Reply to topic

[Solved] Problem with KDE neon installation from live USB

User avatar Kowalsk!
Registered Member
Posts
3
Karma
1
OS
Image
Hello everyone,
I'm trying to install KDE neon (neon-user-20201224-0944) on my computer, with a live USB (flashed with RosaImageWriter-2.6.2-lin-x86_64)

When I boot from the live USB, i quikly see "[0.532741] Initramfs unpacking failed: Decoding failed".

Then, the KDE neon desktop is displayed.

When I run "Install system",
"Waiting for 1 module(s)" is displayed, and even after 5 minutes, nothing allows me to install KDE neon.

Code: Select all
journalctl -p err
lines 1-27/27 (END)...skipping...
-- Logs begin at Sat 2020-12-26 16:24:22 UTC, end at Sat 2020-12-26 16:26:48 UTC. --
Dec 26 16:24:22 neon kernel: Initramfs unpacking failed: Decoding failed
Dec 26 16:24:23 neon systemd[1]: Failed to start Migrate UID 1000 from semi-wrong groups to correct ones..
Dec 26 16:24:24 neon smartd[1590]: Device: /dev/sdb [SAT], 46 Currently unreadable (pending) sectors
Dec 26 16:24:24 neon smartd[1590]: Warning via /usr/share/smartmontools/smartd-runner to root produced unexpected output (183 bytes) to STDOUT/STDERR:
Dec 26 16:24:24 neon smartd[1590]: /etc/smartmontools/run.d/10mail:
Dec 26 16:24:24 neon smartd[1590]: Your system does not have /usr/bin/mail.  Install the mailx or mailutils package
Dec 26 16:24:24 neon smartd[1590]: run-parts: /etc/smartmontools/run.d/10mail exited with return code 1
Dec 26 16:24:24 neon smartd[1590]: Warning via /usr/share/smartmontools/smartd-runner to root: failed (32-bit/8-bit exit status: 256/1)
Dec 26 16:24:24 neon smartd[1590]: Device: /dev/sdb [SAT], 46 Offline uncorrectable sectors
Dec 26 16:24:24 neon smartd[1590]: Warning via /usr/share/smartmontools/smartd-runner to root produced unexpected output (183 bytes) to STDOUT/STDERR:
Dec 26 16:24:24 neon smartd[1590]: /etc/smartmontools/run.d/10mail:
Dec 26 16:24:24 neon smartd[1590]: Your system does not have /usr/bin/mail.  Install the mailx or mailutils package
Dec 26 16:24:24 neon smartd[1590]: run-parts: /etc/smartmontools/run.d/10mail exited with return code 1
Dec 26 16:24:24 neon smartd[1590]: Warning via /usr/share/smartmontools/smartd-runner to root: failed (32-bit/8-bit exit status: 256/1)
Dec 26 16:24:25 neon systemd[1862]: pipewire-pulse.service: Failed to execute command: No such file or directory
Dec 26 16:24:25 neon systemd[1862]: pipewire-pulse.service: Failed at step EXEC spawning /usr/bin/pipewire-pulse: No such file or directory
Dec 26 16:24:25 neon systemd[1915]: pipewire-pulse.service: Failed to execute command: No such file or directory
Dec 26 16:24:25 neon systemd[1915]: pipewire-pulse.service: Failed at step EXEC spawning /usr/bin/pipewire-pulse: No such file or directory
Dec 26 16:24:25 neon systemd[1936]: pipewire-pulse.service: Failed to execute command: No such file or directory
Dec 26 16:24:25 neon systemd[1936]: pipewire-pulse.service: Failed at step EXEC spawning /usr/bin/pipewire-pulse: No such file or directory
Dec 26 16:24:25 neon systemd[1956]: pipewire-pulse.service: Failed to execute command: No such file or directory
Dec 26 16:24:25 neon systemd[1956]: pipewire-pulse.service: Failed at step EXEC spawning /usr/bin/pipewire-pulse: No such file or directory
Dec 26 16:24:25 neon systemd[1967]: pipewire-pulse.service: Failed to execute command: No such file or directory
Dec 26 16:24:25 neon systemd[1967]: pipewire-pulse.service: Failed at step EXEC spawning /usr/bin/pipewire-pulse: No such file or directory
Dec 26 16:24:25 neon systemd[1853]: Failed to start PipeWire PulseAudio.
Dec 26 16:24:50 neon pulseaudio[1863]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote applic>


