCE: 2
(K3bDevice::Device) /dev/sr0 : 11080 KB/s
(K3bDevice::Device) /dev/sr0 : 5540 KB/s
(K3bDevice::DeviceManager) setting current write speed of device /dev/sr0 to 11080
/dev/sr0 resolved to /dev/sr0
(K3bDevice::DeviceManager) dev /dev/sr0 already found
(K3bDevice::DeviceManager) found config entry for devicetype: HL-DT-ST DVDRAM GU10N
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 554:28:03 (LBA 2495103) (5109970944 Bytes)
Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes)
Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes)
Layer 2 length: 554:28:03 (LBA 2495103) (5109970944 Bytes)
DiskInfo:
Mediatype: DVD-R Seqüencial
Current Profile: DVD-R Seqüencial
Disk state: empty
Empty: 1
Rewritable: 0
Appendable: 0
Sessions: 0
Tracks: 0
Layers: 1
Capacity: 510:46:46 (LBA 2298496) (4707319808 Bytes)
Remaining size: 510:46:46 (LBA 2298496) (4707319808 Bytes)
Used Size: 00:00:00 (LBA 0) (0 Bytes)
(K3bDevice::Device) /dev/sr0: GET PERFORMANCE dataLen = 40
(K3bDevice::Device) /dev/sr0: GET PERFORMANCE successful with reported length: 36
(K3bDevice::Device) /dev/sr0: Number of supported write speeds via GET PERFORMANCE: 2
(K3bDevice::Device) /dev/sr0 : 11080 KB/s
(K3bDevice::Device) /dev/sr0 : 5540 KB/s
Devices:
------------------------------
Blockdevice: /dev/sr0
Generic device:
Vendor: HL-DT-ST
Description: DVDRAM GU10N
Version: MX05
Write speed: 11080
Profiles: DVD-ROM, DVD-R Seqüencial, DVD-R de Dupla Camada Seqüencial, DVD-R de Dupla Camada com Salto, DVD-RAM, DVD-RW em Sobrescrita Restrita, DVD-RW Seqüencial, DVD+RW, DVD+R, DVD+R de Dupla Camada, CD-ROM, CD-R, CD-RW
Read Cap: DVD-ROM, DVD-R, DVD-R Seqüencial, DVD-R de Dupla Camada, DVD-R de Dupla Camada Seqüencial, DVD-R de Dupla Camada com Salto, DVD-RW, DVD-RW em Sobrescrita Restrita, DVD-RW Seqüencial, DVD+RW, DVD+R, DVD+RW de Dupla Camada, DVD+R de Dupla Camada, CD-ROM, CD-R, CD-RW
Write Cap: DVD-R, DVD-R Seqüencial, DVD-R de Dupla Camada, DVD-R de Dupla Camada Seqüencial, DVD-R de Dupla Camada com Salto, DVD-RW, DVD-RW em Sobrescrita Restrita, DVD-RW Seqüencial, DVD+RW, DVD+R, DVD+R de Dupla Camada, CD-R, CD-RW
Writing modes: SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Sobrescrita Restrita, Salto da Camada
Reader aliases: /dev/sr0
------------------------------
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.

++++++++++++++++++++++++++++++++++++++++
User avatar google01103
Manager
Posts
6668
Karma
25
have you tried using other burning sw?


OpenSuse Leap 42.1 x64, Plasma 5.x

mauricioramos
Registered Member
Posts
4
Karma
0
Hello,

yes. Tried brasero also and a similar error happens. In k3b tried other settings like but none of them helped:

=> set a temporary directory with plenty of space
=> set of output charset to 8859-1
=> set other rock ridge/joliet and extend file naming options

To record the backup I needed to do, had to manually create an iso image and then k3b was able to burn the content ok. The command issued:

genisoimage -o backup.20131116.iso -file-mode 0775 -input-charset iso8859-1 -iso-level 4 -J -log-file backup.20131116.log -path-list ...

Thanks for your support
wolfi323
Registered Member
Posts
1121
Karma
11
OS
Maybe you have a problem with wodim/cdrkit?
Try to use the real cdrecord and mkisofs instead.

You can get it from the multimedia:apps repo:
http://software.opensuse.org/package/cdrecord
http://software.opensuse.org/package/mkisofs
mauricioramos
Registered Member
Posts
4
Karma
0
Hi, for my surprise I did not have this commands installed on the system. Downloaded the source from http://cdrecord.berlios.de/private/cdrecord.html to build on Centos. and now the commands are there but k3b still fails. Is there some extra configuration on k3b to ajust or this was supposed to be a replacement for it? Thanks.
User avatar google01103
Manager
Posts
6668
Karma
25
try this https://bugzilla.redhat.com/show_bug.cgi?id=450739#c4
Now I try to burn DVD-RW. With k3b-1.0.4-5.fc8.x86_64.rpm I get error. When I
activate Manual buffer size and set it to 4MB, DVD is burn. I try to update to
the newest k3b and DVD is also well burn.
The easiest way to solve this problem is to update to the new k3b ;)


what version of K3b? try finding or compiling K3b 1.0.5 http://softlayer-dal.dl.sourceforge.net ... .5.tar.bz2


OpenSuse Leap 42.1 x64, Plasma 5.x

mauricioramos
Registered Member
Posts
4
Karma
0
Hi, i am using version 1.0.5. After restarting the system, I tried to burn another backup set and this time k3b burned it ok. In the sequence, I tried another recording using a re-formated dvd-rw and it hanged at 50%. But just after, a second and third tries went ok using this same dvd-rw. Also creating iso images from the files/data I want to backup is running ok. Even Brasero recorded ok. Anyway, I will keep an eye on it to ensure the behavior normalizes. Thanks you all for your inputs.

 
Reply to topic

Bookmarks



Who is online

Registered users: Baidu [Spider], bartoloni, Bing [Bot], gerdeg, Google [Bot], gui-m, ipwizard, jbutcher, joshiravi, Majestic-12 [Bot], skylerjett, Sogou [Bot]