Reply to topic

K3b DVD .iso burn failure.

TheFoxyShortBus
Registered Member
Posts
2
Karma
0
OS

K3b DVD .iso burn failure.

Thu Dec 09, 2010 3:59 am
OS: Ubuntu 10.10 (Maverick Meerkat)
Laptop: HP HDX 16 with combo DVD/Blu-Ray

I have tried to burn a DVD (Black hawk down with an .iso created from assembling DVD files ripped by DVD fab with DVD shrink) and it has come up with this failure, I have also tried Gnomebaker, and would not like to get anymore coasters.

With K3b, It burned abotu the first 1 and 20 minutes of the movie with out a hitch and then gave me an error report (below) and was wondering if anybody could help me out with this at all. Any help would be appreciated, especially confirmed fixes because Unfortunately blank DVD+R DL are not cheap. If you need more information I will gladly supply it.

Error Section of Log:
Track 01: 3899 of 6776 MB written (fifo 100%) [buf 98%] 2.5x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 1E 77 68 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.178s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 4089135104 bytes
Writing time: 1247.745s
Average write speed 4.2x.
Min drive buffer fill was 3%
Total of 3 possible drive buffer underruns predicted.
Fixating...
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 04 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in session) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 1000s
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 05 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in session) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 1000s
Fixating time: 0.004s
/usr/bin/wodim: fifo had 64600 puts and 64409 gets.
/usr/bin/wodim: fifo was 0 times empty and 57161 times full, min fill was 76%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=2 -sao driveropts=burnfree -data -tsize=3469535s -
Sonic
Registered Member
Posts
7
Karma
0
OS

Re: K3b DVD .iso burn failure.

Thu Dec 09, 2010 12:36 pm
For future reference there is an option in K3B to only simulate the burning - it will go through the process as normal but won't burn to disc.

In addition have you checked if the ISO file itself is working properly - vlc and possibly mplayer can play ISOs directly
TheFoxyShortBus
Registered Member
Posts
2
Karma
0
OS

Re: K3b DVD .iso burn failure.

Fri Dec 10, 2010 8:48 pm
Yes, the ISO plays perfectly off my laptop HDD using VLC. So that doesn't seem to be an issue unless its an error that the burning software can't skip but VLC can.

Also I don't believe the disks were bad cause I burned 2 coasters of my stack, and then burned a disk off my friends computer (albit a different movie cause he didn't have this one) and they burned just fine.

Also, I'm new to K3b, so I have no idea what the simulate options purpose is and what its benefits are.

 
Reply to topic

Bookmarks



Who is online

Registered users: Baidu [Spider], Bing [Bot], Google [Bot], JesseWebb, kyrhammer, Majestic-12 [Bot], Yahoo [Bot]