Code: Select all
dmesg
[    0.000000] e820: update [mem 0x86ce2018-0x86d01a57] usable ==> usable
[    0.000000] e820: update [mem 0x86cd1018-0x86ce1e57] usable ==> usable
[    0.000000] e820: update [mem 0x86cd1018-0x86ce1e57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000086cd1017] usable
[    0.000000] reserve setup_data: [mem 0x0000000086cd1018-0x0000000086ce1e57] usable
[    0.000000] reserve setup_data: [mem 0x0000000086ce1e58-0x0000000086ce2017] usable
[    0.000000] reserve setup_data: [mem 0x0000000086ce2018-0x0000000086d01a57] usable
[    0.000000] reserve setup_data: [mem 0x0000000086d01a58-0x00000000874bffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000874c0000-0x00000000874c0fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000874c1000-0x00000000874c1fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000874c2000-0x000000008e71cfff] usable
[    0.000000] reserve setup_data: [mem 0x000000008e71d000-0x000000008eb86fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008eb87000-0x000000008ec2cfff] usable
[    0.000000] reserve setup_data: [mem 0x000000008ec2d000-0x000000008efdafff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000008efdb000-0x000000008fbfefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008fbff000-0x000000008fbfffff] usable
[    0.000000] reserve setup_data: [mem 0x000000008fc00000-0x000000008fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000106effffff] usable
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x8ec2d000  ACPI=0x8ec2d000  SMBIOS=0x8fa67000  MPS=0xfc9f0  ESRT=0x8a413818  MEMATTR=0x8939b018
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: MSI MS-7A72/Z270 PC MATE (MS-7A72), BIOS 1.A0 07/04/2018
[    0.000000] tsc: Detected 3800.000 MHz processor
[    0.001146] tsc: Detected 3799.900 MHz TSC
[    0.001146] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001147] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001152] last_pfn = 0x106f000 max_arch_pfn = 0x400000000
[    0.001154] MTRR default type: write-back
[    0.001154] MTRR fixed ranges enabled:
[    0.001155]   00000-9FFFF write-back
[    0.001156]   A0000-BFFFF uncachable
[    0.001156]   C0000-FFFFF write-protect
[    0.001157] MTRR variable ranges enabled:
[    0.001158]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.001158]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.001159]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.001159]   3 disabled
[    0.001159]   4 disabled
[    0.001160]   5 disabled
[    0.001160]   6 disabled
[    0.001160]   7 disabled
[    0.001160]   8 disabled
[    0.001161]   9 disabled
[    0.001391] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.001487] last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
[    0.006719] found SMP MP-table at [mem 0x000fcc80-0x000fcc8f]
[    0.006726] esrt: Reserving ESRT space from 0x000000008a413818 to 0x000000008a413850.
[    0.006730] e820: update [mem 0x8a413000-0x8a413fff] usable ==> reserved
[    0.006739] check: Scanning 1 areas for low memory corruption
[    0.006743] Using GB pages for direct mapping
[    0.007383] secureboot: Secure boot disabled
[    0.007384] RAMDISK: [mem 0x3abda000-0x3fffdfff]
[    0.007390] ACPI: Early table checksum verification disabled
[    0.007392] ACPI: RSDP 0x000000008EC2D000 000024 (v02 ALASKA)
[    0.007394] ACPI: XSDT 0x000000008EC2D0A8 0000D4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007398] ACPI: FACP 0x000000008EC56418 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.007401] ACPI: DSDT 0x000000008EC2D218 0291FD (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.007403] ACPI: FACS 0x000000008EFDAD80 000040
[    0.007404] ACPI: APIC 0x000000008EC56530 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.007406] ACPI: FPDT 0x000000008EC565B8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007408] ACPI: FIDT 0x000000008EC56600 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007409] ACPI: MCFG 0x000000008EC566A0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.007411] ACPI: SSDT 0x000000008EC566E0 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.007413] ACPI: SSDT 0x000000008EC56A88 003176 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.007414] ACPI: SSDT 0x000000008EC59C00 0025A5 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.007416] ACPI: HPET 0x000000008EC5C1A8 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
[    0.007418] ACPI: SSDT 0x000000008EC5C1E0 000DE5 (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[    0.007419] ACPI: SSDT 0x000000008EC5CFC8 000A2B (v02 INTEL  xh_rvp08 00000000 INTL 20160422)
[    0.007421] ACPI: UEFI 0x000000008EC5D9F8 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.007423] ACPI: SSDT 0x000000008EC5DA40 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.007424] ACPI: LPIT 0x000000008EC5E920 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.007426] ACPI: SSDT 0x000000008EC5E9B8 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.007428] ACPI: SSDT 0x000000008EC5EB00 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.007429] ACPI: SSDT 0x000000008EC5EDA0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.007431] ACPI: SSDT 0x000000008EC61DA8 000517 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.007433] ACPI: DBGP 0x000000008EC622C0 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.007434] ACPI: DBG2 0x000000008EC622F8 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.007436] ACPI: BGRT 0x000000008EC62350 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007437] ACPI: WSMT 0x000000008EC62388 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.007442] ACPI: Local APIC address 0xfee00000
[    0.007574] No NUMA configuration found
[    0.007575] Faking a node at [mem 0x0000000000000000-0x000000106effffff]
[    0.007580] NODE_DATA(0) allocated [mem 0x106efd5000-0x106effffff]
[    0.007745] Zone ranges:
[    0.007746]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007746]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.007747]   Normal   [mem 0x0000000100000000-0x000000106effffff]
[    0.007748]   Device   empty
[    0.007748] Movable zone start for each node
[    0.007750] Early memory node ranges
[    0.007751]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.007751]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.007752]   node   0: [mem 0x0000000000100000-0x00000000874bffff]
[    0.007752]   node   0: [mem 0x00000000874c2000-0x000000008e71cfff]
[    0.007753]   node   0: [mem 0x000000008eb87000-0x000000008ec2cfff]
[    0.007753]   node   0: [mem 0x000000008fbff000-0x000000008fbfffff]
[    0.007753]   node   0: [mem 0x0000000100000000-0x000000106effffff]
[    0.007802] Zeroed struct page in unavailable ranges: 10401 pages
[    0.007803] Initmem setup node 0 [mem 0x0000000000001000-0x000000106effffff]
[    0.007804] On node 0 totalpages: 16766815
[    0.007805]   DMA zone: 64 pages used for memmap
[    0.007805]   DMA zone: 26 pages reserved
[    0.007805]   DMA zone: 3997 pages, LIFO batch:0
[    0.007832]   DMA32 zone: 9056 pages used for memmap
[    0.007832]   DMA32 zone: 579522 pages, LIFO batch:63
[    0.012474]   Normal zone: 252864 pages used for memmap
[    0.012474]   Normal zone: 16183296 pages, LIFO batch:63
[    0.110296] ACPI: PM-Timer IO Port: 0x1808
[    0.110297] ACPI: Local APIC address 0xfee00000
[    0.110301] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.110301] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.110302] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.110302] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.110327] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.110329] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.110329] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.110330] ACPI: IRQ0 used by override.
[    0.110331] ACPI: IRQ9 used by override.
[    0.110332] Using ACPI (MADT) for SMP configuration information
[    0.110333] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.110336] e820: update [mem 0x88e5b000-0x8909bfff] usable ==> reserved
[    0.110342] TSC deadline timer available
[    0.110343] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.110356] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.110357] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.110358] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.110359] PM: Registered nosave memory: [mem 0x86cd1000-0x86cd1fff]
[    0.110360] PM: Registered nosave memory: [mem 0x86ce1000-0x86ce1fff]
[    0.110360] PM: Registered nosave memory: [mem 0x86ce2000-0x86ce2fff]
[    0.110361] PM: Registered nosave memory: [mem 0x86d01000-0x86d01fff]
[    0.110362] PM: Registered nosave memory: [mem 0x874c0000-0x874c0fff]
[    0.110363] PM: Registered nosave memory: [mem 0x874c1000-0x874c1fff]
[    0.110364] PM: Registered nosave memory: [mem 0x88e5b000-0x8909bfff]
[    0.110365] PM: Registered nosave memory: [mem 0x8a413000-0x8a413fff]
[    0.110366] PM: Registered nosave memory: [mem 0x8e71d000-0x8eb86fff]
[    0.110367] PM: Registered nosave memory: [mem 0x8ec2d000-0x8efdafff]
[    0.110367] PM: Registered nosave memory: [mem 0x8efdb000-0x8fbfefff]
[    0.110368] PM: Registered nosave memory: [mem 0x8fc00000-0x8fffffff]
[    0.110369] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.110369] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.110369] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.110370] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.110370] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.110370] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.110370] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.110371] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.110371] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.110371] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.110372] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.110372] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.110373] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.110374] Booting paravirtualized kernel on bare hardware
[    0.110375] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.110379] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.110472] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.110476] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.110477] pcpu-alloc: [0] 0 1 2 3
[    0.110494] Built 1 zonelists, mobility grouping on.  Total pages: 16504805
[    0.110495] Policy zone: Normal
[    0.110496] Kernel command line: BOOT_IMAGE=/casper/vmlinuz boot=casper apparmor=0 quiet splash ---
[    0.112570] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[    0.113574] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.113604] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.115648] Calgary: detecting Calgary via BIOS EBDA area
[    0.115650] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.203769] Memory: 65660904K/67067260K available (14339K kernel code, 2426K rwdata, 4932K rodata, 2720K init, 4956K bss, 1406356K reserved, 0K cma-reserved)
[    0.203773] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.203858] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.203867] Kernel/User page tables isolation: enabled
[    0.203876] ftrace: allocating 44541 entries in 174 pages
[    0.215199] rcu: Hierarchical RCU implementation.
[    0.215200] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.215200]  Tasks RCU enabled.
[    0.215201] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.215201] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.217075] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.217490] random: crng done (trusting CPU's manufacturer)
[    0.217505] Console: colour dummy device 80x25
[    0.217507] printk: console [tty0] enabled
[    0.217519] ACPI: Core revision 20190816
[    0.217732] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.217796] APIC: Switch to symmetric I/O mode setup
[    0.218992] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.223192] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.241720] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8bf270d8d, max_idle_ns: 881590865083 ns
[    0.241723] Calibrating delay loop (skipped), value calculated using timer frequency.. 7599.80 BogoMIPS (lpj=15199600)
[    0.241724] pid_max: default: 32768 minimum: 301
[    0.243578] LSM: Security Framework initializing
[    0.243581] Yama: becoming mindful.
[    0.243664] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.243722] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.243731] *** VALIDATE tmpfs ***
[    0.243819] *** VALIDATE proc ***
[    0.243850] *** VALIDATE cgroup1 ***
[    0.243851] *** VALIDATE cgroup2 ***
[    0.243894] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.243908] process: using mwait in idle threads
[    0.243909] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.243910] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.243911] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.243912] Spectre V2 : Mitigation: Full generic retpoline
[    0.243912] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.243912] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.243913] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.243914] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.243916] TAA: Mitigation: Clear CPU buffers
[    0.243918] SRBDS: Mitigation: Microcode
[    0.243918] MDS: Mitigation: Clear CPU buffers
[    0.244082] Freeing SMP alternatives memory: 40K
[    0.245535] smpboot: CPU0: Intel(R) Core(TM) i5-7600K CPU @ 3.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.245614] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.245618] ... version:                4
[    0.245618] ... bit width:              48
[    0.245619] ... generic registers:      8
[    0.245619] ... value mask:             0000ffffffffffff
[    0.245619] ... max period:             00007fffffffffff
[    0.245620] ... fixed-purpose events:   3
[    0.245620] ... event mask:             00000007000000ff
[    0.245645] rcu: Hierarchical SRCU implementation.
[    0.245721] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.245721] smp: Bringing up secondary CPUs ...
[    0.245721] x86: Booting SMP configuration:
[    0.245721] .... node  #0, CPUs:      #1 #2 #3
[    0.247158] smp: Brought up 1 node, 4 CPUs
[    0.247158] smpboot: Max logical packages: 1
[    0.247158] smpboot: Total of 4 processors activated (30399.20 BogoMIPS)
[    0.247215] devtmpfs: initialized
[    0.247215] x86/mm: Memory block size: 128MB
[    0.256777] PM: Registering ACPI NVS region [mem 0x874c0000-0x874c0fff] (4096 bytes)
[    0.256777] PM: Registering ACPI NVS region [mem 0x8ec2d000-0x8efdafff] (3858432 bytes)
[    0.256777] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.256777] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.256777] pinctrl core: initialized pinctrl subsystem
[    0.256777] PM: RTC time: 16:22:44, date: 2020-12-26
[    0.256777] NET: Registered protocol family 16
[    0.256777] audit: initializing netlink subsys (disabled)
[    0.256777] audit: type=2000 audit(1608999763.036:1): state=initialized audit_enabled=0 res=1
[    0.256777] EISA bus registered
[    0.256777] cpuidle: using governor ladder
[    0.256777] cpuidle: using governor menu
[    0.256777] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.256777] ACPI: bus type PCI registered
[    0.256777] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.256777] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.256777] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.256777] PCI: Using configuration type 1 for base access
[    0.262512] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.262512] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.262512] ACPI: Added _OSI(Module Device)
[    0.262512] ACPI: Added _OSI(Processor Device)
[    0.262512] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.262512] ACPI: Added _OSI(Processor Aggregator Device)
[    0.262512] ACPI: Added _OSI(Linux-Dell-Video)
[    0.262512] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.262512] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.297750] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.301949] ACPI: Dynamic OEM Table Load:
[    0.301953] ACPI: SSDT 0xFFFF9F97E7DA6000 00079B (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.303195] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.303195] ACPI: Dynamic OEM Table Load:
[    0.303195] ACPI: SSDT 0xFFFF9F97E7BE8400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.304150] ACPI: Dynamic OEM Table Load:
[    0.304153] ACPI: SSDT 0xFFFF9F97E7BA5C00 000115 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.305180] ACPI: Dynamic OEM Table Load:
[    0.305183] ACPI: SSDT 0xFFFF9F97E7BA5600 0001A4 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.306816] ACPI: Dynamic OEM Table Load:
[    0.306819] ACPI: SSDT 0xFFFF9F97E7D00000 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.308191] ACPI: Dynamic OEM Table Load:
[    0.308193] ACPI: SSDT 0xFFFF9F97E7BA4600 000197 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.309309] ACPI: Dynamic OEM Table Load:
[    0.309311] ACPI: SSDT 0xFFFF9F97E7BA5200 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.312681] ACPI: Interpreter enabled
[    0.312711] ACPI: (supports S0 S3 S4 S5)
[    0.312711] ACPI: Using IOAPIC for interrupt routing
[    0.312740] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.313690] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.315852] ACPI: Power Resource [PG00] (on)
[    0.316149] ACPI: Power Resource [PG01] (on)
[    0.316439] ACPI: Power Resource [PG02] (on)
[    0.318637] ACPI: Power Resource [WRST] (on)
[    0.318930] ACPI: Power Resource [WRST] (on)
[    0.319225] ACPI: Power Resource [WRST] (on)
[    0.319519] ACPI: Power Resource [WRST] (on)
[    0.319818] ACPI: Power Resource [WRST] (on)
[    0.320124] ACPI: Power Resource [WRST] (on)
[    0.320420] ACPI: Power Resource [WRST] (on)
[    0.320716] ACPI: Power Resource [WRST] (on)
[    0.321007] ACPI: Power Resource [WRST] (on)
[    0.321301] ACPI: Power Resource [WRST] (on)
[    0.321686] ACPI: Power Resource [WRST] (on)
[    0.321987] ACPI: Power Resource [WRST] (on)
[    0.322279] ACPI: Power Resource [WRST] (on)
[    0.322573] ACPI: Power Resource [WRST] (on)
[    0.322864] ACPI: Power Resource [WRST] (on)
[    0.323156] ACPI: Power Resource [WRST] (on)
[    0.323452] ACPI: Power Resource [WRST] (on)
[    0.324572] ACPI: Power Resource [WRST] (on)
[    0.324864] ACPI: Power Resource [WRST] (on)
[    0.325156] ACPI: Power Resource [WRST] (on)
[    0.335480] ACPI: Power Resource [FN00] (off)
[    0.335556] ACPI: Power Resource [FN01] (off)
[    0.335629] ACPI: Power Resource [FN02] (off)
[    0.335701] ACPI: Power Resource [FN03] (off)
[    0.335773] ACPI: Power Resource [FN04] (off)
[    0.336804] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.336808] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.336997] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[    0.337178] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR]
[    0.337178] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.337856] PCI host bridge to bus 0000:00
[    0.337857] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.337858] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.337859] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.337859] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.337860] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.337861] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.337867] pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
[    0.338159] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.338193] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.338389] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.338397] pci 0000:00:08.0: reg 0x10: [mem 0xdf24f000-0xdf24ffff 64bit]
[    0.338532] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
[    0.338549] pci 0000:00:14.0: reg 0x10: [mem 0xdf230000-0xdf23ffff 64bit]
[    0.338602] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.338786] pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
[    0.338803] pci 0000:00:14.2: reg 0x10: [mem 0xdf24e000-0xdf24efff 64bit]
[    0.338955] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
[    0.338970] pci 0000:00:16.0: reg 0x10: [mem 0xdf24d000-0xdf24dfff 64bit]
[    0.339013] pci 0000:00:16.0: PME# supported from D3hot
[    0.339163] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
[    0.339176] pci 0000:00:17.0: reg 0x10: [mem 0xdf248000-0xdf249fff]
[    0.339181] pci 0000:00:17.0: reg 0x14: [mem 0xdf24c000-0xdf24c0ff]
[    0.339187] pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
[    0.339192] pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
[    0.339198] pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
[    0.339203] pci 0000:00:17.0: reg 0x24: [mem 0xdf24b000-0xdf24b7ff]
[    0.339235] pci 0000:00:17.0: PME# supported from D3hot
[    0.339375] pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
[    0.339439] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.339612] pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
[    0.339670] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.339835] pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
[    0.339894] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.340065] pci 0000:00:1f.0: [8086:a2c5] type 00 class 0x060100
[    0.340280] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
[    0.340294] pci 0000:00:1f.2: reg 0x10: [mem 0xdf244000-0xdf247fff]
[    0.340458] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
[    0.340482] pci 0000:00:1f.3: reg 0x10: [mem 0xdf240000-0xdf243fff 64bit]
[    0.340509] pci 0000:00:1f.3: reg 0x20: [mem 0xdf220000-0xdf22ffff 64bit]
[    0.340552] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.340737] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
[    0.340796] pci 0000:00:1f.4: reg 0x10: [mem 0xdf24a000-0xdf24a0ff 64bit]
[    0.340865] pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
[    0.341064] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[    0.341088] pci 0000:00:1f.6: reg 0x10: [mem 0xdf200000-0xdf21ffff]
[    0.341185] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.341342] pci 0000:01:00.0: [10de:1c02] type 00 class 0x030000
[    0.341358] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.341366] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.341375] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.341380] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.341386] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.341399] pci 0000:01:00.0: BAR 3: assigned to efifb
[    0.341454] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.341493] pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
[    0.341505] pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[    0.341622] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.341623] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.341624] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.341626] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.341715] acpiphp: Slot [1] registered
[    0.341721] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.341811] pci 0000:03:00.0: [1b21:2142] type 00 class 0x0c0330
[    0.341834] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf107fff 64bit]
[    0.341876] pci 0000:03:00.0: enabling Extended Tags
[    0.341933] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.342045] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.342048] pci 0000:00:1c.4:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.342136] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400
[    0.342268] pci 0000:04:00.0: supports D1 D2
[    0.342269] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.342372] pci 0000:00:1c.6: PCI bridge to [bus 04-05]
[    0.342418] pci_bus 0000:05: extended config space not accessible
[    0.342481] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.344471] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.344520] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.344567] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.344614] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.344661] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.344708] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.344754] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.344801] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.345729] iommu: Default domain type: Translated
[    0.345827] SCSI subsystem initialized
[    0.345833] libata version 3.00 loaded.
[    0.345833] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.345833] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.345833] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.345833] vgaarb: loaded
[    0.345833] ACPI: bus type USB registered
[    0.345833] usbcore: registered new interface driver usbfs
[    0.345833] usbcore: registered new interface driver hub
[    0.345833] usbcore: registered new device driver usb
[    0.345833] pps_core: LinuxPPS API ver. 1 registered
[    0.345833] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.345833] PTP clock support registered
[    0.345833] EDAC MC: Ver: 3.0.0
[    0.345833] Registered efivars operations
[    0.345833] PCI: Using ACPI for IRQ routing
[    0.373383] PCI: pci_cache_line_size set to 64 bytes
[    0.373428] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.373428] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.373429] e820: reserve RAM buffer [mem 0x86cd1018-0x87ffffff]
[    0.373430] e820: reserve RAM buffer [mem 0x86ce2018-0x87ffffff]
[    0.373430] e820: reserve RAM buffer [mem 0x874c0000-0x87ffffff]
[    0.373431] e820: reserve RAM buffer [mem 0x88e5b000-0x8bffffff]
[    0.373431] e820: reserve RAM buffer [mem 0x8a413000-0x8bffffff]
[    0.373432] e820: reserve RAM buffer [mem 0x8e71d000-0x8fffffff]
[    0.373432] e820: reserve RAM buffer [mem 0x8ec2d000-0x8fffffff]
[    0.373433] e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
[    0.373433] e820: reserve RAM buffer [mem 0x106f000000-0x106fffffff]
[    0.373722] NetLabel: Initializing
[    0.373722] NetLabel:  domain hash size = 128
[    0.373722] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.373722] NetLabel:  unlabeled traffic allowed by default
[    0.374098] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.374100] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.377722] clocksource: Switched to clocksource tsc-early
[    0.384799] *** VALIDATE bpf ***
[    0.384840] VFS: Disk quotas dquot_6.6.0
[    0.384848] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.384864] *** VALIDATE ramfs ***
[    0.384867] *** VALIDATE hugetlbfs ***
[    0.384890] pnp: PnP ACPI init
[    0.385192] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.385193] system 00:00: [io  0x0a10-0x0a1f] has been reserved
[    0.385193] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.385194] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    0.385197] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.385553] pnp 00:01: [dma 0 disabled]
[    0.385660] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.385983] pnp 00:02: [dma 0 disabled]
[    0.386007] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.386131] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.386132] system 00:03: [io  0xffff] has been reserved
[    0.386133] system 00:03: [io  0xffff] has been reserved
[    0.386134] system 00:03: [io  0xffff] has been reserved
[    0.386134] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.386135] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.386137] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.386209] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.386211] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.386223] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.386249] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.386251] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.386456] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.386457] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.386459] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.386460] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.386460] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.386461] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.386462] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.386463] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.386463] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.386464] system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved
[    0.386466] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.386496] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.386497] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.386498] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.386499] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.386499] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.386500] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.386502] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.386749] system 00:09: [io  0xff00-0xfffe] has been reserved
[    0.386750] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.387762] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.387763] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.387764] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.387766] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.388540] pnp: PnP ACPI: found 11 devices
[    0.389273] thermal_sys: Registered thermal governor 'fair_share'
[    0.389273] thermal_sys: Registered thermal governor 'bang_bang'
[    0.389273] thermal_sys: Registered thermal governor 'step_wise'
[    0.389274] thermal_sys: Registered thermal governor 'user_space'
[    0.389274] thermal_sys: Registered thermal governor 'power_allocator'
[    0.393760] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.393781] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.393783] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.393784] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.393786] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.393788] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.393796] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.393798] pci 0000:00:1c.4:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.393802] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.393816] pci 0000:00:1c.6: PCI bridge to [bus 04-05]
[    0.393822] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.393823] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.393823] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.393824] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.393825] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.393825] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.393826] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.393827] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.393827] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.393951] NET: Registered protocol family 2
[    0.394056] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.394248] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.394574] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.394620] TCP: Hash tables configured (established 524288 bind 65536)
[    0.394676] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.394780] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.394869] NET: Registered protocol family 1
[    0.394872] NET: Registered protocol family 44
[    0.395578] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.395586] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.395592] pci 0000:03:00.0: PME# does not work under D0, disabling it
[    0.395759] pci 0000:04:00.0: Disabling ASPM L0s/L1
[    0.395760] pci 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.395762] PCI: CLS 64 bytes, default 64
[    0.395791] Trying to unpack rootfs image as initramfs...
[    0.522347] Initramfs unpacking failed: Decoding failed
[    0.522354] fbcon: Taking over console
[    0.527150] Freeing initrd memory: 86160K
[    0.527206] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.527207] software IO TLB: mapped [mem 0x82cd1000-0x86cd1000] (64MB)
[    0.527349] check: Scanning for low memory corruption every 60 seconds
[    0.527603] Initialise system trusted keyrings
[    0.527616] Key type blacklist registered
[    0.527633] workingset: timestamp_bits=36 max_order=24 bucket_order=0
[    0.528406] zbud: loaded
[    0.528629] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.528713] fuse: init (API version 7.31)
[    0.528723] *** VALIDATE fuse ***
[    0.528724] *** VALIDATE fuse ***
[    0.528773] Platform Keyring initialized
[    0.530841] Key type asymmetric registered
[    0.530842] Asymmetric key parser 'x509' registered
[    0.530846] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.530867] io scheduler mq-deadline registered
[    0.531384] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.531415] efifb: probing for efifb
[    0.531428] efifb: showing boot graphics
[    0.532711] efifb: framebuffer at 0xd1000000, using 3072k, total 3072k
[    0.532712] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.532712] efifb: scrolling: redraw
[    0.532713] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.532759] Console: switching to colour frame buffer device 128x48
[    0.533803] fb0: EFI VGA frame buffer device
[    0.533808] intel_idle: MWAIT substates: 0x142120
[    0.533808] intel_idle: v0.4.1 model 0x9E
[    0.533949] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.534071] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.534085] ACPI: Sleep Button [SLPB]
[    0.534104] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.534112] ACPI: Power Button [PWRB]
[    0.534130] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.534147] ACPI: Power Button [PWRF]
[    0.535164] thermal LNXTHERM:00: registered as thermal_zone0
[    0.535164] ACPI: Thermal Zone [TZ00] (28 C)
[    0.535288] thermal LNXTHERM:01: registered as thermal_zone1
[    0.535289] ACPI: Thermal Zone [TZ01] (30 C)
[    0.535439] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.556225] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.577118] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.578276] Linux agpgart interface v0.103
[    0.579472] loop: module loaded
[    0.579577] libphy: Fixed MDIO Bus: probed
[    0.579578] tun: Universal TUN/TAP device driver, 1.6
[    0.579592] PPP generic driver version 2.4.2
[    0.579615] VFIO - User Level meta-driver version: 0.3
[    0.579668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.579669] ehci-pci: EHCI PCI platform driver
[    0.579675] ehci-platform: EHCI generic platform driver
[    0.579680] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.579681] ohci-pci: OHCI PCI platform driver
[    0.579685] ohci-platform: OHCI generic platform driver
[    0.579689] uhci_hcd: USB Universal Host Controller Interface driver
[    0.579797] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.579800] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.580847] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.580850] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.580971] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.580972] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.580972] usb usb1: Product: xHCI Host Controller
[    0.580973] usb usb1: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[    0.580974] usb usb1: SerialNumber: 0000:00:14.0
[    0.581023] hub 1-0:1.0: USB hub found
[    0.581036] hub 1-0:1.0: 16 ports detected
[    0.582165] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.582167] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.582168] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.582188] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.582188] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.582189] usb usb2: Product: xHCI Host Controller
[    0.582190] usb usb2: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[    0.582190] usb usb2: SerialNumber: 0000:00:14.0
[    0.582263] hub 2-0:1.0: USB hub found
[    0.582274] hub 2-0:1.0: 10 ports detected
[    0.582921] usb: port power management may be unreliable
[    0.583036] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.583039] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.637730] xhci_hcd 0000:03:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
[    0.637857] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.637858] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.637859] usb usb3: Product: xHCI Host Controller
[    0.637859] usb usb3: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[    0.637860] usb usb3: SerialNumber: 0000:03:00.0
[    0.637940] hub 3-0:1.0: USB hub found
[    0.637946] hub 3-0:1.0: 2 ports detected
[    0.638171] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.638173] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.638174] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.638196] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.638206] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.638206] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.638207] usb usb4: Product: xHCI Host Controller
[    0.638208] usb usb4: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
[    0.638208] usb usb4: SerialNumber: 0000:03:00.0
[    0.638282] hub 4-0:1.0: USB hub found
[    0.638286] hub 4-0:1.0: 2 ports detected
[    0.638505] i8042: PNP: No PS/2 controller found.
[    0.638605] mousedev: PS/2 mouse device common for all mice
[    0.638814] rtc_cmos 00:05: RTC can wake from S4
[    0.639288] rtc_cmos 00:05: registered as rtc0
[    0.639296] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.639299] i2c /dev entries driver
[    0.639322] device-mapper: uevent: version 1.0.3
[    0.639381] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
[    0.639393] platform eisa.0: Probing EISA bus 0
[    0.639393] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.639394] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.639395] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.639395] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.639396] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.639396] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.639397] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.639397] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.639398] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.639398] platform eisa.0: EISA: Detected 0 cards
[    0.639400] intel_pstate: Intel P-state driver initializing
[    0.639594] intel_pstate: HWP enabled
[    0.639730] ledtrig-cpu: registered to indicate activity on CPUs
[    0.639732] EFI Variables Facility v0.08 2004-May-17
[    0.665791] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:08 [mem 0xfdb00000-0xfdffffff]
[    0.665793] caller pmc_core_probe+0x7f/0x17f mapping multiple BARs
[    0.665800] intel_pmc_core INT33A1:00:  initialized
[    0.665841] drop_monitor: Initializing network drop monitor service
[    0.665931] NET: Registered protocol family 10
[    0.669402] Segment Routing with IPv6
[    0.669414] NET: Registered protocol family 17
[    0.669433] Key type dns_resolver registered
[    0.669582] RAS: Correctable Errors collector initialized.
[    0.669601] microcode: sig=0x906e9, pf=0x2, revision=0xde
[    0.669619] microcode: Microcode Update Driver: v2.2.
[    0.669621] IPI shorthand broadcast: enabled
[    0.669626] sched_clock: Marking stable (669237062, 380794)->(674592450, -4974594)
[    0.669658] registered taskstats version 1
[    0.669663] Loading compiled-in X.509 certificates
[    0.670054] Loaded X.509 cert 'Build time autogenerated kernel key: 6b3d3d266049f4a4077ed3557f79f9ce7832433a'
[    0.670066] zswap: loaded using pool lzo/zbud
[    0.670094] Key type ._fscrypt registered
[    0.670095] Key type .fscrypt registered
[    0.673006] Key type big_key registered
[    0.674582] Key type encrypted registered
[    0.676060] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.676075] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
[    0.676075] integrity: Loading X.509 certificate: UEFI:MokListRT
[    0.676329] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    0.676664] ima: No TPM chip found, activating TPM-bypass!
[    0.676668] ima: Allocated hash algorithm: sha1
[    0.676672] ima: No architecture policies found
[    0.676676] evm: Initialising EVM extended attributes:
[    0.676677] evm: security.selinux
[    0.676677] evm: security.SMACK64
[    0.676677] evm: security.SMACK64EXEC
[    0.676677] evm: security.SMACK64TRANSMUTE
[    0.676678] evm: security.SMACK64MMAP
[    0.676678] evm: security.apparmor
[    0.676678] evm: security.ima
[    0.676678] evm: security.capability
[    0.676679] evm: HMAC attrs: 0x1
[    0.677522] PM:   Magic number: 0:512:389
[    0.677532] thermal cooling_device4: hash matches
[    0.677708] rtc_cmos 00:05: setting system clock to 2020-12-26T16:22:44 UTC (1608999764)
[    0.678343] Freeing unused decrypted memory: 2040K
[    0.678596] Freeing unused kernel image memory: 2720K
[    0.697893] Write protecting the kernel read-only data: 22528k
[    0.698240] Freeing unused kernel image memory: 2008K
[    0.698339] Freeing unused kernel image memory: 1212K
[    0.704582] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.704583] x86/mm: Checking user space page tables
[    0.710717] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.710718] Run /init as init process
[    0.785461] ahci 0000:00:17.0: version 3.0
[    0.786123] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    0.791077] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.791078] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.791222] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.794869] cryptd: max_cpu_qlen set to 1000
[    0.797757] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.797759] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[    0.799531] AVX2 version of gcm_enc/dec engaged.
[    0.799532] AES CTR mode by8 optimization enabled
[    0.837481] MXM: GUID detected in BIOS
[    0.837605] checking generic (d1000000 300000) vs hw (c0000000 10000000)
[    0.837606] checking generic (d1000000 300000) vs hw (d0000000 2000000)
[    0.837606] fb0: switching to nouveaufb from EFI VGA
[    0.837640] Console: switching to colour dummy device 80x25
[    0.837703] nouveau 0000:01:00.0: NVIDIA GP106 (136000a1)
[    0.862165] scsi host0: ahci
[    0.862230] scsi host1: ahci
[    0.862277] scsi host2: ahci
[    0.862315] scsi host3: ahci
[    0.862367] scsi host4: ahci
[    0.862417] scsi host5: ahci
[    0.862445] ata1: SATA max UDMA/133 abar [email protected] port 0xdf24b100 irq 130
[    0.862448] ata2: SATA max UDMA/133 abar [email protected] port 0xdf24b180 irq 130
[    0.862450] ata3: SATA max UDMA/133 abar [email protected] port 0xdf24b200 irq 130
[    0.862454] ata4: SATA max UDMA/133 abar [email protected] port 0xdf24b280 irq 130
[    0.862456] ata5: SATA max UDMA/133 abar [email protected] port 0xdf24b300 irq 130
[    0.862458] ata6: SATA max UDMA/133 abar [email protected] port 0xdf24b380 irq 130
[    0.917762] usb 1-6: new high-speed USB device number 2 using xhci_hcd
[    0.948435] nouveau 0000:01:00.0: bios: version 86.06.59.00.69
[    0.949530] nouveau 0000:01:00.0: fb: 3072 MiB GDDR5
[    0.956514] [TTM] Zone  kernel: Available graphics memory: 32912960 KiB
[    0.956514] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    0.956515] [TTM] Initializing pool allocator
[    0.956516] [TTM] Initializing DMA pool allocator
[    0.956523] nouveau 0000:01:00.0: DRM: VRAM: 3072 MiB
[    0.956524] nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
[    0.956525] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
[    0.956526] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
[    0.956526] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    0.956527] nouveau 0000:01:00.0: DRM: DCB version 4.1
[    0.956528] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f42 04620030
[    0.956529] nouveau 0000:01:00.0: DRM: DCB outp 04: 04022f82 00020030
[    0.956529] nouveau 0000:01:00.0: DRM: DCB outp 06: 02033f62 04620010
[    0.956530] nouveau 0000:01:00.0: DRM: DCB outp 07: 02844f76 04600020
[    0.956530] nouveau 0000:01:00.0: DRM: DCB outp 08: 02044f72 00020020
[    0.956531] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
[    0.956532] nouveau 0000:01:00.0: DRM: DCB conn 02: 01000231
[    0.956532] nouveau 0000:01:00.0: DRM: DCB conn 03: 00010361
[    0.956533] nouveau 0000:01:00.0: DRM: DCB conn 04: 00020446
[    0.956811] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    0.958510] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.958511] [drm] Driver supports precise vblank timestamp query.
[    1.066390] usb 1-6: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=10.75
[    1.066391] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.066392] usb 1-6: Product: Mass Storage Device
[    1.066392] usb 1-6: Manufacturer: JetFlash
[    1.066393] usb 1-6: SerialNumber: 2486005092
[    1.177868] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.177882] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.177897] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.177910] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.177921] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.177932] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.178269] usb-storage 1-6:1.0: USB Mass Storage device detected
[    1.178380] scsi host6: usb-storage 1-6:1.0
[    1.178418] usbcore: registered new interface driver usb-storage
[    1.178697] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.178698] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.178699] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.179084] usbcore: registered new interface driver uas
[    1.179085] ata5.00: ATA-8: WDC WD10EZRX-00L4HB0, 01.01A01, max UDMA/133
[    1.179086] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.180239] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.180240] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.180240] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.180243] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.180244] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.180245] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.180553] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.180554] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.180555] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.180585] ata3.00: supports DRM functions and may not be fully accessible
[    1.180587] ata1.00: supports DRM functions and may not be fully accessible
[    1.180940] ata5.00: configured for UDMA/133
[    1.181159] ata1.00: disabling queued TRIM support
[    1.181159] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
[    1.181160] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.181199] ata3.00: disabling queued TRIM support
[    1.181200] ata3.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT03B6Q, max UDMA/133
[    1.181201] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.182066] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.182066] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.182067] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.183416] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.183417] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.183418] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.183908] ata1.00: supports DRM functions and may not be fully accessible
[    1.183958] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.183959] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.183960] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.184171] ata3.00: supports DRM functions and may not be fully accessible
[    1.184510] ata1.00: disabling queued TRIM support
[    1.184707] ata3.00: disabling queued TRIM support
[    1.186267] ata1.00: configured for UDMA/133
[    1.186338] ata2.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
[    1.186339] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.186366] ata3.00: configured for UDMA/133
[    1.186384] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    1.186637] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    1.186815] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.186821] sd 0:0:0:0: [sda] Write Protect is off
[    1.186822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.186831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.187051] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.187052] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.187053] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.189578] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.189579] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.189580] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.189876] ata4.00: ATAPI: HL-DT-ST BDDVDRW CH10LS20, 1.01, max UDMA/133
[    1.191085] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.191086] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.191087] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.193769] usb 1-7: new low-speed USB device number 3 using xhci_hcd
[    1.194923] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.194925] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.194925] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.195184] ata2.00: configured for UDMA/133
[    1.195321] scsi 1:0:0:0: Direct-Access     ATA      WDC WD30EZRX-00M 0A80 PQ: 0 ANSI: 5
[    1.195565] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.195753] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    1.195753] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.195793] sd 1:0:0:0: [sdb] Write Protect is off
[    1.195794] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.195807] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 850  3B6Q PQ: 0 ANSI: 5
[    1.195808] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.195977] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.195984] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.195988] sd 2:0:0:0: [sdc] Write Protect is off
[    1.195989] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.196000] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.197613] ata4.00: configured for UDMA/133
[    1.207594]  sda: sda1
[    1.208244] sd 0:0:0:0: [sda] supports TCG Opal
[    1.208245] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.214527] scsi 3:0:0:0: CD-ROM            HL-DT-ST BDDVDRW CH10LS20 1.01 PQ: 0 ANSI: 5
[    1.222307]  sdc: sdc1 sdc2 < sdc5 sdc6 >
[    1.222980] sd 2:0:0:0: [sdc] supports TCG Opal
[    1.222981] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.227229] ata6.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133
[    1.227230] ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.250993] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.250995] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.250995] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.288504] ata6.00: configured for UDMA/133
[    1.357892] nouveau 0000:01:00.0: DRM: allocated 3840x2160 fb: 0x200000, bo 00000000b369ae30
[    1.357977] fbcon: nouveaudrmfb (fb0) is primary device
[    1.430352] Console: switching to colour frame buffer device 240x67
[    1.432185] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
[    1.438821] usb 1-7: New USB device found, idVendor=046d, idProduct=c01e, bcdDevice=22.00
[    1.438822] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.438823] usb 1-7: Product: USB-PS/2 Optical Mouse
[    1.438823] usb 1-7: Manufacturer: Logitech
[    1.440662] sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.440663] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.444500] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    1.445973] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    1.445975] nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug
[    1.446658] hidraw: raw HID events driver (C) Jiri Kosina
[    1.450576] usbcore: registered new interface driver usbhid
[    1.450576] usbhid: USB HID core driver
[    1.451895] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:046D:C01E.0001/input/input3
[    1.452055] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-7/input0
[    1.457827] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.457861] sr 3:0:0:0: Attached scsi generic sg3 type 5
[    1.457962] scsi 4:0:0:0: Direct-Access     ATA      WDC WD10EZRX-00L 1A01 PQ: 0 ANSI: 5
[    1.458100] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    1.458197] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.458198] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[    1.458204] sd 4:0:0:0: [sdd] Write Protect is off
[    1.458205] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.458215] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.458221] scsi 5:0:0:0: Direct-Access     ATA      ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5
[    1.458286] sd 5:0:0:0: Attached scsi generic sg5 type 0
[    1.458311] sd 5:0:0:0: [sde] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    1.458311] sd 5:0:0:0: [sde] 4096-byte physical blocks
[    1.458317] sd 5:0:0:0: [sde] Write Protect is off
[    1.458318] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    1.458326] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.512469] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 30:9c:23:29:a8:70
[    1.512470] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.512524] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[    1.522521] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    1.529866] tsc: Refined TSC clocksource calibration: 3792.000 MHz
[    1.529869] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d51a4e4511, max_idle_ns: 881590775377 ns
[    1.529918] clocksource: Switched to clocksource tsc
[    1.538924]  sde: sde1 sde2 sde3 sde4 sde5
[    1.539426] sd 5:0:0:0: [sde] Attached SCSI disk
[    1.569860] usb 1-8: new low-speed USB device number 4 using xhci_hcd
[    1.697260]  sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[    1.697587] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.722608] usb 1-8: New USB device found, idVendor=413c, idProduct=2005, bcdDevice= 1.05
[    1.722608] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.722609] usb 1-8: Product: DELL USB Keyboard
[    1.722610] usb 1-8: Manufacturer: DELL
[    1.726085] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:413C:2005.0002/input/input4
[    1.786021] hid-generic 0003:413C:2005.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:14.0-8/input0
[    1.913845] usb 1-12: new high-speed USB device number 5 using xhci_hcd
[    2.066563] usb 1-12: New USB device found, idVendor=11b0, idProduct=6148, bcdDevice=97.22
[    2.066564] usb 1-12: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[    2.066565] usb 1-12: Product: FCR-HS219/1 Mobile Reader
[    2.066565] usb 1-12: Manufacturer: Kingston
[    2.066566] usb 1-12: SerialNumber: 000056178
[    2.068081] usb-storage 1-12:1.0: USB Mass Storage device detected
[    2.068382] scsi host7: usb-storage 1-12:1.0
[    2.104492]  sdd: sdd1
[    2.105088] sd 4:0:0:0: [sdd] Attached SCSI disk
[    2.202289] scsi 6:0:0:0: Direct-Access     JetFlash Transcend 32GB   1.00 PQ: 0 ANSI: 6
[    2.202475] sd 6:0:0:0: Attached scsi generic sg6 type 0
[    2.202683] sd 6:0:0:0: [sdf] 61734912 512-byte logical blocks: (31.6 GB/29.4 GiB)
[    2.202795] sd 6:0:0:0: [sdf] Write Protect is off
[    2.202796] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00
[    2.202932] sd 6:0:0:0: [sdf] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[    2.223243]  sdf: sdf1 sdf2
[    2.224019] sd 6:0:0:0: [sdf] Attached SCSI removable disk
[    3.005762] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.085849] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.099033] scsi 7:0:0:0: Direct-Access     Kingston FCR-HS219/1      9722 PQ: 0 ANSI: 0
[    3.099936] scsi 7:0:0:1: Direct-Access     Kingston FCR-HS219/1      9722 PQ: 0 ANSI: 0
[    3.100821] scsi 7:0:0:2: Direct-Access     Kingston FCR-HS219/1      9722 PQ: 0 ANSI: 0
[    3.101660] scsi 7:0:0:3: Direct-Access     Kingston FCR-HS219/1      9722 PQ: 0 ANSI: 0
[    3.101844] sd 7:0:0:0: Attached scsi generic sg7 type 0
[    3.101907] scsi 7:0:0:1: Attached scsi generic sg8 type 0
[    3.101962] scsi 7:0:0:2: Attached scsi generic sg9 type 0
[    3.102004] scsi 7:0:0:3: Attached scsi generic sg10 type 0
[    3.118902] sd 7:0:0:1: [sdh] Attached SCSI removable disk
[    3.119701] sd 7:0:0:3: [sdj] Attached SCSI removable disk
[    3.134280] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[    3.135482] sd 7:0:0:2: [sdi] Attached SCSI removable disk
[    4.778788] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    4.800925] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null)
[    5.244103] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[    5.294122] EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null)
[    5.346316] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null)
[    5.403351] EXT4-fs (sde4): mounted filesystem with ordered data mode. Opts: (null)
[    5.465388] EXT4-fs (sde5): mounted filesystem with ordered data mode. Opts: (null)
[    5.553183] ISO 9660 Extensions: Microsoft Joliet Level 3
[    5.555239] ISO 9660 Extensions: RRIP_1991A
[    5.875837]  sdf: sdf1 sdf2 sdf3
[   16.876375] ISO 9660 Extensions: Microsoft Joliet Level 3
[   16.877191] ISO 9660 Extensions: RRIP_1991A
[   16.951052] EXT4-fs (sdf3): mounted filesystem with ordered data mode. Opts: (null)
[   97.105764] Adding 31249404k swap on /dev/sdc5.  Priority:-2 extents:1 across:31249404k SSFS
[   98.259783] systemd[1]: Inserted module 'autofs4'
[   98.324505] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   98.341774] systemd[1]: Detected architecture x86-64.
[   98.357966] systemd[1]: Set hostname to <neon>.
[   98.359089] systemd[1]: Initializing machine ID from random generator.
[   98.447326] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[   98.472677] systemd[1]: Created slice system-modprobe.slice.
[   98.472852] systemd[1]: Created slice User and Session Slice.
[   98.472906] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   98.473134] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   98.473156] systemd[1]: Reached target User and Group Name Lookups.
[   98.473168] systemd[1]: Reached target Remote File Systems.
[   98.473184] systemd[1]: Reached target Slices.
[   98.473196] systemd[1]: Reached target Swap.
[   98.473258] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   98.473496] systemd[1]: Listening on LVM2 poll daemon socket.
[   98.473646] systemd[1]: Listening on Syslog Socket.
[   98.473695] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   98.473963] systemd[1]: Listening on Journal Audit Socket.
[   98.474028] systemd[1]: Listening on Journal Socket (/dev/log).
[   98.474106] systemd[1]: Listening on Journal Socket.
[   98.474189] systemd[1]: Listening on udev Control Socket.
[   98.474254] systemd[1]: Listening on udev Kernel Socket.
[   98.475140] systemd[1]: Mounting Huge Pages File System...
[   98.476136] systemd[1]: Mounting POSIX Message Queue File System...
[   98.476724] systemd[1]: Mounting Kernel Debug File System...
[   98.477229] systemd[1]: Mounting Kernel Trace File System...
[   98.477947] systemd[1]: Starting Journal Service...
[   98.478411] systemd[1]: Starting Availability of block devices...
[   98.478932] systemd[1]: Starting Set the console keyboard layout...
[   98.479640] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   98.480087] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   98.480114] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[   98.480394] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   98.481684] systemd[1]: Starting Load Kernel Modules...
[   98.482201] systemd[1]: Starting Remount Root and Kernel File Systems...
[   98.482670] systemd[1]: Starting udev Coldplug all Devices...
[   98.483116] systemd[1]: Starting Uncomplicated firewall...
[   98.484727] systemd[1]: Mounted Huge Pages File System.
[   98.484819] systemd[1]: Mounted POSIX Message Queue File System.
[   98.484890] systemd[1]: Mounted Kernel Debug File System.
[   98.484959] systemd[1]: Mounted Kernel Trace File System.
[   98.498228] systemd[1]: Finished Availability of block devices.
[   98.498538] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   98.498797] systemd[1]: Finished Uncomplicated firewall.
[   98.509235] systemd[1]: Finished Remount Root and Kernel File Systems.
[   98.509795] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   98.509817] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   98.510288] systemd[1]: Starting Load/Save Random Seed...
[   98.510775] systemd[1]: Starting Create System Users...
[   98.516655] systemd[1]: Finished Load/Save Random Seed.
[   98.524881] systemd[1]: Finished Create System Users.
[   98.525417] systemd[1]: Starting Create Static Device Nodes in /dev...
[   98.532315] systemd[1]: Finished Create Static Device Nodes in /dev.
[   98.532884] systemd[1]: Starting udev Kernel Device Manager...
[   98.551102] systemd[1]: Finished Set the console keyboard layout.
[   98.554662] lp: driver loaded but no devices found
[   98.557370] ppdev: user-space parallel port driver
[   98.558706] parport_pc 00:01: reported by Plug and Play ACPI
[   98.558775] parport0: PC-style at 0x378, irq 5 [PCSPP]
[   98.581318] systemd[1]: Started udev Kernel Device Manager.
[   98.589384] systemd[1]: Started Journal Service.
[   98.598890] systemd-journald[1203]: Received client request to flush runtime journal.
[   98.657780] lp0: using parport0 (interrupt-driven).
[   98.914706] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   99.060401] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[   99.060402] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   99.060402] RAPL PMU: hw unit of domain package 2^-14 Joules
[   99.060402] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   99.133783] snd_hda_intel 0000:01:00.1: Disabling MSI
[   99.133799] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   99.170997] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   99.170998] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   99.170999] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   99.170999] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   99.170999] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   99.171000] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   99.171001] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   99.171002] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   99.218622] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[   99.218652] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[   99.218682] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[   99.218707] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[   99.220247] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[   99.873945] intel_rapl_common: Found RAPL domain package
[   99.873946] intel_rapl_common: Found RAPL domain core
[   99.873947] intel_rapl_common: Found RAPL domain dram
[  102.302822] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[  102.302933] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[  102.303039] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[  102.304945] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[  102.305522] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[  102.305643] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[  102.305770] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[  104.866164] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  104.866212] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[  427.576133] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[  427.728895] usb 1-2: New USB device found, idVendor=13fe, idProduct=4200, bcdDevice= 1.00
[  427.728901] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  427.728904] usb 1-2: Product: USB DISK 2.0
[  427.728907] usb 1-2: Manufacturer:         
[  427.728909] usb 1-2: SerialNumber: 070C61BE01887C98
[  427.730152] usb-storage 1-2:1.0: USB Mass Storage device detected
[  427.730389] scsi host8: usb-storage 1-2:1.0
[  428.761985] scsi 8:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 6
[  428.762513] sd 8:0:0:0: Attached scsi generic sg11 type 0
[  429.470722] sd 8:0:0:0: [sdk] 15654912 512-byte logical blocks: (8.02 GB/7.46 GiB)
[  429.471545] sd 8:0:0:0: [sdk] Write Protect is off
[  429.471549] sd 8:0:0:0: [sdk] Mode Sense: 23 00 00 00
[  429.472374] sd 8:0:0:0: [sdk] No Caching mode page found
[  429.472383] sd 8:0:0:0: [sdk] Assuming drive cache: write through
[  429.500378]  sdk: sdk1
[  429.503419] sd 8:0:0:0: [sdk] Attached SCSI removable disk
[  443.210040] FAT-fs (sdk1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[email protected]:~$



If anyone has a tip, that would be great.

Anyway, thank you for reading, stay safe, and have a nice day.
User avatar Kowalsk!
Registered Member
Posts
3
Karma
1
OS
Image
I have unplugged all my hard disks before starting my computer.
Image
W87.eu
Registered Member
Posts
1
Karma
0
Hello!
In my case it was neon-user-20210401-0944... The same problem. Kowalsk!'s solution worked (thank you! ^-^ ).

I have unplugged all my hard disks before starting my computer.

I'd like to add that out of all my HDDs/SSD it was necessary to unplug only my external (USB 3.0) Toshiba with NTFS.
After the installation and booting from the SSD, Toshiba seems to be working fine (auto-mounted etc.).

 
Reply to topic

Bookmarks



Who is online

Registered users: badofum, Baidu [Spider], Bing [Bot], duns, Google [Bot], Ignacio Serantes, mfraser, mouse, Sogou [Bot], thunder422, Yahoo [Bot]